j o r used for sale

Key data: 851 KW, 851 kVA, 400 V

Jenbacher J316, 851 KWe 400V 50 Hz, Gas fired Cogeneration power plant. Year 2017, Zero hour. Installed but unused. Complete with 1 x J316 gas generator, gas control panel and floorstanding circuit breaker cubicle, and 1 no. Flue gas & Hot water type Absorption Chiller of 850KW heating, 954 KW cooling.

Key data: 305 KW, 380 kVA

We currently offer: Number 71 John Deere generator set Magnaplus Generator Power 380 KVA / 305 KW RPM 1500 Hz 50 Hours: 7033 Year of manufacture 2004 Metrics: L: 3.75m H: 2.60m W: 1.35m Weight: 5 tons The engine of the generator turns, but does not start. You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 24 KW, 30 kVA

We currently offer: Number 67 Generator sets Gesan Engine John Deere Power: 30 KVA / 24 KW Hz 50 Year of construction 2003 Operating hours 10654 / 9933 Connection: 32A, 63A, socket Metrics: L: 2.60m H: 1.65m W: 1.10m Weight: 1275 kg Generator set starts but engine does not start You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

grinding length: 500 mm grinding width: 200 mm workpiece height: 300 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ,6 1,5 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laboratory mill Quadrumat Junior, No.156, 0,35kW, used, cleaned, overhauled: glass pane replaced by Plexiglas, completely restocked (rollers and motor), condition of the rollers medium, test run, SECU-Test DGUV V3 / DIN EN 50678 / VDE0701

A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.

A total of explosion-proof 6 low-lift and high-lift trucks as well as 6 manual pallet trucks from the manufacturers Jungheinrich, Still, and Hawker are available.

Key data: 1800 KG, 75600 mm, 6450 mm

Jungheinrich MPB pallet rack – approx. 75.6 m | Height 6.45 m | Floor + 3 | Second-hand goods With a length of approx. 75.6 m and a height of 6.45 m, this used Jungheinrich MPB pallet rack offers a high-performance heavy-duty rack for industrial storage requirements. The racking system is designed for 324 pallet spaces and impresses as a modular high rack with shelf loads of up to 1,800 kg per level. The combination of galvanized rack frames and painted trusses makes this storage rack the ideal choice for logistics centers, industrial companies and large warehouses. If you want to buy a used pallet rack, you can get a flexible and immediately available industrial rack for the efficient storage of Euro pallets. Customizable to your desired size: The shelf uprights can be individually converted to your desired height – precisely and professionally in our workshop. Contact us  ...

Key data: 2700 KG, 101000 mm, 75000 mm

Jungheinrich Delta – 101 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...

Key data: 4020 mm, 1 mm

with material thickness adjustment, hydraulics on the left side of the machine, without roller shears, bending beam with removable attachment rail approx. 8mm, 3 stop fingers, control on the swivel arm, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 4020 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.5 mm Sheet thickness max. VA: 0.8 mm Back gauge (max.): 1000 mm Projection: 1000 mm Colour: blue Total power requirement: 16 A Approx. space required: 6000 x 2000 x 1900 mm Weight approx.: 5000 kg Upper beam stroke (opening width): 200 mm without roller scissors Number of stands: 5 pieces Bending angle (max.): 145 degrees Machine Number: 0040-01

For sale is a used HP Multi Jet Fusion 540 3D printer. The HP Jet Fusion 540 is known for its reliability, efficiency, and high-precision results. Its ideal for small to medium production runs and is perfect for prototyping, functional parts, or complex design requirements., The device was purchased for R&D purposes to print prototypes during development. Throughout its lifetime, it was used only lightly—on average, about once a week. The printer is therefore in very good condition., Special features:, • Efficient material utilization: Up to 80% of the material can be reused, reducing printing costs. The machine automatically mixes the old and new materials., ● High precision: Ideal for industrial applications where precision detail and dimensional accuracy are required., ● Easy to use: User-friendly interface and software simplify the workflow., Condition and mainten ...

Key data: 2700 KG, 50400 mm, 7500 mm

Jungheinrich Delta – 50.40 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...

Key data: 2700 KG, 14100 mm, 7500 mm

Jungheinrich Delta – 14.10 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...

Key data: 2700 KG, 14100 mm, 7500 mm

Jungheinrich Delta – 14.10 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...

Height=1.1 m, Overall length= 0.65 m, Overall width= 0.45 m, Net weight= 68 kg,

Height=1.69 m, Overall length= 0.81 m, Overall width= 1.57 m, Net weight= 250 kg,

Height=1.6 m, Overall length= 0.7 m, Overall width= 0.7 m, Net weight= 320 kg,

Height=1.22 m, Overall length= 0.56 m, Overall width= 0.57 m, Net weight= 145 kg,

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material color: green Box profile: 155 x 55 mm Agraffe: 4 hooks Clear width: 3,610 mm 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

We are offering for sale a Analytik Jena PlasmaQuant MS Elite S including ASX560 autosampler Year of Manufacture: 2021 Find more here - / Contact us at -

A compact lawn tractor John Deere is available. Engine: Yanmar 3-cylinder diesel engine, engine power: approx. 22HP, displacement: 894cm³, machine dimensions X/Y/Z: approx. 1900mm/1100mm/1200mm, weight: approx. 450kg. Includes rear spreader and snow plough. An on-site inspection is possible.

cutting range for steel to: 35.0 TS mm cutting range for steel to: 25.0 QS mm ampere: 20 - 65 Ampere cutting medium: Druckluft voltage: 400 V output: Eingang 7.8 KW weight: 51.5 kg range L-W-H: 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc properties - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage su ...

cutting range for steel to: 12.0 TS mm cutting range for steel to: 8.0 QS mm capacity at 100%: 30.0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4.9 KW voltage: 230 V weight: 17,9 kg range L-W-H: 480 x 210 x 340 mm The Avalon 40.1 is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system - Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the . pilot ...

cutting range for steel to: 15.0 TS mm cutting range for steel to: 10.0 QS mm capacity at 100%: 25.0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere voltage: 230 V Air consumption: 230 l/min. output: Eingang 4.9 KW weight: 8.0 kg range L-W-H: 505 x 147 x 305 mm The Avalon 40.1 is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system - Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts ...

length: 1000 mm width: 750 mm Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 500 mm grinding width: 200 mm workpiece height: 300 mm total power requirement: 3 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,621,7 m Package 5 x JUNG HF 50 EXW near Frankfurt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Lindner Model: Jupiter 3200 Year of Manufacture: 2008 Type of Machine : Pre Shredder Operating Hours : 54,000 h Throughput: ~60 t/h (domestic and commercial waste) Scope of Supply: - Shredder unit - Frequency converter - Control cabinet - Hydraulic unit - Recooler Find more here - / Contact us at -

JUARISTI MDR 205 - CNC Plate Boring Mill Year of construction : 1992 Electrical & Electronics Overhaul : 2024 Spindle : 205 mm ( Ø ) ISO 50 X : 8,000 mm Y : 3,000 mm W : 1,250 mm ( spindle ) Z : 500 mm (tower) Z1 : 2,000 mm (table) CNC turntable : 3,000 x 2000 mm – 30 T Spindle speed : 900 rpm Spindle motor : 34 kW Total power : 74 kW Machine weight : 100 T (approx.) Control : FAGOR 8055 Angular Translation Head Base plate : 2,060 mm x 3,210mm (3 pieces) Conveyor

Key data: 8000 mm, 3 mm

Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...

workpiece diameter: 350 mm workpiece weight: 99999999 kg workpiece height: 240 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während de ...

Item: AC SERVO DRIVER (JSDEP-20A) Qty: 10 units Please contact Ms Puteri at 012-8057943 if yre interested

Size: 0x0 Equipments: Good condition without any damage 4 head paper drills

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material color: RAL1007 yellow Box profile: 100 x 50 mm Truss Type: N100x50|SEG5 Agraffe: 5 hooks Clear width: 1,810 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Band saw Jäspa Compakt 2

1 A&F Butter Pieces Carton Packing Machine Molded Butter Carton Packing machine for 2 pieces of butter By A&F Jagenberg Group Formats: 25p0 g, xxx g Type: 720/2.25.W4 Item no.: 930390 B Built in 1994 With garage content behind the A&F machine

Used autoclave made by Jugema PPUH type Autoclave 250 (E). New 2017. Technical data: - Power supply: 3/N/PE AC 400/230V, - Power: 22.5 kW, - Working pressure: 3 bar, - Working temperature: 0 - 133 °C, - Test pressure: 4.5 bar, - Capacity 250 L.

3. J616GS E 02 Engines (3 units) 2000 kW Power: 2700 kVA Stamford alternator General overhaul at 30,000 hours Operating hours since overhaul: 36,000 Year of manufacture: 1999 1. J616 GSC 01 Engine (1 unit) Power: 2700 kVA Stamford alternator General overhaul Operating hours since overhaul: 40,000 Year of manufacture: 1997 Scope of supply: Diane control panel ALSTHOM transformers (4 units: 4x2500 kVA) Gas line Heat exchanger Fume exchanger Pumps Table cooler - (Radiators) Oil tank

- Seperate coolant and frequency converter - Last service & Test Log in 2018 - Run out in 1 uM

- Industrial Electric stacker truck - Loading logistics and carhgo boxes for airport - Ride on Operations - Fork length 2600 mm - Lifting height 500 mm - Distance between fork 1600 mm - Fork width 200 mm - Batteries 48V 4 PZS620 with 620 Ah ans 939 kg - Charger included SNB 2100 Hp  - Working hours only 75 H    

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...

5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal ov ...

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 300 mm workpiece weight: 999 kg workpiece height: 999 mm grinding length: mm grinding width: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Ausstattung: -Digitalanzeige senkrecht Achse -Automatische Zustellung -Automatische Endabschaltung programmierbar -Schleifspindelantrieb mit stufenloser, elektronischer Drehzahlregelung -stufenlos regelbarer Quervorschub, und Tischdrehung -24V Magnetspannplatte 300 mm -diverse Arbeitsschutzeinrichtungen z.B. Schutzhaubenüberwachung, Betriebszustandsanzeige per Ampel -Schmierölstandsüberwachung -die Maschine wurde 2015 generalüberholt, damals Austausch der gesamten Elektrik auf SPS-Steuerung und 24V Steuerspannung -Papierbandfilteranlage speziell für diese Maschine passend Folgende Arbeiten wurden nun noch durchgeführt: -Austausch Faltenbalg und Riemen -Schleifspindel neu gelager ...

Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With saw blade welder Ideal BS0/16 with band shears and whetstone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very neat condition

Guide and tension spindle lathe Lathe Lathe Weisser Heilbronn Junior Heidenhain Control with cabin incl. oil pan Last test 05/2025 (see picture) The machine is in perfect condition and can be delivered nationwide for € 350. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Height=1.68 m, Overall length= 0.95 m, Overall width= 0.8 m, Net weight= 170 kg,

turning length: 1500 mm turning diameter: 475 mm turning dia. over face-slide: 290 mm turning dia. in gap: 655 mm turning speed range: 14.0 - 2000 U/min feeds - longitudinal: 0.05 - 0.736 mm/min spindle passage: 61.0 mm tail stock: MK 4 quill stroke: 200 mm diameter of quill: Ø 70.0 mm spindle head: DIN 55022 GR 6 voltage: 380 V total power requirement: 7.5 kW weight: 2400 kg range L-W-H: 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition () With original documentation + machine card Features: - Robust electric motor-driven conventional lathe - KLOPFER 4-jaw chuck Ø 200 - MULTIFIX steel holder with 3x inserts - Movable steel holder guard - Adjustable bed stop - Movable tailstock incl. center point - Swiveling machine light - Machine swing feet - Chip guard (movable from behind) - EMERGENCY stop button at the front - Original operating instructi ...

roll diameter: 420 mm throat: 405 mm workpiece height: 380 mm cutting speed: 16 - 2200 m/min table surface area: 615 x 615 mm saw band length: 3450/3650x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 1250 x 1000 x 2100 mm From a training workshop Good condition () Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Key data: 2647 KW, 1000 1/min

Surplus/Never used or installed, High suction pressure compression set unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!