iron used for sale

brand new fuel oil tank - diesel tank - storage tank with a capacity of 5,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - iron gray / RAL sh ...

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...

Pressure gauge ELEKTRON KARDZHALI, PRESSURE GAUGE VARNA 0 - 0,0 - 0,0 6 kp/cm² ( 0 - 0.6 bar ) Accuracy class: 1.6 graduation: 0.01 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 Material: Brass, Housing: Iron New ! Dimensions: 210 x 162 x 56 mm

Water tanks, extinguishing water tanks and heating oil tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Tank Underground tank Slurry tank Polyester tank GRP tank PE tank Ferric chloride tank Iron III water tank Steel tank Molasses tank By-product tank Oil tank Pressure tank Irrigation Irrigation Riding arena irrigation ebb and flow system Sports field irrigation Diesel tank Fuel oil tank Yard filling station Tank water facility Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used heating oil tank according to DIN 6616 in the size of 100,000 litres is offered. Volume: 100,000 Ltr. Material: steel tank tank, material S235JRG2 Tank according to DIN 6616 Tank shape: cylindrical, horizontal, in integra ...

Gearbox, worm gear CITROEN MESSIAN DURAND Type 80 C ( 80C ) i = 60 Input: coupling for shaft diameter: Ø 35 mm shaft length: 65 mm, groove width: 8 mm flange: Ø 114 / 172 x 172 mm bolt circle diameter 1: Ø 150 mm, 4x bore: Ø 12 mm bolt circle diameter 2: Ø 200 mm, 4x threaded hole: M12 x 1.75, continuous output: shaft diameter: Ø 40 mm, shaft length: 110 mm, groove width: 12 mm flange: Ø 180 mm bolt circle diameter: Ø 226 mm, 4x threaded hole: M10 x 1.5, depth: 12 mm material (housing): Cast iron used, tested ! Dimensions: 420 x 280 x 260 mm

Carrier clamp, 43 pieces LINDAPTER® FL108T Thread: M8 x 1.25 Adjusting screw: M8 x 1.25 Clamping range: 3 - 17 mm Clamp length: 20 mm Material: malleable cast iron, galvanized Other quantities on request ! New ! Dimensions ( single terminal, without screw ): 36 x 35 x 19 mm

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 134 mm -Edition: gray cast iron -Intermediate dimension: 280 mm -Tip height: 250 mm -Drawing with the photos -Dimensions: 560/350/H440 mm -Weight: 36 kg

Specifications: Cutting performance Max. round bar diameter: 36 mm Max. thickness of the square bar: 30 mm Max. flat steel thickness: 200 mm Stroke rate: 45 1/min Weight, approx.: 1760 kg Dimensions (LxDxH), approx.: 2300 x 850 x 1550 mm For further technical data, see pictures. Equipment: Device for cutting : - Round rods - square rods -Strap iron -Angles - T-profiles - Corner profiles - for hole punching

Leveling shoe, machine foot, wedge foot, freestanding, 4 pieces FARRAT MACHINERY Ltd. Support height: 41- 51 mm Support height ( in middle position ): 46 mm Support surface ( top / bottom ): 200 x 95 mm / 200 x 95 mm width across flats: 22 / 12 mm Material: cast iron used, tested ! Dimensions ( one foot ): 215 x 95 x 46 mm Dimensions ( packaging ): 220 x 200 x 100 mm

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 100 mm -Tip height: 70 mm -Drawing with the photos -Dimensions: 340/300/H150 mm -Weight: 18 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 395 mm -Tip height: 240 mm -Drawings with the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 124 mm -Edition: gray cast iron -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 380/90/H400 mm -Weight: 14 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Edition: gray cast iron -Hole spacing: 160 mm -Tip height: 150 mm -Drawing with the photos -Number: 1x bezels available -Price: per piece -Dimensions: 430/230/H110 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 120 mm -Tip height: 115 mm -Drawing with the photos -Dimensions: 380/260/H65 mm -Weight: 8 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 420 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -max. passage: Ø 80 mm -Edition: gray cast iron -Hole spacing: 340 mm -Tip height: 150 mm -Dimensions: 390/70/H320 mm -Weight: 12 kg

Worm gear VEB Getriebefabrik Coswig ASUG 05 U4-50X80 TGL 45341 i = 80 input speed max: 1500 rpm input power: 0.0.0 23 KW input: shaft diameter: Ø 19 mm, shaft length: 30 mm, groove width: 5 mm flange: 140 x 140 / Ø 110 mm bolt circle diameter: Ø 130 mm, 4x threaded hole: M8 x 1.25 output: hollow diameter: Ø 25 mm, shaft length: 112 mm, groove width: 8 mm 2x gear foot: 118 x 82 mm hole spacing: 110 / 60 mm 4x threaded hole: M8 x 1.25, depth: 20 mm material (housing): Cast iron used, tested ! Dimensions: 230 x 140 x 190 mm

Thermocouple THERMOMETERWERK GERABERG, TWG Type 270 TGL 0-43710 Sensor: Ø 4 / 6 mm, Length: 30 / 6 mm Thermocouple: Fe-Konst ( Iron Constantan, Fe-CuNi ) Thread: 1/2 inch New ! Dimensions ( thermocouple ): 278 x 90 x 70 mm

Profile steel pliers, section iron grippers TAKRAF ZP 1 ( ZP1 ) load capacity: 1000 kg gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm

Centrifugal pump, low pressure centrifugal pump SCHMALENBERGER GmbH + Co. NBO 40-16/2 Q: 36 m3/h q: 1000 kg/m3 p: 2,2,2 bar y: 1.0 mm² Engine: ATB CA 112M/2B-11 5.5 kW 2860 rpm 400 / 690 V 3AC 50 / 60 Hz IP55 Material ( pump ): cast iron pump base: 175 x 225 mm hole spacing ( parallel to the shaft ): 140 mm hole spacing ( transverse to the shaft ): 190 mm hole diameter: Ø 12 x 16 mm ( slotted hole across the shaft ) Connection flange ( input ): Ø 185 / 120 mm, bolt circle: 145 mm, 4x bore: Ø 17.5 mm connection flange ( outlet ): Ø 150 / 84 mm, bolt circle: 110 mm, 4x bore: Ø 17.5 mm Inner connection diameter ( input / output ): 64 / 40 mm overhauled ! Dimensions: 510 x 240 x 285 mm

Clamp of iron, 100 pieces OBO BETTERMANN 2056/N ALU Article number: 1183 656 Clamping range: 28 - 34 mm Material: aluminium, plastic pressure tray Other quantities on request ! New ! Dimensions ( Bracket clamp ): 80 x 40 x 34 mm Dimensions ( Packaging ): 375 x 240 x 135 mm

Butterfly valve with pneumatic rotary actuator and limit switch END FITTINGS WA534014+ED621252+TM621407+PE080303 Butterfly valve: WA534014 DN250, PN16 Material ( housing ): Cast iron ( GGG-40 ) Material ( gasket ): EPDM Material ( washer ): Stainless steel ( 1.4408 ) Swivel actuator: ED621252 Control pressure: 6 - 8 bar solenoid valve: TM621407 Operating pressure: 1.5 - 8 bar Operating voltage: 230 V AC Limit switch: PE080303 Switching capacity: 250 V AC 3 A, 30 V DC 4 A IP67 New ! Dimensions: 810 x 395 x 340 mm

Strainer, filter, water filter PAGUS ND16NW20 PN16 DN20 Installation dimensions: 150 mm Flange: Ø 105 mm Material: cast iron (GG22) New ! Dimensions: 150 x 105 x 115 mm

Butterfly valve with pneumatic rotary actuator and limit switch END FITTINGS WA534012+ED620852+TM621407+PE080303 Butterfly valve: WA534012 DN150, PN16 Material ( housing ): Cast iron ( GG-25 ) Material ( gasket ): EPDM Material ( disc ): Stainless steel ( 1.4408 ) Swivel actuator: ED620852 Control pressure: 6 - 8 bar solenoid valve: TM621407 Operating pressure: 1.5 - 8 bar Operating voltage: 230 V AC limit switch: PE080303 Switching capacity: 250 V AC 3 A, 30 V DC 4 A IP67 flange on both sides with connection for DN150 pipe system and clamping ring, two-part, with sealing compound Installation length: 166 mm Material: stainless steel ( flange ), galvanized steel ( clamping ring ) New ! Dimensions: 362 x 285 x 230 mm

Strainers, filters, water filters FK ND16NW25 PN16 DN20 Installation dimensions: 160 mm Flange: Ø 115 mm Material: cast iron (GG25) New ! Dimensions: 160 x 115 x 140 mm

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

Strainers, filters, water filters SAMSON 25ND16 PN16 DN25 Installation dimensions: 160 mm Flange: Ø 115 mm Material: cast iron New ! Dimensions: 160 x 115 x 140 mm

bore capacity in steel (diameter): 55 mm arm length: 435 / 2000 mm workpiece height max.: 1500 mm spindle taper: MK 5 spindle turning speed range: 14 - 1800 U/min feeds: 0,025 - 1,25 mm/U quill stroke: 400 mm distance spindle/base plate: 665 / 1850 mm base plate surface area: 2120 x 1130 mm bore capacity in cast iron: 70 mm total power requirement: 5,7 kW weight of the machine ca.: 7 t Accessories: box table 1000 x 1000 x 490 mm, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert WJ-KS30S Oscillating edge grinding machine WEIBERT WJ-KS30S with polished veneer 400V 3 KW (4 HP) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Sanding belt back panel 1050x200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 HP) Can be switched on/off Machine table and guides made of GREY CAST IRON Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzle 120 mm Roll pull-out table widening Belt width 200 mm WJ-R00300 Optional at extra charge: Roll extension table widening WJ-R00101 Mitre stop WJ-R00102 Feeder console WJ-R00204 Driving device WJ-R00103

Strainer, filter, water filter PAGUS ND40NW25 PN40 DN25 Installation dimensions: 160 mm Flange: Ø 115 mm Material: cast iron New ! Dimensions: 160 x 115 x 165 mm

Strainers, filters, water filters KSB BOA-S PN16 DN25 Installation dimensions: 160 mm Flange: Ø 115 mm Material: Cast iron with spheroidal graphite ( GGG40.3 ) New ! Dimensions: 160 x 115 x 155 mm

Min/Max cutting length 230/1.000 mm. Max cutting width 1.250 mm. Max unwinder diameter 1.030 mm. n.2 unwinders available max reel weight per shaft 1.000 kg. nominal max cutting speed 130 m/min nominal max thickness 220-240 gr/sqm photocell for prints antistatic bar total dimensions LxW 2,2 x 4,8 mt. kg. 4.200, constructed in cast iron sound level under 75 Db power 16 kw Technical specs given by previous owner or constructor machine checked for good conditions, Construction year 2000, check on [this video](https://youtu.be/867xqXH-bb0), full reconditioning with addition of accessories, available on request

Getriebe, Winkelgetriebe ALPHA 1002.117011 Gear ratio ( i ): 2 input: coupling for shaft diameter: Ø 28 mm, shaft length: 45 mm flange: 100 x 100 mm / Ø 85 mm bolt circle diameter: Ø 96 mm, 4x threaded hole: M8 x 1.25 output: Shaft diameter: Ø 26 mm, shaft length: 21 mm gear: Ø 12 mm, length: 15 mm, teeth: 12 flange: 102 x 102 mm / Ø 81 mm material (housing): cast iron used, tested ! Dimensions: 210 x 102 x 150 mm

Getriebe, Winkelgetriebe ALPHA SPK 100-MF3-140-020-000 1002.117060 Gear ratio ( i ): 140 Input: coupling for shaft diameter: Ø 19 mm, shaft length: 38 mm flange: Ø 60 / 80 mm bolt circle diameter: Ø 70 mm, 4x threaded hole: M6 x 1.0, Depth: 15 mm Output: Shaft diameter: Ø 32 mm, Shaft length: 48 mm Shaft thread ( inside ): M12 x 1.75, Depth: 40 mm Flange: 102 x 102 mm / Ø 90 mm bolt circle diameter: Ø 120 mm, 4x bore: Ø 9.0 mm Material ( housing ): cast iron used, tested ! Dimensions: 280 x 190 x 105 mm

Worm gear GETRIEBEBAU NORD GmbH & Co. KG SK1SI50 i = 20 input: hollow shaft diameter: Ø 14 mm, shaft length: 35 mm, groove width: 5 mm flange: Ø 105 / 70 mm bolt circle diameter: Ø 85 mm, 2x threaded hole: M6 x 1.0, 4x bore: Ø 7 mm output: Shaft diameter: Ø 20 mm, shaft length: 33 mm, groove width: 6 mm flange: 113 x 90 mm hole spacing: 90 / 70 mm, 4x threaded hole: M6 x 1.0 material (housing): cast iron New ! Dimensions: 180 x 125 x 140 mm

Worm gear TH. ZÜRRER AG Type 2/1KG i = 100 input: coupling for shaft diameter: Ø 24 mm, shaft length: 30 mm flange: Ø 105 / 60 mm bolt circle diameter: Ø 85 mm, 4x bore: Ø 7 mm output: shaft diameter: Ø 19 mm, shaft length: 38 mm, groove width: 6 mm flange: Ø 120 / 80 mm bolt circle diameter: Ø 100 mm, 4x bore: Ø 7 mm gear foot: 90 x 90 mm hole spacing: 68 / 70 mm, 4x threaded hole: M6 x 1.0, depth: 15 mm material (housing): Cast iron New ! Dimensions: 195 x 185 x 165 mm

Commercial weight, casting weight, verifiable PAGUS 5.0 kg Diameter: Ø 95 mm Design: cylinder / button shape class: M3 Material: cast iron, painted used, tested ! Dimensions: 95 x 95 x 147 mm

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Commercial weight, casting weight, verifiable PAGUS 10.0 kg Diameter: Ø 118 mm Design: cylinder / button shape class: M3 Material: cast iron, painted used, tested ! Dimensions: 118 x 118 x 180 mm

Weibert WJ-D63 Thickness planer Planing width of 630mm 4-reversible knife shaft planing shaft D=125mm Knife shaft speed 5000 min/1 Thickness passage, min/max mm 3 to 300mm Motor planer shaft 9,5 KW 400V 50HZ Motor for electronic height adjustment of the thickness table with digital display Motor for feed 1.5 KW (2 HP) Max. chip removal of 8mm Passage height from 3-300mm Feed speed from 5 to 21 m/min. Suction nozzle of 160mm Machine table, planer shaft bearing block and table guide made of cast iron! External dimensions L=900 W=1120 H=1145 mm Total weight 1100kg G&WJ-D63 Optional spiral planing shaft G&WJ-D63-SPIRAL

Bearing block, counter bearing for milling spindle WMW Ø 70 mm x 150 mm Bearing diameter ( inside ): Ø 48 mm Bearing width: 65 mm Distance spindle center - upper edge dovetail: 150 mm Dovetail guide: 133 / 95 mm, height: 25 mm, width: 64 mm Bearing foot: 200 x 64 mm Material ( housing ): cast iron used, tested ! Dimensions: 235 x 65 x 210 mm

Bearing bracket, counter bearing for milling spindle WMW Ø 56 mm x 150 mm Bearing diameter ( inside ): Ø 56 mm distance spindle center - upper edge dovetail: 150 mm dovetail guide: 183 / 146 mm, height: 26 mm, width: 60 mm bearing foot: 270 x 60 mm Material ( housing ): Cast iron used, tested ! Dimensions: 310 x 90 x 220 mm

Clamping box, clamping cube, clamping angle, box angle PAGUS 1745 x 550 x 400 mm two clamping surfaces 1745 x 550 mm with two openings each 650 x 240 mm all threads M20 x 3.0 two clamping surfaces 1745 x 400 mm with two openings each 650 x 200 mm two side faces 550 x 400 mm with two openings each 240 x 200 mm Material: cast iron used, tested ! Dimensions: 1745 x 550 x 400 mm

Two-stage gearbox, gearbox, two-stage Getriebewerk Gotha SÜU11BA01 i1 = 17,43 i2 = 8.6 input speed max: 1742 rpm input power: 17 KW input: shaft diameter: Ø 45 mm, shaft length: 90 mm, groove width: 14 mm pulley: diameter: Ø 275 mm, Groove width: 10 mm, 8 grooves Output: Hollow shaft diameter: Ø 42 mm, with wedge hub profile 8 x 36 x 42 x 7 Flange: Ø 235 / 292 mm bolt circle diameter: Ø 260 mm, 8x threaded hole: M16 x 2.0, depth 25 mm Gear foot: 860 x 365 mm 8x Bore: Ø 21.5 mm Material ( housing ): Cast iron Replacement gearbox for plastic molding machine TRUSIOMA EI-45 ! used, tested ! Dimensions: 1050 x 680 x 440 mm

Bearing block, counter bearing for milling spindle WMW Ø 56 mm x 63 mm Bearing diameter ( inside ): Ø 56 mm bearing width: 56 mm distance spindle center - upper edge dovetail: 63 mm dovetail guide: 192 / 166 mm, height: 17 mm, width: 75 mm bearing foot: 250 x 75 mm Material ( housing ): cast iron used, tested ! Dimensions: 250 x 75 x 122 mm

Bearing block, counter bearing for milling spindle WMW Ø 56 mm x 63 mm Bearing diameter ( inside ): Ø 56 mm bearing width: 56 mm distance spindle center - upper edge dovetail: 63 mm dovetail guide: 192 / 166 mm, height: 17 mm, width: 75 mm bearing foot: 250 x 75 mm Material ( housing ): cast iron dovetail guide without pressure plate used, tested ! Dimensions: 250 x 75 x 118 mm

Bearing block, counter bearing for milling spindle WMW Ø 48 mm x 94 mm Bearing diameter ( inner ): Ø 48 mm bearing width: 66 mm distance spindle center - upper edge dovetail: 94 mm dovetail guide: 193 / 178 mm, height: 16.5 mm, width: 84 mm bearing foot: 250 x 84 mm Material ( housing ): cast iron used, tested ! Dimensions: 292 x 84 x 157 mm