ion used for sale

ionization controller ION SYSTEMS 4030 input: 100 / 230 VAC output: 24 VAC 30 VA Dimensions: 240 x 90 x 75 mm

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Multi-bag filter in 316 L stainless steel. Total filtering surface 5.76 m2 Equipped with 12 U bag support baskets in 316 perforated ion. Filter element 12 bags size 20 Volume 735 L Weight: 380 Kg Bag type: 12 PO 31 C Maximum recommended flow rate: 480 m3/h Inlet / outlet diameter : 250 mm Max temperature : 100?C Max pressure : 6 bar at 100?C Downstream depressurisation: tube with valve diameter 25 Downstream draining diameter: smooth tube diameter 40 Quick and easy opening Available units: x2. Each filter is sold with new bags.

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Metrohm 907 Titrando with 804 Ti Stand dynamic (DET); monotonous (MET), endpoint (SET) enzymatic and ph-Sat, as well as Karl Fischer (KF) Titrations,Measurement with ion-selective electrodes "iTrode",Dosing function with monitoring, Complies with FDA/21 CFR 4 MSD ports, USB Dosino 800; 10 ml ; 804 Ti Stand

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermo Dionex AS-AP Autosampler Dionex AS-AP Autosampler for Thermo Dionex ion chromatographs, min. sampler volume 10 μl, Var. Volume range 1-100 μl in 0.1 μl increments, opera. Temperature. 4-60 Celsius

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5000 mm high: 2185 mm weight of the machine ca.: 0,98 t dimensions: 1,72 x 0,8 x 2,2 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

00790A Complete R&D department for lithium-ion batteries On request, you will receive the machine lists

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metrohm 904 Titrando with 20 ml burette; High End Titrator Potentiometric Titrator, Dynam. (DET) Endpoint titration ,monotonous (MET) Titration.Ion Selective Electrode

Metrohm 904 Titrando with 815 XL Sample Processor Metrohm 904 Titrando with 20 ml burette and 815 robotic sample Processor and 805 Dosimat High End Titrator Potentiometric Titrator, Dynam. (DET) Endpoint titration ,monotonous (MET) Titration.Ion Selective Electrode

Description: Incl. accessories Scope of delivery: 1 x BLK360 G1 laser scanner 1 x BLK360 transport cover 1 x 3-legged tripod 2 x GEB212 Lithium-Ion battery 1 x GEV192-9 AC/DC adapter 1 x Car adapter cable, 1m 1 x BLK360 Quick Guide 1 x BLK360 USB documentation 1 x Carrying bag Approx. Onsite Dimension. (l x w x h): 300 x 300 x 1,000 mm, weight approx.: 20 kg

Description: Internal charger Internal charger built in li-ion battery pack Approx. Onsite Dimension. (l x w x h): 1,720 x 800 x 1,910 mm, weight approx.: 625 kg

Description: Unused 4th hydraulic function li-ion battery ) Approx. Onsite Dimension. (l x w x h): 1,800 x 1,060 x 2,030 mm, weight approx.: 2,400 kg

Description: The set includes the following items: - DCD996 Cordless 3-Speed Impact Drill - DCF894 Cordless Impact Wrench - DCS367 cordless reciprocating saw - DCS335 Cordless Jigsaw - DCH273 SDS-plus cordless combination hammer - DCG405 cordless angle grinder - DCS570 Cordless Circular Saw All motors brushless. - DCL050 rechargeable LED light - 4 powerful Li-Ion batteries, each with 5 Ah storage capacity and LED capacity display, can be used in all 18 volt cordless machines - System double quick charger for all XR batteries from 10.8 to 18 volts and Flexvolt XR batteries - Tough system consisting of Toughboxes DS 150, DS 300 and DS 400 as well as a trolley Number of tools 14 pcs. Battery 18 Volt / 5.0 Ah 4 pcs. Weight 70kg Dimensions L-W-H 650 x 500 x 1100 mm Approx. Onsite Dimension. (l x w x h): 650 x 500 x 1,100 mm, weight approx.: 70 kg

Offer consisting of: Horizon SmartStacker - SMST-F Smartstacker offline incl. Near-Line Feeder (08/2013) - SMST-FBR Barcode Control (08/2013) - SMST-EV Suction Funnel / Trim Coveyor (08/2013) -Accessories: - SMST ionization (06/2019) - SMST sensor set (7 pieces) (06/2019) - Format: max. 762x530mm; min. 279,4x330mm - Final format: max. 380x530mm; min. 100x105mm - Paper weight: 80 – 370 g/m² - Paper thickness: 0.1 – 0.381mm - Feeder: 800 mm (only offline and nearline necessary) - Destacking capacity: max. 254 mm - Panel processing: 1 – 28 blanks per B2 sheet - Speed: max. 4,600 sheets/h On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Material width until 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. With circulating air up to 120°C Dryer length 2 x approx. 2.2 m Thermo oil  ...

Material width max. 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. DRYER With circulating air up to 120°C Dryer length 2 x approx. 2.2  ...

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

Grinding width mm 1300 Grinding units total 6 Ribbons 4 Grinding rollers 1 Steel roller Segment grinding shoe electronic Paint intermediate grinding Vacuum table Table height constant Grinding belt length mm 2620 Further technical data Machine control HEESEMANN SMA PC11/40 Oscillation HEESEMANN CSD Turning direction reversal Ionizing device Workpiece thickness min mm 3 Pass-through height mm 80 Grinding shoes total 1 Segment width mm 16 Grinding brush unit Roller grinding brushes Cleaning brush dust removal machine Main motor kW 31 Band speed max m/s 24 Grinding belt swarm. adjustable infinitely variable Feed max m/min 28 Feed Stepless Blow-off device grinding belt Segment control electromagnetic Aggregates frequency-controlled 5 Cross-bands adjustable infinitely variable Aggregate configuration w-q-s-q-q-q-b Pressure lamella rim unit transverse  ...

Stacking-wening Rachner F 1000 PA/RS; werskstatt overhauled; Format 800x1280mm; Opening width 1330mm; Load capacity 1000kg; Blowing air; Vibrators; Side ruler; Ionization for blowing air. Pile turner Rachner F 1000 PA/RS; The size 800x1280mm; max.pile height 1330mm; carrying power 1000kg; airing; jogging; adjustable aligning gauge; ionisation for air.

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Distance between grinding wheels: 0 mm Grinding wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. work-piece height: 80 mm Grinding width: 40 mm Grinding wheel: outside diameter: 400 mm inside diameter: 250 mm Width / height: 50 mm Grinding wheel right side: Grinding wheel speeds: from: 134.5 rpm up to: 1435 rpm Peripheral speed: 24 m/s Grinding weehl left side: Rotation speed: 1150 rpm Peripheral speed: 3 - 30 m/s Feed range: 26 - 246 mm/s Voltage: 380 Volt Total installed power: 30 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 3300 mm Width: 2600 mm Height: 2300 mm Dimensions electric cabinet: Length: 1800 mm Width: 400 mm Height: 2000 mm Various accessories: Coolant system Wheel trueing attachment Measuring instrument: IONIC Workpiece loader Automatic loading and unloading uni ...

grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...

grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...

Technical data Work-piece diameter: 5 - 50 mm Max. work-piece height: 1 - 70 mm Arrangement: bilateral (above, below) Grinding wheel: outside diameter: 457 mm inside diameter: 76.2 mm Width / height: 75 mm Grinding wheel speeds: from: 251 rpm up to: 1254 rpm from: 6 - 30 m/s Speed of the work-piece driving plate: from: 21.8 rpm up to: 215 rpm Voltage: 380 Volt Grinding motor power: 2 x 30 kW Total installed power: 35 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2450 mm Width: 1100 mm Height: 2700 mm Various accessories: Measuring instrument: IONIC

Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm weig ...

1 dedusting with ring ionization with the option of installing the system on an existing transport. Cleaning perpendicular to the direction of flow of the automatic spray gun. With integrated electro-mechanical linear drive. 2 compressed air-operated, rotating blow nozzles move in an oscillating manner across the direction of the workpieces. The dedusting is provided with two side exhaust hoods through which the dust-free air is removed from the workpieces. 1 ring ionization for the elimination of static charges on the workpiece surfaces, attached to the oscillating / rotating Nozzle holder, including high-voltage power pack (not in EX) with voltage display and connection cable between ionizing bar and power pack The dust extraction system must be connected to a dust extraction system, min. 5,000 sqm / h. - Producer Venjakob - Year of construction 2009 - Working width 1300 mm - Feed sp ...

panel: Simatic Touch Panel; Control: S7; power supply: 230/400 V, 50 Hz; six-track entrance; shrinking tunnel; oil-based central lubrication of the tunnel and packer; ionization. Automatic felling folli. Support for both transparent and printed film. Automatic film bonding. Possibility of packing in one or two lanes depending on the size of the multi-pack format. Supported packaging: glass/PET/can. Operator panel menu: DE/PL/ENG. In our offer we have both right and left machines. Possibility of individual adjustment of formats to customer needs.

High voltage power supply for ionization filter ILT, INDUSTRIE- LUFTFILTERTECHNIK GmbH 5.5 / 11.0 kV input: 220 V AC 0.35 A 50 - 60 Hz output: 5.5 / 11.0 kV used, tested ! Dimensions: 200 x 145 x 80 mm

Overview For sale is a canning line for filling beer and other carbonated beverages, such as CSD or Sparkling Wine. The line is still assembled and can be inspected. As production volumes have increased, the line is too small with its current output and is being replacing it with a larger line. Standard 330ml and 440ml cans were produced on the line. Technical data  Output: 2.160 cans/ h at 440ml  Designed for standard 0.33l & 0.44l cans; retrofit to other formats possible  Machines Can pusher and rinser | Zomerdijk Engineering | 2021 Air rinser with ionized air | 2022 Can filler and seamer | Wild Goose | Evolution | 2019 5 Filling valves Checkweigher | Zomerdijk Engineering | 2022 Labeling machine | Framax  With color printing coder Buffer table | 2019 Semi-automatic packaging machine | Zomerdijk Engineering | 2021 Formats: 24s; 2x12s

OBTAINING LIQUIDITY - LEASING / HIRE-PURCHASE POSSIBLE ASK FOR AN INDIVIDUAL NON-BINDING OFFER! LEASING POSSIBLE FROM 674,-€ This is a NEW blast chiller / blast freezer from the manufacturer Irinox, type MF 100.1. This is a device for blast cooling/blast freezing hot food or unprocessed foods. A sturdy stainless steel entry ramp for the trolley. The system is an exhibit of a trade fair, still unused. The external refrigeration unit UC100 is still in its original packaging and is new. The cell may show minimal signs of use due to transport. The RRP for the MF 100.1 including the refrigeration unit is: € 51,592 net. + VAT. IMMEDIATELY AVAILABLE FROM STOCK ! OUR USED EQUIPMENT SERVICE FOR YOU: - 12 months warranty by Irinox - High-quality branded devices at fair prices - Professional and competent advice - before and after the purchase - Shipment or self-collection ...

Manufacturer: Heesemann , Type: LSM 8, Year: 1998, Control: Heesemann, Sanding width mm: 1300, Sanding hight mm: 1200, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Belt 1 shoe unit: Queraggregat, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : 13/17, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : regelbar, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Ionising: yes, Year :1998

Manufacturer: 5 Achs Leimspritzanlage, Type: Superfici, Year: 2000, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 10-100, Working widht max mm: 1300, Einlauband: 3500, Enststaubung: 2 Bürsten mit Ioniesierung, Spraying heads - total: 1, Zuluftfilterdecke: yes, Abdunstrockner mm : 7500, Düesentrockner 1 mm Temperatur: ca. 45, 5 axis machine: yes, Stainless steel design: yes, Spraying stations: 1, Working widht mm: 1500, Feeding speed m/min: 3-5, lichte Durchlaufhöhe mm: 100, Dry exhauster: yes, Transport system paper: yes, Lackierpistolen: 2, Materialförderpumpen: Krautzberger, Spraying heads - total: 1, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Year :2000

Manufacturer: Heesemann, Type: LSM 8, Year: 2003, Control: Steuerung der Anlage Neu, Monting of the machine: Quer / Längs / Bürste / Bürste, Sanding width mm: 1400, Sanding hight mm: 3 - 120, Number of sanding belts: 2, Sanding belt dimensions: 2.620 x 1450, Transverse sanding units: 1, Längsschleifaggregate: 1, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Belt 2 shoe unit: yes, Band 2 Schrägstellbar Grad : 15, Band 2 Innenliegendes Drucklamellenband : 0,5 - 12, Band 4 Schleifbandgeschwindigkeit m/s : 16, Belt 4 synchronous and reverse run: 2, Frequency control of belts: 5 - 25, Combi unit roller/shoe: 2,2, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: yes, Typ/Stückzahl: 5,5 kW, Vacuum table: 4,0 + 1,5 kW, Brushing unit: 250 + 150 mm, Ionising: 7.600, Year :2003

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003

Manufacturer: Heesemann EA 2, Type: EA 2, Year: 1995, Dust removal brush: yes, Brush type: Fibre, Diameter of brushes: 150, Compressed air cleaning: yes, Number of units: 2, Engine power - kW: 8, Units mounted upright: yes, Working width mm: 1350, Durchlasshöhe mm: 120, Feeding speed continous adjustable: yes, Ionisierung: yes, Wight approx. kg: 1.000, Required space L x W x H mm: 0900 x 2300 x 1500, Year :1995

Manufacturer: unbekannt, Type: Entstaubung, Year: ca.1990, Control: yes, Compressed air cleaning: doppelseitig, Number of units: 2, kW Leistung Motoren: ca.5, Units mounted upright: yes, Working width mm: 1300, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,5, Operating side: rechts, Ionising: eingebaut, Year :ca.1990

• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz

Manufacturer: Heesemann , Type: EA 2, Year: ca.1990, Control: hand, Dust removal brush: yes, Brush type: Fibre, Diameter of brushes: 150, Compressed air cleaning: oben und unten, Number of units: 3, Engine power - kW: Druckluftturbine ca. 4, Working width mm: 1300, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Ionising: yes, rotor jets: Flachstrahldüse, Year :ca.1990

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Manufacturer: Purete, Type: D1313, Year: neu, Control: HMI, Dust removal brush: yes, Brush type: Sisal, Diameter of brushes: 150, Number of units: 2, kW Leistung Motoren: 0,75, Number of rotations controlled: no, Units mounted upright: yes, Fast exchange device: yes, Working width mm: 1.320, Through running hight mm: 3 - 80, Vacuum belt: no, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5 - 25, kW-Vorschub: 0,75, Operating side: rechts, Electrical hight adjustment: yes, Ionising: no, rotor jets: no, Required space L x W x H mm: 3.000 x 1.850 x 1.700, Year :NEU

Paul Köster leak testing system for die-cast aluminium or cast aluminium housings in good condition. 2 city ions with workpiece carrier system for different tool holders. Connection option for compressed air and hydraulics directly on the workpiece carrier. Test container approx. 1600 x 2200 mm, depth approx. 900 mm. The system was used to test die-cast aluminium gear housings. Immediately available from stock.

VARIDAMP alcolor dampening CX equipment (additional equipment for cardboard until 1.2 mm) Ultrasonic double sheet control IR Dryer (Delivery) UV Dryer (Delivery) Logistics System Automatic format setting Automatic plate change Automatic washing device Chromed cylinders ALV 2 Double extension delivery Blower ionization on feeder CIPLink Ink profile presetting via CIP3 data ErgoTronic console with ColorTronic "19" TouchScreen Raise 630 mm complete ( feeder ,delivery and gallery) Grafix Hitronic S powder sprayer It's very well maintenance by KBA It's very good condition Available immediately

PPL Rolandmatic RCI 2 Densitometer only for read - not connected ith RCI Grafix powder spray Steel plate feeder and delivery Technotrans chiller unit overhauled in 2015 Ink temperature control IR dryer All ink fountains overhauled in 2016 Eltosch IR Dryer with 6 lamps Tresu coater Extended delivery APL Eltex antistatic Ionizer at the feeder Safety guards Clean system with water in suburbs of Anilox cylinder Very good condition Can be seen in production