j o r used for sale

Type: FRIGoPACK FPL150G var Serial number: 12842 Year of construction: 2013 Refrigerant: NH3, R717 Compressor: GEA Grasso PR-P55S-28 Flow rate: 966 m3/h Working pressure: max 21 Bar Power: 3 x 380V, 60Hz, 162kW Dimensions: 5000 x 2200 x 2450 mm Weight: 5400 kg

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Work bays: 1, Working length max mm: 800, Dovel diameter mm: 6, Number of doveling tools: 6, Drilling beam swivel-mounted: no, Number of drill spindles: 25, Lochraster: yes, Drilling engine kW: 1,2, Working range max mm: 60, Dovel insertion: yes, Work piece clamping: yes, Work piece support: yes, Work stations: 2, Drilling depth: 50, Drilling hight: 50, Year :1994

Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992

Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993

Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991

Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018

Manufacturer: Jet, Type: JSS-3-6-44-800, Control: yes, Year: 2007, Filter system - negative pressure: yes, Volume flow rate m³/h: 99.900, Filter surface in m²: 800, Cleaning of scavenging air: yes, Electronic control board: yes, FREE TEXT: Breite 2950 mm Höhe 9720 mm, Year :2007

Manufacturer: Umrichter unbekann, Type: JNTKBCBA7R50BE-UF, Size: 5,5 kw, kVA: Amper 13,

Manufacturer: Berg und Schmid Kappsäge, Type: Typ Junior, Number of saw motors: 1, kW output per motor: 0,55,

Manufacturer: Jago Lochreihenbohrmaschine, Type: B29PN, Year: 1992, Control: hand, Drilling engine kW: ca.1,5, Working range max mm: 60, Drilling support horizontal: 1, Drilling beams: 1, Drilling beam swivel-mounted: yes, Number of drill spindles: ca.27, Lochraster: 32, Swivel pneumatically 90-45°: hand, Foot switch: yes, Max. drilling depth in mm: 60, Year :1992

Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,

Manufacturer: Busellato, Type: Jet 6000 XXL, Year: 1999, Working range X: 4600, Working range Y-axis: 1700, Working range Z: 150, Vertical drills-X: 11, Drill vertical Y: 9, Horizontal drills-X: 2+2, Drill horizontal Y: 2+2, Year :1999

Manufacturer: Jungheinrich, Type: MP, Year: 1994, 1stupright frame pieces Qty.: 10, 1stheight mm depth mm: 4000 / 700, 1.Transverse beam Qty.: 18, 1.Transverse beam length mm: 3900, 2.Transverse beam Qty.: 4, 2.Transverse beam length mm: 1900, Compartment load in kg: 1997, Year :1994

Manufacturer: Jsting , Type: PFS 1800, Year: 1964, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: ca.80, Cutting lenght mm: 1800, Schnittbreite min-max mm: 850, Working hight mm: ca.40, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Year :1964

Manufacturer: Jungheinrich, Type: Hubwagen, Fork length in mm: 1200, Lifting power kg: ca 2000,

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Software: 1, Barcode: 800, Min.-max. working length in mm: 6, Min.-max. workpiece thickness in mm: 4, Variable support centre-to-centre distance mm: no, Drilling support horizontal: 25, Drill gearings: yes, Drilling supprt from bottom: 1,2, Drill gearings: 60, Drill gearings: yes, Drilling beam swivel-mounted: yes, Belt infeed: yes, Lochraster: 2, Working range max mm: 50, Part performance max/min: 50, Year :1994

Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968

Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987

Manufacturer: unbekannt, Pallet high-bay store: yes, 1stheight mm depth mm: 3200/1050/8 Stück, 2ndheight mm depth mm: 2800/1050/45 Stück<CRLF>3600/1050/4 Stück<CRLF>, 1.Transverse beam Qty.: 93 ohne Haken<CRLF>122 mit Haken, 1.Transverse beam length mm: 2700, Compartment load in kg: 2000, Span length mm: 2700, FREE TEXT: Stückpreis Aufrechtes Rahmenteil 40 Euro/Querriegel 17,50 Euro zzgl Mwst.,

: Josting, : QD1, : 1981, : yes, : 800, : 45, : yes, : yes, : 1200 x 800 x 1600, : 500, : yes,

Manufacturer: Josting , Type: QFS 800, Year: ca.90, Program: yes, Pressbalkenöffung mm: 800, Handverstellbarer Laser: yes, Schnittbreite min-max mm: yes, Working hight mm: yes, Alignment light: 5000 X 1200 X1600, Digital readout lineal guide: 2000, Randverstärkung Leimpfaden: mit Automascher Längenerkennung über Luminizenkamera/über Kreidestriche, Year :ca.90

Capacita di sollevamento massima 3000 kg Altezza massima di sollevamento 5150 mm

Oil-Insulated Power Transformers for Sale - Manufacturer: ELIN - Model: JDR 8000/110 - Power Rating: 8 MVA - High Voltage: - 124.85 kV (Position 9) - 110 kV (Position 0) - 95.15 kV (Position -9) - Low Voltage: 25 kV - Current Rating: - High Voltage: 37.5 A (Position 9), 42.0 A (Position 0), 47.7 A (Position -9) - Low Voltage: 185 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1960 - Status: Out of service since early 2024 - Notable Condition: Low oil inhibitor content and specific resistance; otherwise, oil is in good condition. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Dismantled two-aisled hall supporting structure with the reference no. hbs1789f2 (L 41.5 x W 43.1 x H 10.3 m) as a section of an originally three-aisled industrial hall. In the second life cycle, the section of approx. L 41.5 x W 43.1 x H 10.3 m to be sold could be used for the construction of a sorting hall, production/storage hall, workshop with overhead crane, etc. APPROXIMATE DIMENSIONS: Built GFA: approx. 1789 sqm; Hall length: approx. 41.50 m; Longitudinal grid: approx. 10.24 m MM frame supports; Hall width: approx. 43.11 m AK frame supports; Hall width: approx. 21.1 + 21.1 m MM columns; Clear height: approx. 9.37 m UK Frame - Binder; HALL STRUCTURE: Bolted flat roof frame construction made of hot-rolled and primed/painted steel profiles with frame supports made of IPB / HEB 900 and frame trusses made of IPBl / HEA 900. The roof substructure consists of hot- ...

Load capacity at 500 mm load distance: 2 t Lift mast 2x Lifting height: 2900 mm Fork length: 1600 mm Fork width adjustable by hand: 850 mm 4 wheels, super-elastic tyres Net weight: 3.25 t Overall dimensions without forks: 2350 x 1070 x 2070 mm

dimensions of the machine ca.: 380 x 200 x 134 mm weight of the machine ca.: 24 kg power requirement: - kW baseplate-clamping range: 110 x 70 mm workpiece sizes: max. 56 x 70 x 25 mm profile depth: max. 15 mm angular adjustment: 0-2 ° Condition: unused: Electrik 24 Volt: Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1450 mm turning height: 1200 mm slide adjustment: 800 mm side head - cross travel: 600 mm digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2680 KW, 3350 kVA, 10500 V

NATURAL GAS GENERATOR JENBACHER, TYPE JMS616GS-N.L. -BRAND: JENBACHER -YEAR: 2013 -ELECTRICAL EFFICIENCY: 45%. -ALTERNATOR: STAMFORD 10.500Volt. -FREQUENCY: 50 Hz. -RATING: 3.322 kVa. (2,680 KwE) -SPEED: 1,500 RPM. -FULLY SERVICED BY JENBACHER DEALER. We usually have ready in stock of used gas Gen-set brands (Cummins, Perkins, Caterpillar, Waukesha, Deutz MWM, MTU, Jenbacher), etc... 800Kwe current range up to 3.000 Kwe, as a research most welcome to contact US.

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 116 x 40 mm Truss Type: GNA116x40|SEG5 Agraffe: 5 hooks Clear width: 2,707 mm max. load per pair of trusses 2,400 kg, with the same. distributed load. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,000 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Key data: 1415 KW, 400 V

2 x Jenbacher 420 GS-B121 Containerised Landfill Generator Sets with Exchange Blocks for sale. The container sets are originally from 2010 and 2012. They had exchange block replacements in 2023. Please note: Engine has oversize liner, oversize conrod bearing and oversize main bearing. Scope of supply: Complete Containerised Genset, Engine, Alternator, Base frame, Gas Line, Control Panel (DIA.NE XT4), Radiator, Exhaust. Pictures are for representational purposes only. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Key data: 1200 V, 400

Jenbacher J416 Complete Containerised Trigeneration Plant Fuel: Natural gas Year: 2020 (commissioning Jan 2022). Scope of supply: Complete trigenerator with Engine, Alternator, Gas ramp, Control panel Diane XT 4, Radiator, Gas heat exchanger, chimney, Lithium bromide absorber, 2 x chillers, cooling towers, 13m x 3m x 2.8m container. Switchgear not present . Also available in a cogeneration-only setup for €235,000. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

grinding length: 500 mm grinding width: 200 mm workpiece height: 290 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acce ...

JKV Hermes JKV100 chocolate tempering machine Serial: 15070597 2015, Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3Ph

Key data: 1200 V, 400

Jenbacher J416 Complete Containerised Generator Set Fuel: Natural gas Year: 2020 (commissioning Jan 2022). Scope of supply: Engine, Alternator, Gas ramp, Control panel Diane XT 4, Radiator, Gas heat exchanger, chimney, 13m x 3m x 2.8m container. Switchgear not present. Also available as a trigeneration system for €350,000 . Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

grinding length: 600 mm grinding width: 200 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Esnova (Jung Heinrich) Type: suitable for Esmena The scope of delivery includes: Pallet rack crossbars, used Material colour: orange Box profile: 120 x 50 mm Truss type: EGN-DUO 120x50x1.5/65 Agraffe: 5 HK (hooks) Clear width: approx. 2,710 mm Max. load per pair of trusses 3,200 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Key data: 253 KW

Used Jenbacher 208 gas engine, GenSet BJ 1993; no documentation or operating hours available; Jenbacher maintenance contract; since motor was not covered when uninstalled - it looks like that; Price on request, ATTENTION Location 6135 AUSTRIA

- With one labelling station for applying self-adhesive labels - Year of construction: 2002 - Last service: June 2023 - Output: 1700 b/h - Formats: Ø 60/110mm - Direction of rotation: left-right - With variable speed drive - With photo cell at machine exit - With motorised conveyor - Without rotary infeed table - With small rectangular accumulation table - With inkjet printer SOJET for batch number – Year 2022 - In good condition

Size: 980 x 600 mm Equipments: Investment table with tabulator 98 x 60 cm 4 head paper drills Speed regulation

Size: Equipments: 4 head paper drills

Size: 1850 mm Equipments: Working width min/max 215 mm / 1850 mm Working width after gluing min / max 140 mm / 1000 mm Insertion min / max 150 mm / 1200 mm 3 point / 4 point / special binding F/E/EE/EB/BE corrugated / solid cardboard Straight line glue folding bottom Motorized format setting

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2960; Gross weight [kg]: 2960; Engine: 4045HP551-SV; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 1100