ion used for sale

PPL Rolandmatic RCI 2 Densitometer only for read - not connected ith RCI Grafix powder spray Steel plate feeder and delivery Technotrans chiller unit overhauled in 2015 Ink temperature control IR dryer All ink fountains overhauled in 2016 Eltosch IR Dryer with 6 lamps Tresu coater Extended delivery APL Eltex antistatic Ionizer at the feeder Safety guards Clean system with water in suburbs of Anilox cylinder Very good condition Can be seen in production

Parker Domnick Hunter LCMS 12/2-E nitrogen generator is suitable for use with both ionization modes of LCMS instruments. The generator employs a pressure swing adsorption technique to deliver continuous streams of clean, dry nitrogen and air without the need for secondary purification. Flow rates are 12 L/min nitrogen and 2 L/min air. When operating the LC/MS in positive ionization mode, nitrogen is used for drying, auxiliary and nebulizing gas. The generator also produces clean dry air for use as nebulizing gas in the negative ionization mode. Features: • Suitable for nebulizing, auxiliary and drying gas • Fully regenerative, proven durability PSA technology • Phthalate-free • Integral oil-free compressor (optional) • Soundproofed compressor box • Digital Interface • CE, UL and CRN approved • Global manufacturing support B ...

Dishwasher / Quaker No. 1 (complete) - as in the picture: Manufacturer: TOPLINE Catalog number: E/473/O/2.12 Year of purchase: 2017 Quaker No. 2 (no bowl and rods) - to be completed or for spare parts Manufacturer: TOPLINE Catalog number: E/346/O/2.11 Year of purchase: 2012 The dishwasher performs a special washing process involving the action of hot steam from distilled water or nitric acid. Particularly useful in the laboratory using AAS, ICP and ICP-MS techniques for trace analysis. It allows you to wash glass, ceramic, Teflon (PTFE/PFA), quartz and borosilicate glass dishes. The heating element is a heater with a power of 1800 W. There is a tank on it, which is filled with water or nitric acid. The evaporating liquid is sent in the form of steam to the washed dishes through glass pipes. This steam can be reused after it has been liquefied. The entire device should be ...

Shaftless Unwind Monomatic Typ MD 107 (150 mm core diameter) FIFE side edge control max. roller diameter 1,070 mm Web tension control device Multiple breaking device Trimming station Cutting accuracy +/-0.2 mm Automatic angle adjustment Automatic sheet length adjustment without gear change Working width up to 1250 mm min. Working width 600 mm, cutting length from 550 to 1500 mm Materials from 60 g/sqm to 150 g/sqm (unwinder max. 120 g/m2) Ionisation device Waste ejection station Shingled delivery Belt delivery extended to the end of the stack Counting device Pile delivery with jogger max. mechanical output 300 m/min Cerutti embossing station - suitable for surface embossing (steel - paper 1 : 1.85) Embossing calender output max. 250 m/min

Gallus EM510S, 2005(10) Transaction Corona Web cleaning on both sides 10 Flexographic printing unit 2 Screen printing unit 10 ACTUAL UV Drying Systems 10 Hot air drying 10 Cooling Roller 2 Rotos Punches Longitudinal cutters Hot foils Cold foils Grid take-off Automatic register control Ionization Rail Free-standing take-up unit with double spindle Conveyor belt Printing Accessories Radiator

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Automatic system for packaging with heat-shrinkable plastic film. the aforementioned system consists of: 1) feeding belt complete with photocell and work surface 2) n.2 manual feeding modules with work surfaces 3) automatic wrapping machine with biconical wrapping machine 4) printed film group with central branding 5) hole fixture(European) 6) longitudinal perforator for facilitated opening 7) longitudinal welder with tilting wire 8) ionizing welder 9) shrinkage tunnel 10) belt with by-pass 11) collection belt 12) rotatable stacker Working hours 293 as per the attached photo.

The machine includes: o Foil module o Control of the printed film o Tunnel by 2 transport modules o Stacker o Longitudinal ionization system for shrink wrapping o Longitudinal seal system for packing in loose foil Machine after general reconditioning, purchased in 2003 from the manufacturer. Adapted to connect two M111 feeders (multifeeder) TECHNICAL PARAMETERS: Packing range: 1. Package type: Closed with a fold on the top side of the package 2. Min / Max length: 150-420mm 3. Min / Max width: 100-330mm 4. Min / Max height: 1-40mm 5. Min / Max package weight: 10-2500 g 6. Max capacity: 11,000 / h Foil: 1. Type: PE-PVC-PPO 2. Min / max thickness: 13-50 µ 3. Min / Max width: 250-750 mm 4. Number of turns: 1 pc. 5. Max coil diameter: 600 mm 6. Width of the welding machine: 320 mm Machine dimensions: 1. Length: 3260 mm 2. Width: 2100 mm 3. Height: 1700 + ...

Modular labeling machine 14 heads cold glue adhesive 8000 14 000 BPH This New modular labeling machine can be customized as needed Suitable for applying labels COLD GLUE AND ADHESIVES GLUE collar GLUE back U or L seal ADHESIVE front ADHESIVE back Bottles Containers CYLINDRICAL and SHAPED No labeling stations No 3 COLD GLUE groups N 2 adhesive groups 60 meters ON THE MODULAR TRAY Head diameter 960 mm Plates number 14 Min max label length 10 150 Min max label height 15 200 Container diameter height min max 30 80 mm Height 100 400 mm Max required speed 8 000 bph Basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5 Light column indicat ...

Paul Köster leak testing system for die-cast aluminium or cast aluminium housings in good condition. 2 city ions with workpiece carrier system for different tool holders. Connection option for compressed air and hydraulics directly on the workpiece carrier. Test container approx. 1600 x 2200 mm, depth approx. 900 mm. The system was used to test die-cast aluminium gear housings. Immediately available from stock. Special price free trucks loaded until the end of November 2023 on request.

Niton XRF equipment, model XL3t 980 GOOLD+. the spectrometer is practically new as it has been completely overhauled and recalibrated by the parent company in November 2023, changing the defective/worn parts which are under warranty for another six months or a year and which has the double metal/alloy -soil/rock setting. (each setting is worth 3000 euros) Overhauled by the manufacturer in November 2023, excellent conditions, comparable to a like new instrument. It is one of the most advanced models capable of reading even light metals such as aluminum, magnesium, silicon and precious metals. The equipment was purchased in Italy from the American company Thermo Fisher, to carry out tests which have now been completed. The spectrometer works perfectly. Reasons for sale: non-use. The equipment has a double configuration, both for soils and rocks and for alloys and metals. Th ...

Description: Various workshop equipment: .  , - N.1 Workbench with wooden top , 100 kg, 700x1000x1000 mm. - N.3 ionization units , 600 kg, ,2500x1200x2000 mm ( 3 ionization units each 1000 x 800x2000 mm, with tanks 200x1000 mm). - N.1 Electrical cabinet , 80 kg, 800x1200x1200 mm. - N.1 GALILEO ,ERGOTEST COMP 25 hardness tester, 100 kg, 600x250x1000 mm - , N.1 Chiller MTA TAE051 ,year 2001 , ,215 kg, ,1600x800x1600 mm (400 V, 50 Hz, 14 A, 7.8 kW, IP54, refrigerant  ,R407C, Maximum pressure 26 bar, maximum temperature 65°) - , N.1 FAC electric pallet truck , 800 kg, 1800x800x2000 mm (With battery charger) - N.2 workshop chest of drawers ,AMOS , 160 kg, 1400x750x1050 mm (each 80 kg, ,700x750x1050 mm) - N.1 MECATOOL workbench with drawers, 100 kg, 1400x800x1300 mm (including drawers) - N.1 Hydraulic equipment for handcrafted package  ...

Description: Finnish infrared sauna for 4 people, equipped with control panels, radio system, chromotherapy lights, and ionizer, power supply 230 volts maz 2700 watts, never used, packaged in its original packaging, assembled sauna size 1500 x 1500 x 1900 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,000 mm, weight approx.: 250 kg

Description: Finnish infrared sauna for 4 people, equipped with control panels, radio system, chromotherapy lights, and ionizer, power supply 230 volts max 2800 watts, never used, packaged in its original packaging, assembled sauna size 175x135x190 cm Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,000 mm, weight approx.: 250 kg

Description: Finnish infrared sauna for 4 people, equipped with control panels, radio system, chromotherapy lights, and ionizer, power supply 230 volts maz 2700 watts, never used, packaged in its original packaging, assembled sauna size 150 x 150 x 190 cm Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,000 mm, weight approx.: 250 kg

Description: Finnish infrared sauna for 2 people, equipped with control panels, radio system, chromotherapy lights, and ionizer, power supply 230 volts maz 1750 watts, never used, packaged in its original packaging, assembled sauna size 1200x1100x1900 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,000 mm, weight approx.: 250 kg

Description: Technical details: Volt 220 V, connected load 0.95 kW, additional information: ELBARON - ISI Industrieprodukte GmbH, type: EBR 2500 D EBR 2500 D, for extracting oil mist, emulsion mist (for emulsions with higher oil contents) and smoke. The ELBARON filter series was developed for use in machining with pure oil or for separating oil mist and smoke. The ionizer/collector cells, which we specially manufactured with high precision, in combination with the coordinated, very powerful high-voltage transformer and many other well thought-out details result in one of the most powerful electrostatic filter systems on the market. The ELBARON electrostatic filter system is an electrostatic filter system that has been tried and tested for years and is used 10,000 times worldwide. weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,300 mm

Second-hand wide belt sanding machine Make Heesemann Type MFA Impression not rebuilt - without guarantee Year of construction 2010 Technical specifications: Sanding width 1,350 mm - cross sanding unit with pressure lamellar belt system - combined longitudinal sanding unit with calibration roll - longitudinal sanding unit - structuring brushing unit - dust removal brushing unit - 3 pressure beams with computer-controlled selective pressure control system CSD Distance of the control rollers 21 mm Feed speed: 3 - 15 m/min. Working height constant 880 mm motorized adjustment to the workpiece thickness 3 - 150 mm 1 pressure roller Ø 50 mm swinging, in the infeed of the machine including workpiece oversize control Roller table in the infeed of the machine 1 industrial PC 10.4 with program memory for 100 programs 1 cross sanding unit Abrasive belt ...

CONTROLS   CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 180 mm   material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER   Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored

CONTROLS   CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 457 mm   grinding width max. - throughfeed grinding: 80 mm   material thickness max. - throughfeed grindin: 20 mm   grinding width max. - plunge cut grinding: 205 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 23 kW GRINDING SPINDLE 2   drive power: 23 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 240 mm/min   feeder velocity min.: 20 mm/min Scope of delivery: - Machine - emulsion tank new in 2012 Measuring control IONIC 17A

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 300 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 48 kW GRINDING SPINDLE 2   drive power: 48 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min   feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 5000 mm   total height: 3100 mm   total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment syst ...