136,125 used machines on RESALE, but how to find them? Machine Search
new
: neu : 2024 : 9741 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compact X-ray inspection system for packaged food, This Ishida IX-EN-2493-S is an X-ray inspection system built in 2015 by the Japanese manufacturer Ishida. It detects high-density foreign bodies in packaged products, such as ferrous and non-ferrous metals, stainless steel, glass, stone and bone. The tunnel is 240 mm wide and 150 mm high, the belt runs at a variable 10 to 60 m/min and handles products up to 5 kg and from 20 to 450 mm long., The machine is built in stainless steel (SUS304), has an IP66-rated inspection chamber and is operated via a 15-inch touchscreen. The line sensor has a resolution of 0.4 mm. Actual detection sensitivity depends on the product, its dimensions, the packaging and where the contaminant sits., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2015-ishida-ix-e ...
sheet width: 3100 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm cutting angle: 0.5 - 2.5 ° cutting gap adjustment: 0.05 - 0.8 mm no. of strokes: 12 - 50 Hub/min back stop - adjustable: 1000 mm Control: ELGO TYP 85 oil volume: 120 ltr. engine output: 13.0 kW weight: 6300 kg. range L-W-H: 3950 x 1950 x 1680 mm very well-maintained condition () Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC Type 85 control unit Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - NC motorized backgauge With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual The data for this ad was created wit ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Feature Specification Capacity 8 trays Tray dimensions 60 × 40 cm Electrical power 18.4 kW Power supply 400 V, three-phase Control system IS600, digital Temperature range approx. 30–250 °C Steam function Yes, with appropriate water connection
tool adaptor: SK40 weight: . kg material: . 37 pieces 9 angetrieben The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Macs double infeed conveyor with infeed height of 1000mm, belt width of 310mm and dividers of 60mm high., Macs double cross feeder of 2000mm long and belt width of 200 mm., Macs stainless steel platform with stairs and washing wall., Macs distribution system with swingchute,including tool trolley., Complete installation is never used, new out of the box!, Capacity: up to 200 WPM (double outlet), Heads: 16 pcs., Buckets: 3 litres, Weighing capacity per head: 400g / 800g, Accuracy: 0.5-1g / 1-2g, Volume per single dump: max 4.5 litres, Compressed air: 8 - 10 Bar, Dimensions: 5000 x 7500 x 4500 mm, Power: 3 x 400V, 50Hz, 16A, Weight: Total +/- 5000 kg
Offered is a single-lane tray sealing line for food packaging. Sealing tool: 6 impressions. Tray format: Ø 148mm. Tray material: PP barrier. Tray volume max.: 550ml. Control system: Electronic machine control system with operator panel. Equipped with: Carsoe Anytray Denester (tray denester), Ishida infeed conveyor with indexing chain, length 6000mm, Ishida single-lane tray sealer QX1100 with 6-impression sealing tool including tooling trolley, Ishida conveyor belt, length 2400mm, Ishida X-ray inspection system IX-EN-2463, year of manufacture 2018, Ishida checkweigher DACS-G-S015-24-SS, year of manufacture 2018, Ishida discharge conveyor, length 1400mm, Ishida spare parts package. Low operating hours. Inspection is possible by arrangement.
Machine working can sort va individually high technical level complete documentation service
table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.
vertical machining center, year 2010, CNC iTNC 530. Used machine. More info & price on IndustrialBuyer.
ISO 50, ISO 40, BT 40, BT 50 , SK30 miscellaneous aprox 230 Units Auction-ID: A1-51153-61
Mobile 4-gloves Isolator for sterility testing. Working chamber with 4 sleeves for working with sterile materials. Incl. air sampler Theo MAS-100/ISO. PLC: SIEMENS S5. Unit requirements cleanroom Grade A.
Explosion protection valve VENTEX-ESI-E single-acting, DN200, Type5-A/N/P3 vertical or horizontal installation Passive without control and external energy Approved and certified safety technology from Switzerland
PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-B-DCI-24/230 -Number: 11x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece
PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-DCI-24/230 -Number: 2x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece
Offer here a large vacuum slider from VAT, Model: F19-107685/1 He sealed a Leybold CoolVac 10000, which can also be purchased as an option.
Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg
Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available -Price: per piece -Weight: 140 g
Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Type: CPV-14-VI 18210 CPV14-GE-MP-6 -Dimensions: 165/95/H110 mm -Weight: 1.5 kg
Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)
Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Type: CPV10-GE-MP-8 -Electrical connection -Price: per piece -Number: 2 pieces -Dimensions: 140/120/H80 mm -Weight: 1.4 kg
Ex signal isolator, isolated barrier -K series -Product number: 14493S -Explosion proof -Number: 5x available -Price: per piece -Dimensions: 95/70/H18 mm -Weight: 0.1 kg
Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: FESTO -Type: CPV10-GE-FB-8 -Electrical connection -Dimensions: 195/125/H80 mm -Weight: 1.2 kg
Valve islands, multi-pin connection, directional valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island CPV14 -Type: CPV14-GE-DI01-8 CPV14-VI -Valves: Festo 161 361 8 pieces -Individual components: see photos -Dimensions: 250/150/H100 mm -Weight: 2.6 kg
Single-phase isolation transformer, portable Type: ETR -Power: 300 VA -Protection class: IP 44 -Frequency: 50/60 Hz -Primary: 230 V -Secondary: 230 V Price: per piece Quantity: 3 available -Weight: 4.2 kg
Single-phase isolation transformer, portable Type: ETR -Power: 400 VA -Protection class: IP 44 -Frequency: 50/60 Hz -Primary: 230 V -Secondary: 230 V Price: per piece Quantity: 3 available -Weight: 6.6 kg
System Overview This is a purpose-built, containerised ISO tank and road tanker washing system, custom-designed and manufactured to a high specification. The complete system is housed in two standard 40ft ISO containers, making it fully mobile, easy to deploy, and ready for international shipment. The system comprises two independent but complementary units: ► Unit 1 — Tank Washing Unit: A fully equipped hot and cold pressure washing system for ISO tanks and road tankers ► Unit 2 — Wastewater Treatment Plant (WWTP): A physicochemical water treatment system for effluent compliance and water recycling ★ Capacity: 5–8 ISO tanks per day + 3–4 road tankers per day ★ Self-contained: all pumps, burners, controls housed within the containers ★ Water recycling: treated water returned to wash cycle — reduces fresh water consumption ★ Compliant: designed to meet Ha ...
Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU 3 UI 120/75 ( 3UI120/75 ) 5.0 kVA Prim. 3 x 400 V sec. 3 x 220 V AC 13.12 A 50 - 60 Hz spare part for TRAUB TND300 ! used, tested ! Dimensions: 240 x 155 x 200 mm
Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 25 S ( RDRKL25S ) 0.8 kVA Prim. 3 x 380 V sec. 24 V DC 25 A 50 - 60 Hz spare part for TRAUB TND300 ! used, tested, with downstream three-phase bridge rectifier ! Dimensions: 210 x 210 x 190 mm
Technical Specifications & Performance Data The Used Ispector Logico 2016 CPWE is a dynamic checkweigher engineered for precise weight control in industrial packaging and beverage production environments. Ideal for end-of-line verification on a used bottling line or second hand packaging line, it helps ensure compliance with declared weights for cases, cartons, trays, and shrink-packs before palletizing. Manufacturer: Logico Model: CPWE Year: 2016 Inspection type: Weight control (Inspection type: 2) Applicable weight range: 0.2 – 30 kg Handled items: Boxes, cartons, cases, shrink-packs Dimensions: Width 780 mm, Length 680 mm, Height 1800 mm Electrical requirement: 230 V, 50 Hz Operating state: Disassembled; condition: in storage Production speed: Application-dependent based on line conveyor speed and product weight Safety: Accident-prevention protections included Advanced Automation & ...
Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 10 S ( RDRKL10S ) 0.34 kVA Prim. 3 x 380 V sec. 24 V DC 10 A 50 - 60 Hz spare part for TRAUB TND300 ! used, with downstream three-phase bridge rectifier ! Dimensions: 165 x 155 x 160 mm
Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKG 40 KM ( RDRKG40KM ) 1.2 kVA Prim. 3 x 230 / 400 - 480 V sec. 24 V DC 40 A 50 - 60 Hz with downstream three-phase bridge rectifier ! Dimensions: 285 x 230 x 210 mm
Clamp Set, Clamp, Claw Clamp M/S BOC EDWARDS ISO63-250 C10007090 Clamp set consists of 8 clamps ! New !' Dimensions (single clamp): 60 x 24 x 30 mm Dimensions: 180 x 130 x 40 mm
2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...
Agilent G 1310 A Isocratic HPLC Pump Flow Range 0.001-10 ml/min
Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used
A deposit of €113.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ABSENT BOOKLET CDP ABSENT Body size 4000x2100x1850 mm The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity ...
General Description Thermal break rolling machine manufactured by Schüco International KG , model ISOMAT 5 . Designed for rolling polyamide insulating strips into aluminium profiles to produce thermally broken window, door and curtain wall sections. Suitable for aluminium profile fabrication and façade production. Technical Details Manufacturer: Schüco International KG Model: ISOMAT 5 Machine type: Thermal break rolling machine Year: 1998 Article No.: 299563 Serial number: 792-125 Power supply: 400 V, 50 Hz Motor power: 1.1 kW Rated current: 3.0 A Multiple precision rolling stations Adjustable guide rollers Profile support/feed table Emergency stop Weight: 660 kg Condition Good used industrial condition. The machine appears complete with roller assemblies, guide rollers, feed table and safety guards installed. Original Schüco paint is present with normal cosmet ...
Complete laboratory equipment with work island, workbenches, sinks, boilers and Argon connections Specifications: Product Type: Complete Laboratory Equipment / Laboratory Work Furniture Location: first floor Central laboratory island: approx. 3,400 x 1,500 x 985 mm (L x W x H) Laboratory workbench / desk: approx. 4,500 x 880 x 770 mm (L x W x H) Laboratory workbench / desk: approx. 6,010 x 880 x 770 mm (L x W x H) Laboratory workbench / desk: approx. 4,480 x 880 x 770 mm (L x W x H) Number of sinks: 4 Number of Argon Couplings: 13 Features: 1x central laboratory island Various laboratory workbenches / desks 4 sinks Cranes Water heaters 13x Argon coupling Various laboratory connections Pressure regulators with pressure gauges Surface-mounted unit with various connection points Various electrical connections / wall sockets Worksheets Base cabinets Drawer units ...
maximum number of results exceeded
please refine your search
700 € 
