is used for sale

UV dryer, UV lamp, UV high-performance lamp -The lamps come from a UV paint drying process -Working width: 1400 mm -One housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 -Emitter power: 80 W / cm -Number: 2x tubes available -Price per piece -Transformers and accessories: available for an extra charge -Dimensions: 1720/340 / H630 mm -Weight: 94 kg / piece

UV dryer, UV lamp, high-performance UV lamp -the lamps come from a UV paint drying process -Working width: 1400 mm -Double housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 - Radiator power: 80 W/cm² -Quantity: 3x dryer lamps, each with 2 tubes included Price: per piece -Transformers and accessories: available at extra cost (2x ID13948 and 2x ID13949 or ID13950) -Dimensions: 1720/400/H630 mm -Weight: 126 kg/piece

Loading deck furnace Wiesheu Manufacturer : Wiesheu Year of construction : 2006 Type : EBO 1-68R IS500 per floor 1 x 60x80cm trays with proofer on castors Mobile per floor 3N-PE AC 400/50Hz approx. 1.8kW Shelf height 16cm Exterior dimensions: W: 94cm D: 135cm H: 210cm Defect protection flies out Details see picture

Deck shop baking oven Wiesheu EBO Manufacturer : Wiesheu Type : EBO 1-68R IS500 Year of construction : 2006 3 floors per floor 60x80cm trays or 2x 60x40cm trays with proofing cabinet for 20 trays Exhaust hood with steam apparatus on castors Mobile floor height 16cm External dimensions : W: 94cm D: 135cm H: 210cm 3N-PE AC 400/50Hz per floor 5,15kW Details see picture

Hydraulic pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer:GSL, hydraulic pump from aerial work platform -Electric motor: GSL type IS1-RA-VP2-Q 24 volts / 4000 watts -Hydraulic pump: Marzocchi 2BK7 S 6 -Dimensions: 220/160/H440 mm -Weight: 26 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schad Sintec, transformer type ISK-DK 30.32 -Output: 24VDC / 30.0A -Technical data: see photo nameplate -Dimensions: 230/170/H175 mm -Weight: 11.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schad Sintec, transformer type ISK-ST 630 -Input: 400V / 1.7A / 50-60Hz -Output: 230V / 2.74A / 630VA -Technical data: see photo nameplate -Dimensions: 130/120/H155 mm -Weight: 10.1 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, two-phase stepper motor -Manufacturer: isert-electronic: two-phase stepper motor 1.8° -Gearbox: 3465 A2411-9212-A2 -Engine: Oriental engine type 2GK9K -Shaft: Ø 8 x 27 mm -Quantity: 6x stepper motor available -Price per piece -Dimension: 135/60/H60 mm -Weight: 0.9 kg/pc.

Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: IST, rotary encoder -Type: BG-30-W-04-PP-00100-0-3-24-V009 -Voltage: 5-24 V -Shaft: Ø 4 x 10 mm -Number: 8x encoders available -Price per piece -Dimensions: 90/90/H60 mm -Weight: 0.1 kg/piece

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet ,Transformer -Type: IST 474/16/OJ -Power: 0.100 kVA -Voltage: 380V / 42V -Technical data: see photo type plate -Dimensions: 150/100/H100 mm -Weight: 2.2 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head -Type: F90SD-D125-40-12 -Hole: Ø 40 mm -Dimensions: Ø 125 x 65 mm -Weight: 2.7 kg

servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Isoflux, servo motor with encoder -Servo motor: Type 544,4,25,98/90 -Speed: max: 2500 rpm -Voltage: 96 V -Shaft: Ø 16 x 50 mm -Bolt circle: Ø 130 x 10 mm -Protection class: F -Encoder: Heidenhain ROD 426 1000 -Dimensions: 490/127/H150 mm -Weight: 14.9 kg

Glass Bottle Filling Line 1000 bph With Isobaric CICE Careddu Filling Block This CICE Careddu GOLD DPS 6/6/1C is a compact rotary triblock bottling machine integrating 6 rinsing stations, 6 isobaric filling valves, and 1 crown capping head for hygienic packaging of beer in glass bottles. The system ensures controlled counterpressure filling to with air pre-evacuation with CO2 maintaining carbonation and minimizing oxidation during the bottling process. Filling block has Siemens S7 PLC control system. Filling bloc has CIP system for sterilizing equipment inside and outside with 85C hot water. The line contains also rotating infeed table where empty bottles are manually places, CICE Careddu Compatta labelling station for self-adhesive labels. It has a one roll fed label station and it is intended for the application of one label per product, typically used for front labelling, iden ...

General SKU360U949 LocationBarneveld CEcheck MakeÄktaprocess Main Features MaterialStainless steel Motor0.37 KW Specified Features - Miscellaneous filter Motor0,37kW, 220-240/380-420Volt, 1370rpm Capacity6Ltr/h Miscellaneous filters MaterialStainless steel General No.29000032 Year of construction2011 Mounted on wheelscheck Floor space1,7x0,90 m Total height1,64 m Weight370 kg Extra information Max system pressure 6 bar at 40°C, 3 bar at 60°C, pneumatic supply 3-6 bar, max power 1500 VA, 230 volt, with B&:R touchscreen display, stainless steel keyboard, Lewa pump unit, type EEC0000-13, cap. 6 ltr/hour, Endress+Hauser flowmeter Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCo ...

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

General SKU440W1452 MakeAgilent Technologies LocationBarneveld CEcheck Type1100 series Specified Features - HPLC Capacity100x 2 ml vials in 1 tray, 40x 2 ml vials in 1/2 tray, 15x6 ml General No.DE43628255 Year of construction2005 Floor space1,00x0,60 m Total height0,80 m Weight100 kg Extra SpecificationsHPLC with autosampler.UV-visible detectors, pumping system, fluorescence detector, LC/MSD unit, refractive index detector, GPC/SEC system, Micro plate sampler, 220, Chem station&:nbsp:all product nr:s:G1314AG1312AG1379AG1316AG1367AG1330BPowdered foodsGeneric medicinesHPLCOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeverages ...

General SKU268K300 LocationBarneveld MakeGlatt Inox AG Process Technology TypeIST-2000 No.100117 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor75 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 l Trough sizesø 1350 x 1500mm InletDN300 Outlet300 x 220mm With jacket87+93+15 l Shaft can be heatedHeating surface total 12 m² Max. temperature-20/160°C With mechanical sealcheck Motorhydr. unit 75,0 + 45,0 KW, 400/690 Volt (Ex) MaterialStainless steel 1.4404 (316L) With jacketcheck General Year of construction2001 Floorspace4,6 x 2,2 m Total height6,0 m Weight12.000 kg ATEX designedcheck Extra information Extra Specificationsincluding Brüdenfilter 3m2 Powdered foodsGeneric medicinesOintmentsPaddle dryersFine chemical ...

Bridge type Machining Centre ISPER HASP 643 WAVE - 30.000 rpm - travel 650x420x350 mm - CNC SELCA 4045D, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 700x400 mm, Longitudinal travel x axis: 650 mm, Cross travel y axis: 420 mm, Vertical travel z axis: 350 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 20.000 mm/1, Rapid feed x-y-z axes: 20.000 mm/1, Spindle taper type: HSK 40-E, Automatic tools change nr.: 20, Spindle speed: 0- 30.000 rpm, Spindle motor power: 8 Kw, Cnc: SELCA 4045D, Approx net weight: 4.500 Kg, Accessories: Chip conveyor, RENISHAW Probe

- for grain / nuts grind (very fine) - for grain / nuts grind (fine) - for grain / nuts grind (medium fine) - for grain / nuts grind medium, breadcrumbs (fine), white bread - for grit coarse, breadcrumbs (medium), mixed bread - Breadcrumbs coarse, mixed bread, white bread - Wholemeal bread - Pumpernickel Screens available 125 + 175 mm Filling: Big Bag Mill footprint: 1800 x 1200 mm Total height of the mill: approx. 4200 mm

Code: 0369 Brand: ISVE Model: 25/66 Rotary blade grinder for wood scraps, plastics, packaging, nut shells, fruit stones and pits, leather scraps, wood bark, loppings of trees, and other materials Motor Hp 7,5 (Kw 5,5) Inlet opening diameter mm 250 x 660 It can be connected to a dust collector using a tube placed under the screen Overall dimensions: mm 930 x 770 x 1800 h Weight kg 680

Used Bilz ISG 3400 Induction Device - Tool Shrink Machine -with a Standalone Liquid Cooler BILZ FKS 3400

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.

Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically trig ...

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer -Type: ISTK -Item No.: 469133 -Power: 1500 VA -Voltage: 380V / 110/220V -Technical data: see photo of the nameplate -Dimensions: 220/155/H150 mm -Weight: 13.1 kg

OHAUS ISHD16HDG Incubator with Orbital Agitation OHAUS Stirrer Incubator Reference: ISHD16HDG Year of manufacture: 2021 Movement: Orbital, 19 mm Capacity: 16 kg at 75 rpm and 2.3 kg at 500 rpm Temperature range: Room temperature + 5 °C to 65 °C Uniformity: ± 0.5°C to 37°C Speed range: 15 rpm to 500 rpm Tray dimensions: 330 mm x 279 mm Dimensions: 356 mm x 648 mm x 406 mm Internal dimensions (H x W x W): 241 mm x 340 mm x 305 mm Net weight: 36 kg Power supply: 220 V Power consumption: 450 W Speed Accuracy: Above 100 RPM ± 1%, Below 100 RPM ± 1 RPM Speed range: 15 to 500 rpm Timer: 1 second to 160 hours Housing: Aluminum Operating Conditions: 15°C to 32°C, 80% RH, non-condensing

The machine is in good technical condition; testing is possible by prior arrangement. SPACESAVER SS 2101. Fanuc MSX-850 system.

The machine is in good technical condition; testing is possible by prior arrangement. Fanuc Oi-TD system.

The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD system.

sheet width: 1250 mm plate thickness: 1.5 mm roll length: 1270 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 400 kg range L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 2050 mm : 4 mm : 140 mm : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 € : 786.92 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5.5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ca. 12 - 14 Wochen ab Auf : Türkei : 21400 € : 5 mm : 1200 mm : 4,1 m/min : 3000 mm : 750 mm : 1400 mm : 1350 kg : 250 / 2000 mm : 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment (prices on request): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Used Filler Cobert Exacta Isobaric: Year: 2014 Condition: As Is Used Filler Cobert Exacta Isobaric: Completely overhauled with update in 2014 Fixed tank 20 valves with pre-evacuation degassing Vacuum pump Pneumatic bottle lifting pistons with air recovery External valves washing device Machine frame painted and partially covered in stainless steel Direction: clockwise Variable production speed via inverter Production 2,300 bottles per hour of 0.750 Safety protections Code: T 205 More details: https://bottlingscout.com

Used Used filling monoblock isobaric Axtra: Year: 2016 Condition: As Is Filling monoblock AXTRA isobaric Year: 2016. Speed: 300 bph sul 0.5 lt. Direction: Linear. Model: SA/L-G5/L-IV5/L-C1-CW/L-T1. 5 filling electro-pneumatic valves 5 rinsing nozzles Double pre-evacuation Corker ? Crown cap 26 and 29mm. Adhesive labeller. Front and back label. Hot foil printer Capsuling machine PVC Safety protections. Code: QT 253 More details: https://bottlingscout.com

Used Used MBF isobaric filling monoblock for glass bottle: Year: 1999 Condition: As Is Model: Syncrofill 1440.32hp/360.4R Year: 1999 Product: wine Speed: 6000 bph Direction of rotation: clockwise Processable container type: glass bottles Isobaric filler with 32 mechanical valves Valve functions: double pre-evacuation and self-leveling 4-head corker for mushroom corks Inert gas injection system before corking Safety protection Code: QT 793 More details: https://bottlingscout.com

Used Used Procomac 50.60.10 Isobaric Triblock: Year: 1995 Condition: As Is Model: FILLSTAR ? PET2 6010 113BLOC Year: 1995 Speed: 15,000 bph in 1.5 L format Counterclockwise operating direction Processable container type: PET bottles Rinser with 50 clamps, fixed nozzle, single water treatment Isobaric filler with 60 mechanical valves - Valve functions: sanitization and degassing Arol capper with 10 heads for 28 mm PCO 1881 pre-threaded plastic cap - Distribution system: pick & place Safety protection Code: QT 796 More details: https://bottlingscout.com

Used Used CFT isobaric filling triblock 40.40.8 for PET bottle, of the year 2021, 12.000bph: Year: 2021 Condition: As Is Model: MASTER RS/CS 40/40/8 Year: 2021 Speed: 12,000 bph for 0.35 L format Clockwise direction Type of container handled: PET bottles Rinser with 40 fixed nozzle clamps with 1 water treatment Isobaric filler with 40 electropneumatic valves, bottle neck handling Valve type: electropneumatic valve opening, mechanical depressurization and sanitization Valve functions: sanitization, depressurization Arol capper with 8 heads for plastic pre-threaded caps Distribution system: pick & place Neck finish: PCO 1881 Cap elevator Safety protection Power supply 600 V 60 Hz Code: QT 797 More details: https://bottlingscout.com

Used Used Cortellazzi vega 20 isobaric filler: Year: 1989 Condition: As Is Model: Vega Year of Manufacture: 1989 Hourly Production: 2,700 BPH with 0.75 L bottles Rotation Direction: Clockwise Suitable for: Glass bottles Number of Valves: 20 Isobaric filler with mechanical valve equipped with: Pre-evacuation Self-leveling Degassing Manual tank height adjustment Dummy bottles Suitable for bottles with diameters: ? 65mm, ? 77mm, ? 87mm, ? 111mm Machine Dimensions: 2.5 m x 2 m x 2.5 h Safety protections included Code: T 203 More details: https://bottlingscout.com

Used Used Gai isobaric filling triblock 24.28.6: Year: 2016 Condition: As Is Model: 8031RE ? BIER - 001 Year: 2016 Speed: 8,000 bph for 0.33 lt format Clockwise direction Available in 0.25 lt, 0.3 lt, 0.75 lt formats Height adjustment: electric Rinser with 24 clamps with mobile nozzle 2 treatments: air and water Isobaric filler with 28 electropneumatic valves Valve functions: single and double pre-evacuation/self-leveling/degasification ?26 mm crown capper with 6 heads Foaming before capping Cap elevator Safety protection Code: QT 798 More details: https://bottlingscout.com

Used Used Gai isobaric filling triblock: Year: 2019 Condition: As Is Model: 4531FE ? BIER - 002 Year: 2019 Speed: 4,500 bph for 0.25 L format Clockwise direction Available in 0.25 L, 0.3 L, 0.75 L formats Rinser with 16 clamps and mobile nozzle 2 treatments: air and water Isobaric filler with 16 electronic valves Valve functions: single and double pre-evacuation/auto-leveling/degasification ?26 mm crown capper with 3 heads Foamer before capping Cap elevator Safety Protection Code: QT 799 More details: https://bottlingscout.com

Used Used Virmauri isobaric filling monoblock 80.130.15 for glass bottle: Year: 1994 Condition: As Is Year: 1994 Capacity: 13,000 bottles per hour (bph) Direction of operation: Clockwise Container type: Glass bottles Bottle Rinser 80 clamps with fixed nozzles Single water rinsing treatment Isobaric Filler 130 mechanical filling valves Valve functions: Single pre-evacuation Automatic level control Deaeration Plastic Mushroom Cork Capper 15 capping heads Cap size: ?30.5 mm Cap feeding system: Pick & Place Safety protection Code: QT 803 More details: https://bottlingscout.com

Used Used MBF isobaric monoblock 18.24.1 for still and sparkling wine: Year: 2008 Condition: As Is Model: 720/18 960/24HP 1S SX Year: 2008 Speed: 2,500 bph sparkling wine ? 3,000 bph still wine Direction of travel: clockwise Rinser with 18 fixed-nozzle clamps One water treatment Isobaric filler with 24 mechanical valves, pre-evacuation and automatic level control Arol single-head corker for mushroom cork and straight cork Vacuum system before corking Safety protection Code: QT 811 More details: https://bottlingscout.com

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 € : 100.36 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 € : 236.16 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 970 € : 1 : 1.2 mm : 100 mm : 140 nm : 7 Stk. : 62 mm : 560 mm : 220 mm : 500 mm : 50 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 € : 470.4 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 57300 € : 804.11 € : 1 : 42100 € : 60 to : 2100 mm : X und Y Achse : 160 mm : 1700 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 7.5 kW : 2450 mm : 1600 mm : 2235 mm : 4340 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms laser safety device Fiessler motorized crowning table intermediate pieces for the upper tool clamping die holder for 60 mm tools die with 4 V openings upper tool, slightly cranked, sectioned foot pedal user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From a current recycling we offer you a young municipal tractor ISEKI TM3267. Year of manufacture: 2023 First registration:./. Condition: good HOURS: 120 Asking price: 26.900,00 Original price: €30,500.00 Equipment / accessories / other information: -Sweeper 1.30 m -Salt shaker Cono 273 / 200 liters -Snow plough blade 1.50 m Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68273 Mannheim The sale is without warranty Subject to prior sale

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...