its used for sale

Our range also includes the SMG73 polishing grinding machine, which provides a powerful solution for grinding and polishing various materials such as wood, metal and plastics. The machine has a size of 1.75 m length, 0.75 m width and 0.73 m height and a 5.5 hp engine with a power supply of 380 volts. The spindle speed can be adjusted in three stages of 1400, 1700 and 2200 rpm. Thanks to its robust design and high-quality workmanship, the SMG73 is a durable and reliable investment for anyone who needs a powerful grinding and polishing machine. We offer fast delivery directly to your home so you can start working quickly and easily. Contact us today for more information or to place your order. ---------------------------------------------------------------------- ---------------------- Our range also includes the SMG73 polishing and grinding machine, which provides a powerful solu ...

SCHLOTTER Galvanotechnik galvanising line, manufactured in 1994 in Austria, is designed for professional electrochemical treatment on various types of workpieces. During the treatment, a special coating is produced which protects the workpieces from mechanical damage and corrosion. The SCHLOETTER Galvanotechnik galvanising line, characterised by its high reliability and low operating costs, is equipped with a modern control system, which makes it possible to control the ventilation system and to adjust parameters such as process time in the galvanising baths and heater on/off times. The galvanising and phosphating line is fully complete and ready for operation. Equipment of the SCHLOTTER Galvanotechnik automatic galvanising plant - tumbler trolleys (6 sets) - trolleys for suspension system (5 sets) - centrifuges (2 pcs.) - rectifiers (3 pcs.) - workpiece dryer - ventilation s ...

PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressing ...

The Aerzen blower unit, which was manufactured in 1986, is a reliable and powerful solution for various applications. With an operating pressure of 1.05 bar, it provides the necessary compressed air for industrial processes, ventilation systems or other applications. The blower unit has been carefully manufactured and is characterized by its durable construction and efficient performance. It is designed to generate high airflows while maintaining stable operating pressure. We would like to assure you that we can offer you the best possible price for this blower unit. The price is negotiable, so we can respond flexibly to your requirements. If you would like more details about the blower unit or have any questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. Contact us today to learn more about this Aerzen blower  ...

Description of the Berko compressor model BFA108 (serial number: 080016590), manufactured in 2009: The Berko compressor model BFA108 is a powerful solution for various applications. With its robust design and reliable performance, this compressor provides an efficient compressed air supply for industrial processes, construction sites or other applications. The compressor has been carefully manufactured and is in good condition. Further information on technical details and features can be found in the attached images. All relevant information about the accessories and functions of the compressor is also displayed there. We would like to assure you that we can make the price of this Berko compressor negotiable. If you are interested or have any further questions about the device, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries p ...

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

Hello I will sell a powerful chipper of the American brand Rotochopper model MC-166 Engine from a reputable company CAT 3406 - 360 HP. The chipper, despite its age and appearance, is fully functional. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. The same applies to the operation, which is highly intuitive. Drum-knife chipper for very diverse needs: - Wood, whole logs. - Various types of wood waste - tree trunks, stumps -Cuts - Pallets (It has a magnetic roller that captures metal) - blocks, waste - and many others Capacity approx. 90 m3/h depending on material, operator efficiency, type of material and screens. It has a mounted magnetic wheel that will allow you to get rid of metal parts from the material. It is possible to install different sizes of sieves depending on the needs. The wide hopper ...

SYNGOOD SG1218 laser was manufactured in 2015 in China. The machine has worked on the production of polygraphic die-cuts, and its versatility also allows cutting and engraving in materials made of among others sheet metal, wood, plywood and plexi. The elements are processed with a high-performance CO₂ laser with a power of 400 W, on a work table with a length of 1200 mm and a width of 800 mm. The laser is compatible with the most popular graphics programs such as CORELDRAW or PHOTOSHOP and also supports the most important graphics formats such as DXF and BMP. The machine is equipped with LASERCUT software, an optical system U.S.A. Lens II IV and a CW6000 chiller. The biggest advantage of the laser is its low number of working hours – the laser was used for only 10 hours. The total weight of the device is 1300 kg. Technical data of the SYNGOOD SG1218 laser engraving machine - l ...

Dobot collaborative robot Cobot CR12 - new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With multiple I/O ...

Dobot collaborative robot Cobot CR12 with SafeSkin- new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With ...

Dobot collaborative robot Cobot CR7 - new Collaborative robot series Payload 7kg Reach: 800mm Axes 6 The CR7 robotic arm is an automation solution designed for industrial and educational purposes. DOBOT's CR7 series can be adapted to various applications and is easy to use and quick to perform. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also becau ...

Dobot collaborative robot Cobot CR7 with SafeSkin - new Collaborative robot series Payload 7kg Reach: 800mm Axes 6 The CR7 robotic arm is an automation solution designed for industrial and educational purposes. DOBOT's CR7 series can be adapted to various applications and is easy to use and quick to perform. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools,  ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter  ...

3B161 shaft grinding machine built in the USSR, performs machining of rotating surfaces with high precision and quality along the entire length of the grinded workpiece. Distinguished for its exceptional reliability, the machine uses a large grinding wheel with a diameter of 500 mm, which is driven by a reliable 5.5 kW spindle. The XC3 3B161 grinding machine, thanks to its combination of a grinding wheel and claws with 1000 mm spacing, allows a significant reduction in machining time while maintaining high productivity. The shaft grinding machine weighs 4850 kg. Technical specifications of the 3B161 grinder - maximum workpiece length: 1000 mm - maximum workpiece diameter: 300 mm - grinding wheel diameter: ø 500 mm - maximum grinding wheel width: 60 mm - minimum grinding wheel width: 30 mm - grinding wheel spindle drive power: 5.5 kW - guaranteed elementary interval: 0.005 mm  ...

ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg

LIQUIDATION of meat kneading machine of blades with vacuum of the Spanish manufacturer CATO, model AV-100. Kneading machine perfect condition, ideal for the production of a wide range of meat products. Its condition is of occasion in perfect condition (re-release), reconstructed and guaranteed. External measurements 121 cm. width x66cm depth x 144cm height, kneading capacity 100liters (80kg). 3HP connection power, built in stainless steel in its entirety especially in contact with the product and interior frame of enameled iron. EMPTY KNEADING MACHINE, VACUUM MIXER, meat kneading machine, sausage kneader, meat machinery. Machine in perfect operation, revision up to date, rebuilt and guaranteed.

Large capacity mixer. Its condition is of occasion equipment completely revised and reconstructed, in its entirety (re-release) guaranteed. the mixer, mixer, vacuum massager of the Spanish manufacturer Sia, model AM-352-A. Characteristics: they consist of a cylindrical container and hemispherical bottom, inside which and in the middle of an intense vacuum, some blades rotate (in both directions, at will or automatic), which produce a double movement of the paste, in crossing and alternative overlap, which allows kneading, mixing and massaging all kinds of pastes, without pressure, without friction, Bruising or harmful heating, in addition to distributing perfectly and in a minimum of time, all the components of the mixture. These qualities stand out above all the kneaders-mixers-massagers on the market. On the other hand, and as a consequence of the depression created and the extracti ...

BIZERBA checkweigher, Check-Weigher CWM model. High quality equipment. Used equipment, its condition is excellent, fully restored and with guarantee. Includes Bizerba touch screen, GT-CT model. Internal checkweigher. Weighing tolerance from 6000 gr to 100gr. Maximum production capacity of 100 packs per minute. Electrical power 220V, 50Hz, 2.4 A. Total equipment measurements 1950 mm long x 1510 mm high x 580 mm wide, total work tape measurements 1430 mm long x 580 mm wide x 800 mm high (adjustable), work tape measurements 430 mm long x 300 mm wide x 3 units including the scale. Checkweighing, checkweigher, dynamic scale, control scale, checkweigher. Its condition is excellent re-release. Equipment reviewed and guaranteed.

Automatic vacuum packaging machine. Manufactured by VERIPACK model VKB23 / VKB039. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and anodized aluminum. The machine is ready to plug in and work with. This automatic vacuum system, which includes an outlet belt assembly, is a flexible solution for fast and automatic vacuum packaging. Characteristics: Dimensions of the vacuum chamber internally: 1110 mm x 1200 mm. Bell height 230 mm. Distance between sealing bars: 850 mm Useful length of sealing bars: 1080mm Total machine dimensions: 1650 mm high, length 3200 mm, width 1450 mm, 1090 mm working height. Output tape dimensions: 2000 mm long x 850 mm wide x 1090 mm high. Electrical power: 6.5kw, 380V 3 PHASES, 50-60Hz. Pneumatic power: 6-7 bar. Equipment fully overhauled, reconditioned  ...

LIQUIDATION of automatic vacuum packaging machine. SUPERVAC brand, model GK 169 B. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and anodized aluminum. The machine is ready to plug in and work with. This automatic vacuum system, which includes an outlet belt assembly, is a flexible solution for fast and automatic vacuum packaging. Characteristics: Dimensions of the vacuum chamber internally: 900 mm x 750 mm. Bell height 170 mm. Useful length of sealing bars: 650mm Total machine dimensions: 1550 mm high, length 2100 mm, width 1200 mm, 1090 mm working height. Electrical power: 6.8kw, 400V 3 PHASES, 50Hz, 17 A. Pneumatic power: 6-7 bar. BUSCH vacuum pump of 250 m3/h. Equipment fully revised, reconditioned and guaranteed. RE-RELEASE, OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you ne ...

LIQUIDATION of Bell vacuum machine from the ITALIAN manufacturer of high quality REEPACK, model RV400. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel. The machine is ready to plug in and work with. Busch vacuum pump: 63m3. RA 063 F 5R3. Final pressure: 0.5 mbar Vacuum system: per sensor External measurements of the machine: 630 mm x 770 mm x 950 mm. Camera dimensions: 525 mm x 625 mm x 190 mm high. Welding bar measurements: 525 mm x 1. Includes inert gas injection (M.A.P.) Weight: 195 Kg. Voltage: 380-400 V, 3 Ph, 50 Hz, 3.4 A. Vacuum machine, vacuum hood, vacuum packaging machine, vacuum hood machine, meat machinery, packaging machinery. Equipment fully revised, conditioned and guaranteed.

LIQUIDATION of Double hood vacuum machine from the German manufacturer of high quality KRAMER GREBE, model QUICK AUTOMATIC. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and aluminum. The machine is ready to plug in and work with. Busch empty pump: 63m3. Final pressure: 0.5 mbar Vacuum system: per sensor External measurements of the machine: 1000 mm long x 800 mm wide x 950 mm maximum height down lid, 850 mm working height. Camera dimensions: 430mm x 470 mm x 160 mm high. Welding bar measurements: 430 mm x 2. Weight: 175 Kg. Voltage: 380 V, 3 Ph, 50 Hz, Vacuum machine, vacuum hood, vacuum packaging machine, vacuum hood machine, meat machinery, packaging machinery. Equipment fully revised, conditioned and guaranteed. RE-RELEASE, OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buye ...

IMA CARTONING MACHINE, MODEL K150C Year of manufacture: 1995 (overhaul: 2011) K150 is an accessible, reliable and efficient cartoner ensuring quiet running at high speed. Its carton prebreaking and opening system combined to extrapositive carton handling by multiple belts ensures best carton forming control. Its design allows fast access and easy cleaning. The machine is equipped with a feeding system for bottles, a feeding system for vials, a GUK Cartonac 81 FA21/ 4 leaflet feeder, IncJet printing and control unit, Antares Vision print control system. TECHNICAL DATA Frequency: 50 Hz Voltage: 380 volts Power: Kw 4,5 Weight: Kg 1500 Production characteristics: Min carton dimensions: mm 20 x 12 x 50 Max carton dimensions: mm 85 x 60 x 190 Max production: 150 cartons/min Pressure: 6 ATM The K150 can handle a wide range of product feeding groups (bottles, squeezable  ...

Manitou 170 AETJL aerial work platform with 16.90 m working height The 170 AETJ-L aerial platform makes it easy to reach the most remote work areas. Equipped with an articulated structure, this model is characterized by an exceptional offset and overhang to be able to work at different heights and in different places without having to move the machine. Take advantage of the flexibility of its hydraulic movements for precise positioning in the work area! With its perforated platform floor, inclination detectors and load sensors, cylinder valves and negative braking system, the 170 AETJ-L aerial work platform allows you to carry out your work safely. This machine complies with: European Directives: 2006/42/EC - Machinery (recast EN 280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low Voltage) Make: Manitou Type: Articulated telescopic platform Type: 170 AETJ Year of construction: 20 ...

FINN POWER E-BRAKE 65-2550 HS TS 3 servo electric press brake built in 2007 in cooperation with SAFAN (now SafanDarley), achieves the highest quality of workpiece machining while maintaining low operating costs. The high press force of 65 tonnes, 6 numerically controlled axes (X, Y1, Y2, R, Z1, Z2), electric drive and low energy consumption make the machine the best choice among other press brakes available on the market. One of the machine’s greatest advantages is its electric drive, which eliminates the occurrence of the so-called deflection arrow effect and its compensation through even force distribution on the slider. Additionally, in order to increase the working speed and reduce noise, the FINN POWER press brake only consumes electricity when the slider is going down. The entire working area is protected by a programmable light curtain that, when interrupted by hand, allows f ...

Center height: 800 mm Center distance: 3000 mm Spindle bore: 92 mm Centre latheTOS TRENS - SUI 80  Swing over bed Ø:        800mm Swing over cross slide Ø:520mm Swing in the gap Ø:      870mm DBC Turning Length:      3000mm Gap length:              320mm Spindle bore:            92mm Spindle power:           15kW Bed width:               550mm Tailstock spindle Ø:     110Ø Stroke pinole:           210mm Spindle taper:           6Mk Speeds / ranges:         3200Rpm Feed rate X-Axis:        2400mm/min. Feed rate Z-Axis:        4800mm/min. Leng ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

cutting diameter: 200 mm saw band length: 2490 x 20 x 0,9 mm cutting width: 240 mm band speed: 40 / 80 m/min : 240 x 120 mm cutting capacity - round: 200 bei 90° mm cutting capacity - square: 200 bei 90° mm : 155 x 70 mm cutting capacity - round: 155 bei 45° mm cutting capacity - square: 130 bei 45° mm cutting capacity - round: 95 / 30° mm coolant tank: 15 l work height max.: 900 mm total power requirement: 0,75/0,95 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1,43 x 0,75 x 1,4 m The ARG 200 plus is a robust manual metal band saw with high cutting accuracy for small to medium-sized workpieces! Due to its compact design, this machine is ideal for use in workshops or maintenance. The basic equipment of the machine enables processing of a large number of different materials. With this machine, miter cuts from -45° to +30° are continuously possible (swivel rang ...

The Cabero heat exchanger model AC/VC099EB/IN is a powerful heat exchanger designed for use in industrial applications. With a test pressure of 32 bar and an operating overpressure of 28 bar, it is able to withstand even high loads. The heat exchanger consists of a robust housing made of high-quality stainless steel to ensure high resistance to corrosion and wear. Inside, there are numerous close-fitting stainless steel tubes that ensure effective heat transfer. The AC/VC099EB/IN is a plate-shaped heat exchanger capable of achieving high heat output with low pressure drop. It can be used for a variety of applications, including air conditioning of buildings, cooling of machinery and heat recovery in industrial processes. The heat exchanger is easy to install and maintain as it has a robust and accessible frame that allows easy handling and cleaning. With its high reliability and ...

The Ghermandi Caliber 300 belt grinding machine is a powerful machine for precise grinding of workpieces. With a length of 1.2m, a width of 1m and a height of 1.8m, it is compact and space-saving. The machine has a robust construction and precise operation, which ensures high accuracy even in demanding grinding jobs. Due to its versatile adjustment options, the Ghermandi Caliber 300 belt grinding machine is suitable for a variety of applications and ideal for use in workshops, production halls and other industrial environments. Further information can be found in the PDF file. ---------------------------------------------------------------------- ----- The Ghermandi Caliber 300 belt grinding machine is a powerful tool for precision grinding of workpieces. With a length of 1.2m, a width of 1m, and a height of 1.8m, it is compact and space-saving. The machine features a robust con ...

The belt sanding machine Ghermandi Caliber 300 2NT, type CL 300M RT 2N, is a robust and reliable machine, perfect for sanding metals, wood and plastics. With an output of 33.5 amperes and 380 volts, it is particularly powerful and can easily handle even heavy grinding work. The machine has a wide grinding table that provides a large grinding surface and allows precise work. The grinding table is also height adjustable to ensure an optimal sanding position. In addition, the belt sanding machine Ghermandi Caliber 300 2NT is equipped with a powerful motor and a stable belt run, which ensures uniform grinding quality. Thanks to its compact design and sturdy housing, the belt sanding machine Ghermandi Caliber 300 2NT is very durable and easy to operate. It is perfect for craftsmen, industrial companies and workshops that place high demands on their grinding machines. If you are looki ...

The machine type B1-35/30 is a surface grinding machine that was manufactured in 1972. It is characterized by its ability to grind surfaces precisely. The dimensions of the machine are 1.25 meters in length, 1.1 meters in width and 2.4 meters in height. More details on the nameplate. ------------------------------------------------- The machine type B1-35/30 is a surface grinding machine that was manufactured in 1972. It is known for its ability to grind surfaces with precision. The dimensions of the machine are 1.25 meters in length, 1.1 meters in width, and 2.4 meters in height. Further details can be found on the type plate.

Screw air compressor Ceccato CSB 30/10 MAX 10 BAR | ChillerTech - Compressed air compressors! Made just for you! The Ceccato CSB 30/10 screw compressor is the perfect solution to operate machine parts efficiently and maintain a pressure of 10 BAR. Its durable and user-safe design makes it the perfect compressed air solution. In addition, thanks to its readily available spare parts, the Ceccato CSB 30/10 is simple, fast and cheap to use, which means that you can reap many benefits from it, not only the short-term ones. The Ceccato CSB 30/10 MAX 10 BAR compressor is also very quiet (low noise version), which makes it user-friendly even when fully loaded. Armecell's sound insulation helps to silence compressor parts and ensure long-term operation, even in very harsh conditions. This is a guarantee of satisfaction and safety! Basic information: Manufacturer: Ceccato Model: CSB 30/ ...

For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the net ...

AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a  ...

BECKER VT 4.25 OIL-FREE ROTARY VANE VACUUM PUMP B0nnjc2quw Model: VT 4.25 Equipped with specially developed vanes, this oil-free vane pump is distinguished by its high abrasion resistance and extremely long service life. Due to the low consumption, there is also minimal dustiness, which is why the pumps in this series are perfectly suited for precise cleanroom cleaning processes. This innovation from Becker not only stands out because of its 100% oil-free operation, excellent performance and low energy consumption. In the area of sensitive vacuum, it also guarantees precise conduction of air with low pulsation. Becker guarantees the pumps a service life of 20,000 operating hours or a maximum of 3 years. Enhanced pump life also extends service life and can eliminate the need for frequent service visits, as costly pump failures are no longer an issue. SPECIFICATIONS: Power: 0. ...

BECKER VT 4.25 OIL-FREE ROTARY VANE VACUUM PUMP B0nnjc2quw Model: VT 4.25 Equipped with specially developed vanes, this oil-free vane pump is distinguished by its high abrasion resistance and extremely long service life. Due to the low consumption, there is also minimal dustiness, which is why the pumps in this series are perfectly suited for precise cleanroom cleaning processes. This innovation from Becker not only stands out because of its 100% oil-free operation, excellent performance and low energy consumption. In the area of sensitive vacuum, it also guarantees precise conduction of air with low pulsation. Becker guarantees the pumps a service life of 20,000 operating hours or a maximum of 3 years. Enhanced pump life also extends service life and can eliminate the need for frequent service visits, as costly pump failures are no longer an issue. SPECIFICATIONS: Power: 0. ...

Here Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No. 7 GDPR and Data Protection Officer: The person responsible for the processing of your data is: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 04847 8068-0  ...

DAMET MP 15 - 18 Pneumatic Hand Staplers / Carton Staplers / Box Staplers are hereby offered for sale. Each item works flawlessly and has been regularly serviced. -Booklet Type: 35/15; 35/18 -Magazine capacity: 100pcs. -Operating pressure: 5 - 7 bar -Power: 2 connections/sec. -Air pressure: 0.067 m3/min -Drive: manual -Weight: 1.59kg - Dimensions (L x W x H): 300 x 100 x 200mm Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to pr ...

DAMET DS-3519-E Compressed Air - Carton Lid Stapler is hereby offered for sale. The items work perfectly and have been regularly maintained. -Tool Type: Pneumatic -Magazine capacity: 100 -Working pressure: 4.9 - 7.1 bar / 71 - 103 PSI -Air consumption: 1.13 liters per shot at 5.6 bar -Compressed Air Connection Thread Type: 1/4 BSP -Dimensions (L x W x H): 345 x 115 x 233mm -Weight: 2.45kg - Diameter: Min. 0.8mm / Max. 2.25mm -Length: Min. 15mm / Max. 19mm -for the following staples: 35 / JK560 / Prebena B / BeA Packfix A / Senco XB Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise st ...

KT7 CNC KRP 150 X 300 SILVER plasma cutting machine built in Poland in 2019, offers its user fast and precise machining of sheet metal weighing up to 4 tonnes. The compact design and all components of the machine have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. For cutting workpieces, the machine uses a fully automatic torch with a special Torch Sensor Control (TSC) system, which prevents damage to a torch during operation. The KT7 CNC plasma cutting machine is also equipped with an integrated control module with SheetCAM CAM software and additional functions to improve the machine’s operation. Technical data of the KT7 CNC KRP 150 X 300 SILVER plasma cutting machine - work table surface (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110-270 mm - polished slats and gears - ball convey ...

• FATOSA automatic chopper model PA-130. • Automatic feeding system by loading hopper and tapered feeding spindle, to output spindle, plate carrier and cutting blades. • Perfect chopping without rubbing or bruising, characteristics that, together with its great robustness, make it stand out from the rest of the machines on the market. • The machine is designed for mincing meat, fish, vegetables... • The minimum temperature at which the products to be chopped can be will depend on the motor power chosen, the diameter of the holes in the outlet plate and the combination of plates and blades that has been mounted. • Push-button control panel. • General power switch • Made entirely of AISI-304 stainless steel • Gearbox transmission with hardened and ground shafts, mounted on bearings and gears in oil bath. Alloy steel knife shaft suitable for bending and torsional ...

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Pneumatic stapler or clippers for sausages from the manufacturer Maquinaria cárnica SERRANO S.L., model CH520 double staple, to be able to attach to stuffer. Its condition is completely renovated, revised and guaranteed. Built in stainless steel in its entirety to the passage of the product. Pneumatic drive. It allows to put twine, cut between staples or not. The staple that can work is the CH-510 / CH-520. Equipment fully revised, reconditioned and guaranteed.

For sale Portioner for minced meats from the manufacturer CFS, model PORTIONCUT. Its condition is completely renovated, revised and guaranteed. Built in stainless steel in its entirety to the passage of the product. Electrical connection at 220-240 V / 50-60Hz 0.35kW. External dimensions 1320 x 600 x 1120 mm high. Weight 100kg.

GEIBEL UND HOTZ FS 420 SC surface grinding machine manufactured in 2006 in Germany, is designed for single or serial grinding of workpieces. The machine, distinguished by its high performance and reliability, machines workpieces with a maximum weight of 150 kg with the circumference of grinding discs on a magnetic plate with holding force control and demagnetisation function. During the process, special sensors ensure that the grinding wheel is properly balanced, guaranteeing the highest precision and quality of machining. The GEIBEL & HOTZ FS 420 SC magnetic grinding machine uses an energy-efficient hydraulic system to drive the work table, which provides the exact oil flow required to move the table. The pump is equipped with special filters to remove ferromagnetic impurities and non-magnetic substances from the coolant, resulting in safe and trouble-free operation of the grinding m ...

Retraction tunnel from the manufacturer CMA Macchine automatiche, model TR350, for coupling to any packaging machine. High quality equipment. Used equipment, its condition is excellent, fully restored and with guarantee. External dimensions 2010 mm long x 1500 mm wide x 1360 mm high, work tape height 800 mm. Tunnel mouth measurements 430 mm wide x 290 mm high. Support tape measures 2010 mm long x 300 mm wide x 780 mm working height. Electrical power 400V + N + T, 50Hz, 19Kw. Retraction tunnel, retractable tunnel, retract furnace, shrink tunnel, Its condition is excellent re-release. Equipment reviewed and guaranteed.

Double hood vacuum machine from the high quality manufacturer TURBOVAC, model SB1000LL. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and anodized aluminum. The machine is ready to plug in and work with. Busch vacuum pump: 250m3/H. Final pressure: 0.5 mbar. Vacuum system: per sensor. External measurements of the machine: 1930 mm long x 1170 mm wide x 1400 mm high. Working height measurement 1000 mm. Camera dimensions: 840 mm x 820 mm x 190 mm high. Welding bar measurements: 820 mm x 4. Double welding. Weight: 700 Kg. Voltage: 380-400 V, 3 Ph, 50 Hz.

The PolyClip FCA 3430 is an automatic clipper, stands out as a dependable and high-quality tool for clipping a range of casings, accommodating sizes from 24-60mm and up to 90mm for plastic types. This device is compatible with various stuffers that have portioning capabilities. The FCA 3430 can perform up to 200 cycles per minute. Its operation is managed through an intuitive, clear touch screen. The machine’s durable stainless steel construction contributes to its extended lifespan. Specifications: Manufacturer: Poly-Clip Model: FCA 3430 Dimensions: Height – 2015 mm, Width – 1445 mm, Length – 1200 mm Weight: 570 kg Power Supply: 400V 50Hz 3N Efficiency: Capable of 200 cycles per minute.