j o r used for sale

; Gross weight [kg]: 440; Rear tyres remaining: 100; Front tyres remaining: 100; Lift height[mm]: 350

Roll-out machine Kombi WLS Jewel Model: 16 CW for all doughs for rolling out and touring Infinitely variable roller adjustment Pull-out table left and right Active pressure plate with manual adjustment with long roller / long knitter below with tow for wrapped products Dough roll-out machine can be driven with locking device With flour container Connection 400V, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center.

Brand: MARELLI GENERATORS, Condition: NEW, Generator KVA: 3550 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 5124 , , https://www.hamofa.com/stock/generators/marelli-generators-mjb630-la4b 24-3550kva-new/151, , = More information =, , Type number: MJB630 LA4B24 LOSSE GEN 3550KVA

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

FOR SALE – 2 x Jenbacher J320 GS B05 We offer two Jenbacher J320 gas engine units in excellent working condition: Power Output: 1,064 kW each Fuel Type: Natural Gas Speed: 1,500 RPM – 50 Hz Control System: DIANE XT4 Voltage: 400 V Alternator: STAMFORD Running Hours: approx. 53,000 hours each Maintenance: All maintenance performed by official Jenbacher service Available for immediate sale. Site visits available, including endoscopic inspection. More pictures and detailed technical information can be provided upon request. For further details or to schedule a visit, please contact: Cogeneración Técnica Energética ctenergetica.com +34 674945249

Film Processor G&J ML860

We offer in the context of an insolvency liquidation: 2 x CNC lathe ( 1 x sub-spindle ( 1 x lower turret ), used + Bar feeder + Accessories 1 . CNC lathe with sub-spindle Make : MIYANO Type : BNC 34-S Year of construction : 1989 Control : Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chuck - 1 x 3 - Cheek chuck 2. CNC lathe with 2 x turret Make : MIYANO Type : JNC 45-T Year of construction : 1989 Control : Fanuc 0-T Bar Feeder HYDROBAR - 1 x collet chuck - 1 x 3 - Cheek chuck 3. Accessories - Approx. 65 x collet - Approx. 40 x Baking Sets - Various tool holders + tools -Documentation The machines are untested, but they were in use until the end. Sales are made ex site, loading can take place at an additional cost.

Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX610 Profile Dimensions: 76.2 x 63.2 x 1.8 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,250 mm Depth: 1,050 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Mini Excavator JCB-8008 Year 2022 std. 770 Top condition 13.6500 € Technical data: Manufacturer: JCB Model No.: 8008 Year of Make: 2022 Hours: 770 3-cylinder Perkins diesel engine 0.762 l displacement 9.5 kW (12.7 hp) max. motor power 950 KG Weight Constant Pump Hydraulics with Two Gear Pumps Hammer hydraulics incl. piping on the boom Swivel boom Swivel lock Acoustic warning devices Dozer blade Hydraulically adjustable undercarriage: 700 mm to 865 mm Equipment: TOPS protection bar, front-mounted, foldable 180 mm wide rubber tracks Plastic seat with high backrest German version Dipper stick: 887 mm Grease Chain Tensioner Work lights on the boom 1 backhoe bucket 300 mm 1 digging bucket 750 mm Sold under exclusion of any warranty. Prior sale

32 ignition coils and 16 spark plugs from Jenbacher J316 for sale The price for coils and spark plugs is 20 € each.

Air filter from Jenbacher J316 for sale

Technical data for the top-up tabs: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Aufstocktabschen, used Total length: approx. 400 mm Total width: approx. 129 mm Internal width: approx. 121 mm f. Frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 100 mm Hole grid i. d. width x height: approx. 85 x 100 mm BoreholeØ: approx. 10 mm Material color: blue Weight / pcs.: approx. 2,59 kg Hint: No screw material included.

Falch Trailjet 15 Pressure Washer 500bar , 95 °C Mint condition - Manufacturer: Falch - Type: Trail Jet 15 - Registration date 07/21 - Working pressure: 500bar - Volume flow: 15 l/min - Cold and hot water up to 95 °C - Operating hours: approx. 481 h - German papers Accessories: - Optional Price excluding VAT! Net price: 32.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in. CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more.

Jungheinrich scissor lift truck, load capacity up to 1000 kg

; Gross weight [kg]: 1250; Engine: JCB 448 TWGA; Accessories: Control Panel, Control cabinet including DSE panel and start-stop (shipped loose), Remote start ready, 12V starting motor and alternator, Double and switchable fuel filter, Pre-filter (shipped loose), Double walled fuel lines with leakage detection, Oil d

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Forklift front forklift in very good condition Manufacturer Jungheinrich Year of construction 2011 Payload 3.000kg Operating hours approx. 4,200 hours Triplex mast with full free lift Lifting height approx. 5m Three valves up to the mast Side shifters Own weight approx. 4,73to Height approx. 2250mm Total width approx. 1.300mm Turning radius approx. 2.37mm All information to the best of our knowledge, but without guarantee!

NAN-JHIEH NJ-900QE polystyrene pre-expander was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is used in the pre-foaming of polystyrene, which is the first stage in the production of styrofoam boards. The raw material in the form of granules is subjected to high-temperature steam, which causes it to increase in volume several times. The result is expanded polystyrene EPS in a spherical form with a number of valuable properties, such as insulation, durability and flexibility of use. The NJ-900QE EPS pre-expander weighs 2800 kg. The machine on offer is part of a larger EPS production line. It is also possible to purchase the entire technological line, consisting of the following components: – NAN-JHIEH polystyrene pre-expander – EPS granulate feeding system – styrofoam forming machine (5 units) – injection moulding machine – robot for injection mou ...

Beautiful hand system crucible monopole. Crucible area 35x 48 cm . Rollers are New

Boyens Jelly compact glaze sprayer Serial: 1500112073 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Boyens Jelly compact glaze sprayer Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Boyens Jelly compact glaze sprayer Serial: 1500718186 2018, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

10BBL Brewery Complete Brewery Consisting of : 10 Brl Brewhouse (Hot Liquor Tank, Mash Tun with Underback and Kettle/Copper) built and installed by Johnson Brewery Designs in 2011. The brew house is powered by immersion heaters and requires a 3 ph (415v) electricity supply. The Majority of brewery pipework is hard piped and integrated with Brewhouse pumps, includes in-line hop seed filter, 10 Brl per hour Heat Exchanger (previously operating on 11ºC well water) and able to chill wort down to 18ºC The Wort kettle is set up to use whole hops Grist Case. 350 kg capacity with 8m x 4” auger tube ( 2 tonne per hour) feeding to grist hydrator. Typical mashing in time 12min to 14min HWT: Gross Capacity 2,500, Temperature controlled with recirculation pump. 2 x 12 kW Immersion elements. Top manway access for additions. Overflow Pipe. Mash Tun: Maximum Grist capacity 500 kg. ...

weight max. in kg: 2000 kg tool adaptor: Kugelkopf stroke height: 200 mm battery: 24 V / 240 Ah weight: Batterie: 204 kg weight of the machine ca.: 320 + 204 Kg dimensions of the machine ca.: 1,1 x 1,2 x 1,4 m • Electric lift truck for roller carrier, • Battery, • Manufacturer HAWKER, type Perfect Plus, no. 5225080001, • Year of construction 2009, • Charger, • last UVV -check 01/2009 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FERMENTATIONSMASCHINE. - GEBRAUCHTE FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE DIMENSIONEN:: H: 166 CM DURCHMESSER: 105 CM

Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.

Pretzel leaching device, Jufeba, type TA 78

The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stand ) Manufacturer: Jung Heinrich Type: Esmena Material color: sendz. galvanized for shelf spacing: approx. 250 mm L – Profile: 85 x 40 mm Weight: 0,68 kg | Pcs.

The compact JELLY is suitable for use on a table or on a mobile base, depending on your needs. Almost any type of gel can be used to work with this device. Operation is very simple and the gun trigger is operated without force. Technical data: Design: stainless steel working parts and body, Power supply: electric 220/240V, 1500 W, Control: manual, Operation type: spraying (gun - spray), Capacity: constant - at gel temp. of approx. 90 degrees C, 400cm3/min, Dimensions: 377 x 510 x 430 mm (length x width x height), Accessories: electrically heated flexible hose, length 1.8m; dispensing gun and gun handle.

Fat baking device, Fabr. Jufeba, 36 Berliners, turning device

James Burn JBI DocuPunch Plus Automatic punching machine for calendar sheet punching. With the DocuPunch you can easily and quickly punch small or large runs of calendar pages and book pages. By Interchangeable tools optionally with round or square holes, with or without thumb hole. Easy to use, like a copier! Description: Punching system for calendar sheet punching (tool not available) Compact, on castors, space-saving Adjustable speed Operation via touch screen Quick job change in about 5 minutes Automatic feeding of sheets from high pile feeder Quick tool change in approx. 2 minutes Foldable punches Simple and intuitive format setting Waste containers for stamping waste Standing sheet delivery Technical data: Max. sheet format: 330 mm (binding side) x 300 mm Min. sheet format: 138 mm (binding side) x 1 ...

Schmalz Vacuum Tube Lifter JumboErgo 140-90° with Column Slewing Crane Technical data: • Vacuum tube lifter JumboErgo 140-90° (load capacity 120 kg) with column slewing crane for handling wooden panels: o Room height => 5,000 mm o Lower edge of crane boom = 3,500 mm o Crane height = 4,270 mm • JumboErgo design: 90° swivel • Double suction cup with sliding suction cups for swivel unit • Column slewing crane for Jumbo tube lifter Available from: immediately Terms of delivery: ex site – EXW Potsdam Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

3x Narrow aisle forklift / high-lift order picker, Jungheinrich, EKX 515k / EKX 516k, lifting height 9.78m, 1.45 to 1.6 to load capacity – used - : Price per piece, ex site, dismantled, packed and loaded (net): Forklift 1: only 8.500.-€ (without charger) Forklift 2: only 14.500.-€ (without charger) Forklift 3: only 13.500.-€ (without charger) Price for all 3 forklifts together (incl. 1 charger): only 29.500.-€ Manufacturer: Jungheinrich Stacker 1: Type: EKX 515k Year of Make: 2015 Serial number: e.g. FN497998 Operating hours: No.13400522: 28.460h Nominal load capacity: 1,450kg Battery Voltage: 80V Leeward weight (without battery): 7.204kg Option: G+I 120 800ZT Load center of gravity: 620mm Drive power: 7.6kW Battery Weight: 1480/1636kg Lifting height: max. 9,780mm Stacker 2: Type: EKX 516k Serial Number: FN559312 Year of manufa ...

EN VENTA/ALQUILER – GENERADOR DE GAS / BIOGÁS JENBACHER J312 (13 HORAS) Generador Jenbacher J312 disponible, adecuado para aplicaciones de gas natural o biogás. Una excelente oportunidad para proyectos energéticos: la unidad proviene de un proyecto nunca comisionado. Especificaciones principales: Modelo: Jenbacher J312 Año de fabricación: 1997 Potencia nominal original: 422 kW Potencia estimada actual: entre 501 y 635 kW Velocidad: 1500 rpm Marca del alternador: STAMFORD Voltaje del alternador: 400 V Horas de emisión: solo 13 horas Condición: sin usar, de un proyecto cancelado Tipo de combustible: gas natural o biogás Contenedor disponible bajo solicitud, adaptado a los requisitos del cliente Inspección in situ disponible con cita previa. La unidad está en excelente estado, lista para un despliegue rápido. Contacto: +34 674 945  ...

Engine Make JENBACHER Engine Type JMS 616 GS-N LC Power KW 2433 RPM 1500 Fuel GAS Generator Model AVK Generator Power 3760 kVa Volts 10500 Hz 50 Year of Manufacturing 2008 Running Hours 48312 GAS POWER HOLLAND 00316 38 63 90 71 FULL MAINTENANCE HISTORY AVAILABLE

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000 GAS POWER HOLLAND 00316 38 63 90 71

ALKO ECO-JET 35/3N Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A) Fire protection: sprinkler installation with powder fire extinguisher

Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350