ion exchange tank used for sale

Vahterus PSHE 5SH-320/1/1 Plate Heat Exchanger Never been installed before!

General SKU279X358 MakeAlfa Laval LocationBarneveld TypeIV Pressure Vacuum possiblecheck Working pressure shell6.5 Bar Vacuum possible shellcheck Working pressure tubes6.5 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface3 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface3 m2 Tube capacity16 l. Max. temperature130°C Shell connectionsDN40 Cover connectionsDN40 Information No.18892 Year of construction1991 Mounted on legscheck Floorspace0,80 x 0,65 m Total height1,50 mShell and tube heat exchangersAlfa LavalHeat exchangers > Shell and tube heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU390X1040 MakeAPI Schmidt-Bretten LocationBarneveld CEcheck TypeSigmawig ST30 TDL Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface7.6 m2 Size length995 mm Sizes width450 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface7.6 Capacity15,8 + 16,6 l. Number of platens24 Plate sizes450 x 995 mm ConnectionsDN100 Max. temperature5 / 250 °C Information No.PW-00520 Year of construction2014 Floorspace0,55x0,65 m Total height1,20 m Weight800 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKU390X1021 MakeSchmidt LocationBarneveld CEcheck TypeSigmawig ST 12 VDN Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Size length348.5 mm Sizes width197.5 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface8,7 m2 Capacity8,912 l. Number of platens64 Plate sizes197,5x348,5 mm ConnectionsDN50 Max. temperature20-180°C Information No.08V000422 Year of construction2008 Floorspace0,213x0,40 m Total height0,770 m Weight161 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please v ...

General SKU390X996 MakeWilhelm Deller LocationBarneveld TypeBEM 324/1350 Pressure Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes65 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,25 m² Tube capacity44 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1350 mm Max. temperature—10 / 330 °C Shell capacity24 + 8 Ltr. Shell diameter300 mm Shell length1900 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.38028/2 Year of construction2012 Mounted on framecheck Floorspace2,0 X 0,50 m Total height0,965 m Weight725 kgShell and tube heat exchangersWilhelm DellerHea ...

General SKU390X1007 MakeSchmidt-Bretten GmbH LocationBarneveld CEcheck TypeST12-PF-03884 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Size length1035 mm Sizes width335 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface8.7 m2 Capacity8,91/8,64 l. Number of platens64 ConnectionsDN50 Max. temperature250°C Information No.17V007820 Year of construction2017 Mounted on framecheck Floorspace0,335x0,686 m Total height1.035 m Weight332 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...

General SKU390X1003 MakeAPI Schmidt-Bretten LocationBarneveld CEcheck TypeSigmawig ST12-PF 1148 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 Plate heat exchangerscheck Heating surface8.7 m2 Capacity8,45 / 8,71 l. Number of platens64 ConnectionsDN50 Max. temperature0°C/+200°C Information No.08V000423 Year of construction2008 Floorspace0,35x0,35 m Total height0,70 m Weight160 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU390X1039 MakeSchmidt-Bretten GmbH LocationBarneveld CEcheck TypeST12-PF 2654 Pressure Working pressure25 Bar Main Features MaterialStainless steel Size length650 mm Sizes width300 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Plate heat exchangerscheck Capacity2,06 / 2,33 Ltr. Plate sizes300x600 mm ConnectionsDN50 Max. temperature5 / 250 °C Information No.07V002072 Year of construction2007 Floorspace0,36 x 0,25 m Total height0,80 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU390X1020 MakeAsdorfer Eisenwerk LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes55 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.2 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,2 m² Tube capacity46 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1348 mm Max. temperature—10 / 330 °C Shell capacity70 Ltr. Shell diameter324 mm Shell length2006 mm Wall thickness shell5 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.077713-1 Year of construction2008 Mounted on legscheck Floorspace2,15 x 0,45 m Total height1,00 m W ...

General SKU390X1013 MakeAsdorfer Eisenwerk LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes55 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.2 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,2 m² Tube capacity46 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1348 mm Max. temperature—10 / 330 °C Shell capacity70 Ltr. Shell diameter324 mm Shell length2006 mm Wall thickness shell5 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.077713-2 Year of construction2008 Mounted on legscheck Floorspace2,15 x 0,45 m Total height1,00 m W ...

General SKU390X997 LocationBarneveld CEcheck MakeTenez / Schmidt Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information TypeSigmawig ST12-PF-03882 No.12V002702 Floorspace0,34 x 0,45 m Total height0,78 m Weight250 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. P ...

General SKU390X1056 MakeTenez/ Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.17V007270 Year of construction2017 Floorspace0,335x0,45 m Total height0,79 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU390X1048 MakeTenez / Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.10V000138 Year of construction2010 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU390X1043 MakeTenez / Schmidt LocationBarneveld TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.12V002703 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...

General SKU390X1030 MakeTenez / Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.12V002703 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU390X1026 MakeTenez / Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.12V002704 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

General SKU390X1027 MakeTenez / Schmidt LocationBarneveld TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.10V000139 Year of construction2010 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU390X1032 MakeWilhelm Deller LocationBarneveld TypeBEM 324/1350 Pressure Working pressure shell18 Bar Vacuum possible shellcheck Working pressure tubes65 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface5,25 m² Tube capacity44 Ltr. Number of tubes:62 Tube diameter20 mm Tube length1350 mm Max. temperature—10 / 330 °C Shell capacity24 + 8 Ltr. Shell diameter300 mm Shell length1900 mm Max. temperature—10 / 330 °C Shell connectionsDN25 Cover connectionsDN80 Information No.38028/1 Year of construction2012 Mounted on framecheck Floorspace2,00 x 0,50 m Total height0,965 m Weight725 kgShell and tube heat exchangersWilhelm DellerH ...

General SKU292W1597 MakeTransitherm LocationBarneveld TypeAD2000 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface25m² Tube capacity235 l. Number of tubes:91 Tube diameter25 mm Tube length3700 mm Max. temperature0°C/+300°C Shell capacity210 l. Shell diameter400 mm Shell length3840 mm Max. temperature0°C/+300°C Shell with expansion jointcheck Shell connectionscheck Information No.11043 Year of construction2004 Mounted on legscheck Floorspace0,70 x 0,70 m Total height1,20 mShell and tube heat exchange ...

Air recovery system. 400V, 50Hz, 2,65 kW

Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar

The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 806-0-4 -Contents: Jacket space 50.7 l / Tube space 22.0 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2120/285/H305 mm -Weight: 146 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg

Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm -Weight: 16.8 kg

Make: SCHIESS Model: 16 DSC 150 Year of manufacture: 1989 Retrofit: CNC Siemens 840D (2006) Control: Siemens 840D CNC Machine type: Pallet exchange system for vertical lathes Condition: Very good – includes dedicated control cabinet and panel Quotation: Ex works Technical specifications: - 3× Table diameter (manual clamping jaws): 1,500 mm - Permissible load per table (with pallets): 2.5 t Included accessories: - Transfer rails - Transfer wagon - 3 pallet exchange stations - 1 pallet positioning station Auction-ID: A7-45257-3

Electric connection V - 230V. TESTED FOR FUNCTION There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-92

Alfa Laval plate heat exchanger, type: MK15-BWFGR, serial number: 30105-31165, year of construction: 2005, volume S1-S2: 133.0 liter, PS: -1/16.0 bar, TS: -10/50 °C, PT: 22.9 bar, volume S3-S4: 134.0 liter, PS: -1/16.0 bar, TS:-10/50 °C, PT: 22.9 bar, dimensions: 2100 mm x 650 mm x 1800 mm.

Steel skid with Alfa Laval plate heat exchanger, type: MK15-BWFDR, serial number: 30105-31166, year of construction: 2005, volume S1-S2: 132.0 liter, PS: -1/22.0 bar, TS: 0/100 °C, PT: 31.5 bar, volume S3-S4: 130.0 liter, PS: -1/16.0 bar, TS: 0/40 °C, PT: 22.9 bar, including GEA purger. Please notice that the 2 WITT kältemaschinenfabrik GmbH float regulators and the pipework are not included.

Consisting of 2x LU-VU SAV8S 2122 V/V high-performance condensers with 2 motors and 2 fans each, volume 44 l each, max. pressure 3 MPa each Auction-ID: A7-45702-40

Heating surface 230.5 m², test pressure 18 bar, operating temperature -40 to + 60 °C, with metal tray Auction-ID: A1-45682-34

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

Additional title: one-stage, Allowable pressure (wort & water): 10 bar, Allowable temperature (wort & water): 120 °C, Test pressure: 13 bar, Volume: 572 l, Length: 1,537 m, Weight: 3898 kg, Features: DN80 dairy coupling; 421 plates; fluid group 1

Flash pasteurizer for pasteurizing liquid food products. With pumps, preheater and control unit mounted on a common frame. Designed for a capacity of 1000 liters/hour., Additional title: Pasteurisation, Capacity: 1000 l/h, Compressed air: 6 bar for control air, Operation / Control: HMI on switch cabinet, Base construction: mounted on frame, Features: 2 x Alfa Laval plate heat exchangers, 2 x centrifugal pumps, pressure compensation tank, sight glass, temperature and pressure sensors, various other fittings and valves, HMI

This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

In stock on pallet, total dimensions approx. 1280x790x1600 mm Auction-ID: A1-45790-553

Earth tank, storage tank, steel tank - brand new for the storage of HEL with 50,000 litres capacity, according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. Dimensions: D = 2.50 m - L = approx. 10.80 m - weight approx. 9.3 tons. Incl. a walk-in dome shaft, multi-part, according to DIN 6626, height-adjustable from approx. 850 mm to 1,050 mm, as well as a walk-in cover, galvanized + tagwaterproof. Containers ex works, freely charged. Additional price for a navigable dome shaft according to DIN 6626 General: You will receive an invoice with VAT shown. The purchase is made on our general terms and conditions. Further tank systems (new and used) as well as rental systems are also on offer ...

Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT.  ...

Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Kat. No. 11-3231 (tank No. 402) in a very good condition description: outside: marbled – inside: 2B with Gaerspundanschluss with manhole in front 430 x 330 mms with probeer cock with clear expiry DN 65 with rest expiry with Einschweissflansch DN 65 with level indicator with strip and scale with leading holder with level ground with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3234 in very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole in front 430 x 330 mms with Sample Valve with clear expiry DN 65 with rest expiry with welding flange DN 65 with level indicator with strip and scale with leading holder with flat bottom with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3236 in very good condition cubically, very stable execution Description: outside: marbled – inside: 2B with fermenatation lock with manhole lid in front 430 x 330 mms with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level indicator with ladder rack with flat bottom with forwards pulled rest outlet Measurements: Width: 2,550 mm Depth: 5,000 mm Height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.