its used for sale

BBA BV-150 dry self-priming pump, This BV series pump is designed with an emphasis on reliability and durability. Thanks to its fully mechanical vacuum system, these pumps prime quickly, even without liquid in the pump housing. Due to its heavy construction, this pump from the BV series is ideal for use in vertical and horizontal drilling techniques., World-class performance this pump from the BV series is used for the most demanding bentonite and sludge applications. A robust overall design ensures maximum performance of this pump., This pump is equipped with a soft starter. This motor control, ensures a smooth start with constant acceleration, lowers, the inrush current and prevents unnecessary mechanical stress, on the pump. Another advantage is linear stopping with this, prevent pump damage due to water hammer, , Pump Specifications:, Type...BV150 D285, Max. capacity.430 m3, /oclock, ...

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

We sell here the Robot Coupe Blixer 45 A, 45 L, as can be seen in the pictures, with the accessories shown. This device gives you two features in one! : The Blixer combines the features of two well-known devices in one - that of a cutter and that of an emulsifier-mixer device. It makes it possible to mix all kinds of raw and cooked foods into liquid, semi-liquid or pulpy end products Efficient: Thanks to its large liquid capacity and its lid with wiper and sealing ring, this appliance allows you to prepare all kinds of mixed food and even tube feeding. Reliable: Knife with patented new blade profile for optimal cutting quality. Regular cutting and guarantees perfectly uniform processing even with the smallest quantities. This device is equipped with 2 blades as standard, but can be optionally extended to three blades. The third blade can be ordered for an extra charge. Due to th ...

We offer the Ghibli G90 Commercial Roaster from COFFEE-TECH Engineering for sale. The machine was put into operation in January 2022 and is in absolutely mint condition, as it has been little used (total mileage: approx. 13 tons). Due to internal restructuring, the roaster is now for sale. The Ghibli G90 roaster is an outstanding machine, especially due to its intuitive operation via the touch panel as well as its unique energy efficiency, which is state-of-the-art. All gates are pneumatically controlled and allow you to automatically follow your own roasting profiles if necessary. The extremely compact overall design allows easy handling. The latest update includes even more precise control via the touchpad. The machine is fully equipped, including afterburner and destoner, and can be viewed during operation. For more information, please visit the manufacturer's website. The ma ...

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

For sale: Plastic container sealer HL-95A (187x137, gas filling), fully operational. ‼️Has a touch screen as shown in the video ️We will give away a gas cylinder and all its accessories as a gift Sale due to closure of production The cylinder and all its accessories are AS A GIFT

Used industrial robot including control system in very good condition, Ready for immediate use Suitable for welding/spot welding, machine operation, material handling and much more. Payload: 120 kg Reach: 2413 mm Axles: 6 With its six axles, the Fanuc S-420F is capable of precisely moving heavy payloads of up to 120 kg. Due to the wide range of possible applications, there are practically no limits to the Fanuc S-420F. It offers consistent cycle times and handles heavy lifting, spot welding, and pick & place effortlessly. Absolutely professional machine from the market leader for automation FANUC - yet easy to use / program. Despite its large working area, the robot requires a comparatively compact footprint. The Fanuc S-420F RJ2 is designed for ground mounting and weighs a whopping 1600 kg. Movement Speeds: J1 90 °/s (1.57 rad/s) J2 90 °/s (1.57 rad/s) J3 90 ...

For sale is an AvK DIG 140 i/4 generator, which bears the serial number 84 27519 A101. This model was originally paired with a Jenbacher 620 engine with the design number B227. The generator is characterized by its high power of 3400 kVA, which is generated at an output voltage of 10,000 V and a frequency of 50 Hz. This model was manufactured in 2005 and has clocked up 75,000 hours since then. An important aspect to keep in mind is that this generator has been completely overhauled, including Unitrol. This ensures that it is still in optimal condition despite its intensive use. The price of this generator is 29,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us

Gweike LF-4020GAR Profile and pipe laser cutting machine Machine is in excellent condition 4000x2000 cutting table 6000 mm profile&pipe laser cutting It is a combined machine It has its own nesting software for profile cutting All maintenance is done by its own authorized service

Colored Steel Roll Forming Machine is mainly used in the production of colored steel sheets. The machine is artistically made and transmits smoothly at a low noise. It is a kind of very welcomed modern building material with better anti-press and anti-bending performance, and is widely used in the building of garden like factories, civil-construction and mansions, etc. Its length is set according to customer’s requirements and transportation situation. Its color is selected from the color code of the steel factory.

ID3225 Cutter suction dredger Scope of application: sandy gravel, sand and silt for dredging. Thanks to its strong cutting head, it is also able to dredge soil interwoven with root system Length: 24 m, width:7 m, Depth: max.: 1,3 m, Displacement: 153.5 tons Slurry transport distance max.: 1000-1500 m For this, the appropriate pipe length is available. Pipe diameter: 300 mm or 400 mm Pump pressure height max.: 80 m Maximum dredging depth: 12 m Power: depending on the material: 150-450 cbm/hour dry material Cutter Head Suction Dredger Application: Dredging of sandy gravel, sand and silt. Thanks to its strong cutting head, it is also able to dredge soil interspersed with roots. Length: 24 m, Width: 7 m, Depth: max.: 1.3 m, Displacement: 153.5 tons Material transport distance max.: 1000-1500 m The appropriate pipe length is available for this purpose. Tube diameter: 300 mm o ...

The Cannon PF 171506 sheet thermoforming machine is a 2005 machine that uses twin-sheet technology to produce plastic objects with high productivity and molding precision. The working field of the machine is 1650 x 1500 xh 600 mm, which makes it ideal for producing large objects. The machine is equipped with two ovens, one lower and one upper, which allow to heat the plastic plates and to shape them according to the desired shapes. Furthermore, the thermoforming machine is equipped with two automatic loaders, which simplify and speed up the raw material feeding process. The Cannon PF 171506 thermoforming machine is also equipped with 5 fans for cooling the molding, which guarantee perfect solidification of the plastic material and therefore greater molding precision. The overall footprint of the machine is 13 meters long by 5 meters wide, which requires adequate space for instal ...

For sale 3 pieces of used BECKER vacuum pumps model VTLF 2.250, they are vane, oil-free, rotary pumps, which affects their durability. The VTLF series are highly durable pumps with low operating and maintenance costs. These pumps feature long life graphite vanes and integrated air filters. Two vacuum pumps from 2018, no.: A3252574, A3252569, are used very little (perfect condition) and the third pump from 2014, no.: 2794370, has had its graphite blades replaced, so its operation does not raise any objections and does not show any vacuum losses. Detailed data in accordance with the photographs of the nameplates.

Turbo system D150P filler Turbo Systems Ltd Mobile Depositor, Type: D150P, Machine Number: D150P5607543, Year Built: 2006, Dimensions: 2100mm x 600mm x 1550mm. This is a filling pump with its deposit and its nozzle..

Our KoMoMix+ is a beautiful high-performance blender that also shines from the inside due to its extremely high-quality components. In addition, it is produced fairly and environmentally friendly in Austria, not in low-wage factories from the Far East. There has (probably) never been like this before! The KoMoMix+ is available in 6 trendy colours. Black we have in stock ready for shipment Do kitchen appliances always have to look boring and be made of plastic and metal? No! We have taken a radically different approach and designed a beautiful high-performance blender with the KoMoMix+, which brings in some revolutionary features, e.g. a housing made of solid beech wood instead of plastic. Or the removable cork handle. We have carefully selected every single part of the KoMoMix+, developing every little detail for years ? until we were 100% satisfied. We didn't just want to build the next ...

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

This advanced packaging machine is designed to efficiently and precisely fill plastic or glass jars with bulk products. Made in the USA, this machine automates the entire packaging process, including jar retrieval, product dosing, membrane sealing, and cap tightening. With a production capacity of approximately 1500-2000 jars per hour, it is ideal for high-volume production. Heres a detailed overview of its functions: 1. Jar Retrieval: The machine features an automated system for handling both plastic and glass jars. Jars are picked from the supply and positioned for the filling process. 2. Product Dosing: Equipped with a highly accurate dosing system, this machine ensures precise filling of the jars with bulk products such as spices, coffee, tea, grains, or sugar. The dosing system can be adjusted to meet specific product weight or volume requirements. 3. Membrane Sealing: A ...

Used TecnoBox carton machine model TX-1. New 2009. Tecnobox machines offer solutions for assembling and gluing corrugated cardboard boxes, handling most formats available on the market (including P84, Column, Plaform, C1). The TX series, thanks to its design and composition, is undoubtedly one of the strongest and most robust machines on the market. With no major maintenance work required thanks to standardised and wear-resistant components, specially positioned for easy access, it is possible to replace them even without much mechanical knowledge. All these components are ISO-certified and can be easily found in the widest variety of parts shops. Designed to meet the requirements of mobility, thanks to its robustness and transport attachment elements, it makes installing the machine at a specific location simple and easy.

STAR SB-20R type G CNC turning centre was manufactured in 2014 in Japan. The machine is distinguished from other machines of its type by its compact size and a range of features that allow it to perform virtually any type of machining on workpieces with a maximum diameter of 20 mm. The maximally durable and rigid design additionally ensures the incredible stability and rigidity of the process, required to achieve excellent turning precision and quality. Inside the large working area there are two spindles (main spindle and sub-spindle) with C-axis, which are driven by reliable high-power motors. The sub-spindle, in combination with the driven tools, allows completely independent machining after capture. The lathe also features a revolutionary guide sleeve change system, which allows the machine to switch between guide sleeve and no guide sleeve mode. The STAR SB20R type G Swiss-typ ...

DUGARD EAGLE 660 VMC CNC machining centre built in 2007 in Taiwan, is used for precision milling, drilling, threading, boring and reaming of workpieces with rotary tools. The machine, with its extensive machining capabilities, is distinguished by its extremely stable base, which provides rigidity and support for the guideways on which the X,Y,Z axes are guided. To ensure a high level of safety, specially designed sliding guards protect the operator from moving parts, coolant and workpiece fragments. All the processes, from tool selection to the machining cycle, are performed fully automatically by the milling centre. The implemented SIEMENS SINUMERIK 810 D CNC control minimises the operator’s handling of the machine, while the capacious 24-position magazine selects the shortest possible access path to the tool. This solution increases production efficiency while significantly reduci ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

Roll length: 1100 mm Video is example to showcase how the machine works. The LW120 roller coater is an easy-to-clean compact machine and is often used as a Glue applicator orr Oil application machinefor one or two-sided application. The LW120 is used for roller application of liquid media such as glues, oils, glazes, primers, synthetic resins and adhesivesnbsp;on flat substrates such as wood, cardboard, PS and XPS rigid foam boards, metal parts, brake linings, cork floors, insulation boards,nbsp;. . . As an easy-to-clean compact machine that can be quickly dismantled, the LW120 roller coater is a convincing, universally applicable unit for coating a wide variety of application media. It impresses above all with its simple handling, durable and robust construction, as well as its efficient application of liquid and paste-like coating media. The LW120 roller coater from Axel Wirth Maschi ...

This SODICK VL 400Q Erosion machine was manufactured in 2017 in Hungary. It has a movement range of X400mm, Y300mm, Z220mm. Its tank Size is 860mm x 690mm and its control type is LN2W SODICK. Contact us anytime for further information.

This Mitsubishi Electric FA20-VS Erosion Machine from 2006 is a compact machine, operated through a Mitsubishi 64-BIT-CNC Control unit. Aside from its solid condition, the equipment stands out for its 1500-kilogram workpiece weight capacity.

SENTE MAKINA PLSS 3X1.5 plasma cutting machine was built in 2015 in Turkey. Distinguished by its ease of use, stable construction and large working area, the machine is used in even the most intensive machining of stainless, galvanised and aluminium sheets. The control panel designed for operating the plasma cutting machine has a specialist CNC controller with the ability of importing programmes in DXF format, which optimises the machining process and ensures economical cutting regardless of the machined material. During its operation, the machine underwent regular servicing and upgrades, during which, among others, the grate was replaced. The SENTE MAKINA plasma cutting machine weighs 980 kg. Technical data of the SENTE MAKINA PLSS 3X1.5 CNC cutting machine - CNC control: SENTE MAKINA - work table dimensions (L x W): 3000 x 1500 mm - grate work area (L x W): 3170 x 1500 mm - plas ...

Generator: MGH5 max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero

Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGF2 Max. Travel range: X 450mm, Y350mm, Z 350mm, C yes Clamping of tool: Erowa System ITS Clamping of parts: Erowa Sysem UPC Electrode / parts changer: Erowa UPC 10 position, ITS 72-90 position Cooling device, fire extuiguishing

Red transport crates are hereby offered for sale. These are made of plastic and have the following dimensions: ( LxWxH ) 60 x 40 x30cm If necessary, the boxes are also available several times. Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No.  ...

Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero

Generator: MGH max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erow

Generator: MGH5 max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er

Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero

WEBER SKINNER mod ASE453 ref: 1880 WEBER brand meat skinning machine, model ASE453, is for sale. Constructed of stainless steel in its entirety. Used equipment completely overhauled, with warranty and in perfect condition. Features: cutting width 450 mm, external dimensions of the machine 700 mm width x 610 mm depth x 990 mm height, average speed 30m/min, air pressure 6bar/10bar, weight 130kg, voltage 380v. Meat thinner, derinder, meat peeler. Its condition is excellent re-release. Virtually new overhauled and guaranteed equipment. OCCASION. NEGOTIABLE PRICE.

DECKEL MAHO DMC 50 V CNC machining center was built in Germany in 1995. The machine distinguished by its robust, stable construction is used in precision face and hole machining using rotary tools. The machine is ideal for use in any production facility thanks to its reliable components, such as the high-performance FRANZ KESSLER DMS100.AL.4.FOM spindle and the 20-position tool magazine with automatic tool changing, which guarantee perfect milling precision and accuracy. The DECKEL MAHO CNC vertical machining center weighs 7000 kg. Technical specifications of the DECKEL MAHO DMC 50 V CNC milling machine - work table dimensions (L x W): 700 x 400 mm - feed rates in the X/Y/Z axis: 500/420/500 mm - speed of feeds in the X/Y/Z axis: 1-2000 mm/min - feed motor power in the X/Y/Z axis: 3.5 kW - maximum workpiece weight: 800 kg - maximum spindle rotational speed: 15000 rpm - maximum  ...

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

Used Cap Unscrewer Zalkin MS 24 858 This cap unscrewing machine is branded Zalkin and was built in 2013 The machine unscrews caps at a speed of 25 000 bottles per hour thanks also to its 24 heads which allow it to reach high speeds Currently the machine is stored indoors therefore protected Included are all manuals available with instructions for using the machine Despite the years it has always been well kept with its due ordinary maintenance It is therefore ready for immediate sale with the documents included [...for more information send your inquiry to the seller.] refno: SV02

CANS TINS Filler 8 1 New for sale This filling machine is equipped with new Proportional Flow Regulator PFR technology and is using Japanese step motors Maximum microbiological safety by contactless filling The filling accuracy is always guaranteed through every individual load cell and with every single bottle in every cycle With the help of the latest technology actuators with step motors every individual valve has its own proportional valve The target filling value is always matched correctly The Proportional Flow Regulator technology is able to adjust the flow of the product proportionally The machine utilizes Japanese step motors and actuators It does not consume air and so it does not have any air collectors This reduces the costs of the compressor power consumption and maintenance Every nozzle has its own load cell at the bottom of the bottle base platforms The electronic pre expu ...

Used Injection Molding Machine Husky AE230 Year 2015 Injection Molding Machine The Husky AE230 manufactured in 2015 stands as a pinnacle of precision and reliability in the realm of preform molding machinery Crafted by Husky a recognized industry leader it boasts an array of technical features that position it as the premier choice for businesses in the bottling sector Remarkable Production Speed of the Used Injection molding machine Husky One of its standout features is the remarkable production speed clocking in at an impressive 18 000 preforms per hour BPH This rapid pace guarantees an uninterrupted and dependable production process an indispensable asset for large scale enterprises Efficiency and Safety of the Used Injection molding machine Husky The Husky AE230 is equipped with 48 cavities enabling the simultaneous production of a substantial number of preforms This feature signific ...

Used Labeler Krones Topmatic Krones labeling machine model topmatic from 1992 capable of reaching speeds of 40 000 bph The machine has all its safety protections and also the machine manuals with all the maintenance documents The labeler is currently disassembled and mothballed The rotation direction is counterclockwise and the number of stations is 3 This labeler handles only cylindrical bottles This used labeler is in excellent condition well kept and is sold with some of its spare parts Standard feed type with two exit lanes The direction of movement is from right to left then counterclockwise Labeling machine used for the labeling of champagne bottles Labeling is possible at 3 stations only hot glue Integrated label control with light sensor Various label formats are possible Staniol in the neck area back label Neck loop and label torso [...for more information send your inquiry to t ...

Used Wine Filling Line 2000 Complete line for still wine filling consisting of the following machines Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002 It reaches speeds of 6000 BPH for the 0 75 lt format In addition to that it works formats such as bottles of 0 375 0 75 and 1 50 This used depalletizer is supplied with all its accident prevention protections and also the user manuals The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine Instead there are spare parts available Measurements Length 2950 mm Width 2133 mm Height 2530 mm Weight 1550 kg Volt consumption 380 Kw 2 Hz 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti and it is an Oceanic 16 16 4 model It works with the same formats from 0 375 0 750 1 500 at a speed of 3800 BPH The ...

Used Alfatek Elvira Filling Monoblock 9 9 1 aluminium screw cap 2011 This monoblock can work formats of 250 ml and 1 litre It works with both rectangular and cylindrical bottles It has a vacuum pump and some spare parts The minimum height of the processed bottle is 23 cm while the maximum height is 32 cm Also included are wiring diagram manuals The machinery can be used for both liqueurs oil and still wine Its state of maintenance is excellent it has seen very little use by its previous owner Includes vacuum pump element Shipping can start after about 20 working days from the first payment [...for more information send your inquiry to the seller.] refno: M191

Used TMG DV 04 Divider Inserter 2005 The TMG DV 04 Divider Inserter is a highly efficient and reliable machine that was manufactured by TMG in 2005 It is designed to handle a variety of containers including glass and PET and has a speed of 35 cases per hour This makes it an excellent choice for businesses that need to process large volumes of products quickly and accurately In addition to its impressive processing capabilities the TMG Divider Inserter also comes equipped with a range of safety features This to ensure that it can be used safely and efficiently in any production environment These features combined with the availability of comprehensive manuals make this machine easy to use and maintain even for operators with limited experience Currently the TMG Divider Inserter is in production meaning that it is actively being used to process and package products for businesses around th ...

Used Robot Palletizer Fanuc 2003 The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations Look no further than the 2003 Fanuc Robot Palletizer model M 410 iB 160 Equipped with a pick up head for cardboard and available base this palletizer is designed specifically for palletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can develop pallets up to a height of almost 3 meters The integrated base and controller in the pedestal or the available non pedestal version saves floor space an ...

Used Robot Depalletizer Fanuc 2003 The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations Look no further than the 2003 Fanuc Robot Depalletizer model M 410 iB 160 Equipped with a pick up head for cardboard and an available base this depalletizer is designed specifically for depalletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can depalletize products up to a height of almost 2 7 meters The integrated base and controller in the pedestal or the available non pedestal versio ...

Used Filling Monoblock for Beer Comac 2014 For those in the market for a used filling monoblock for beer consider this Comac 6 6 1 model from 2014 This machine is capable of producing up to 700 bottles per hour and is designed specifically for glass containers The available formats for this machine are 0 33 L and 0 50 L and it is meant for filling beer The rinser on this machine features six grippers and a single treatment cycle which helps to efficiently clean and prepare the bottles for filling The filler has six valves and operates using an isobaric fill type which means that the pressure in the bottle is equal to the pressure in the filling tank This ensures that the beer is filled evenly and at the correct pressure The filler also features a fixed type of nozzle and a traditional isobaric valve The capper on this machine is designed specifically for crown caps and features one head  ...