inverter used for sale

1 x large KSB pump + frequency inverters 45 kW Engine: KSB 45 kW 2965 U/min Circulation pump: Type ETANORM G 065-250 G0 138 sqm / h Year of construction 2009 Frequency inverter: Siemens 6SE6436-5BD31-8DA0 The pump was only 1 week in use, the flow rate was not sufficient for this project was replaced with larger pumps, the inverter was purchased to fit and has been Orginalbestandteil

CARVING MACHINE type MARIANI PL 8 I Volt. 380/50 with Inverter rotary device for the simultaneous rotation of the model and the pieces (3D) manual chuck of mandrins unit also to work with flat pieces Technical Data : n. 8 spindles distance betwen spindles mm. 400 rotation speed by Inverter . rpm min. 9600 / max. 17400 max. working length ( on rotation ) mm. 2100 net weigth kgs. 2500 overall dimension mm. 5000 x 3000 H=mm.1500

1 ALLIANCE sample high temperature jet dyeing machine, type Colora HT10 capacity 4 to 10 kg (according to the weight and composition of the fabrics)  year 1999 maximum dyeing temperature 140 ºC machine equipped with filter COMEUREG Microprog 40 dye cycle controller winch is ABB inverter controlled circulation pump is ABB inverter controlled with addition vat machine has worked very few hours and is in pristine condition

EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...

ABB ACS601-0040-3 Frequency Converter Manufacturer: ABB Type: Frequency Inverter Drive Model: ACS601-0040-3 Phases: 3 Power rating: 37 kW Input type: Digital, Analogue Maximum switching current: 76 A Minimum operating temperature: 0 °C Maximum operating temperature: +25 °C Height: 715 mm Breite: 306 mm Width: 360 mm Weight: 35 kg The frequency converter is new and has never been in operation. Documentation available. The frequency inverter can be inspected anytime upon prior arrangement.

1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...

GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse structure is intended for long-term insulation tests on test specimens of up to 6 nF capacity. Inverter for high-voltage test transformer · Internal sine wave generator: 50-200Hz. · Pulse width modulation 16-24kHz of the sine over full bridge. · Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW · Pulse current limit 110A (cut-off threshold) Pulse transformer – control · Control via full bridge · Full bridge power supply adjustable 0-1000V, 1.3A max. · Pulse current limit 100A (cut-off threshold). · Pulse width 20-120μs, nominal 94μs, adjustable · 2 selectable series inductors 150μH, 300μH to adjust the pulse width or rise times to load capacitance and voltage. · Pulse repetition rate 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable positive, negati ...

Cone cutter and profiling machine First working area - OPENING TABLE WITH TRANSPORTBAND Length: 2600 mm, adjustable speed, inverter controlled. Second work area: PRODUCTION AREA Group of eight with movable longitudinal slide and cone cutter unit, numerically controlled. MULTIPLE CONE CUTTER UNIT: Motor with 7.5 HP, 3000 rpm, inverter-controlled, Spindle diameter: 50 mm, length: 270 mm WORKPIECE RETURN

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 ...

Machine type TIG inverter welding system gas-cooled DC system Make Merkle Type MobiTIG 190 DC Connection voltage 1 x 230 volts Adjustment range 5 - 190 ampere Switch-on time 20% ED at 180 amperes 100% ED at 90 amperes Current adjustment infinitely variable max. weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare part box kpl. Equipped 18 month warranty 1 piece user manual New price €1,590.00 + VAT Price kpl. wi ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

Machine type Electrode inverter welding rectiveror with bi-power setup Make Merkle Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Adjustment range 20 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes 100% ED at 210 amperes Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter by built-in fan Version of portable assembly line Special accessories Bi-Power-Device Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 5 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with  ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...

Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1  ...

Machine type Electrode inverter welding rectiveror Make Merkle Type MobiARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 330 x 140 x 230 mm Weight 6 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece slag hammer heavy execution 1 piece steel wire brush 2-row 25 pie ...

Vacuum transport belt; State outdated; Length 2000mm; Working width 350mm; Speed adjustable; Forward or reverse running; new inverter; new conveyor belts; Stand allone. BVM vacuum transport band; condition rebuilt; lenght 2000mm; working width 350mm; speed adjustable; forward operation or reverse operation; new frequency inverter; new belts; stand allone machine.

Coating machine ensuring perfect and uniform coating of products. A conveyor belt transports the product, which is submerged by a 4-cascade curtain to ensure full coverage of the product. The bottom of the product is covered during passage through an immersion device. The speed of the conveyor belt can be adjusted by the frequency inverter. The correct amount of batter can be adjusted with a valve on the feed. A specially designed hygienic fan blows the excess beater over the top of the product while the excess dough at the bottom is removed by an additional scraper or bottom vent. The blowing speed is controlled by frequency inverter and can be adjusted according to the application. - Production of high-quality products and extended production runs - 4-layer curtain for full coverage - Adjustable treadmill speed via variable speed drive - The amount of batter can be adjusted wi ...

Part Number 6322 TECHNICAL DATA - max width of the workpiece 260mm - max height of the workpiece 160mm 6 spindles: 1) horizontal bottom 260mm 7,5kW 2) vertical right 160mm 7,5kW 3) vertical left 160mm 7.5kW - 3 spindles electrically adjustable front/rear 0.4kW 4) horizontal top 260mm 11kW - 4 spindles electrically adjustable up/down 0.4kW 5) horizontal bottom 260mm 7,5kW 6) universal 230mm 7,5kW - universal spindle electrically adjustable up/down - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 1,2,3,4,5 50mm - universal spindle diameter 40mm - from above 6 pulling, toothed, metal, torsional introductory shafts, including 2 double - from above 5 pulling leads shafts, rubber, smooth including 3 double - from the bottom from the side of the pressure on the inlet - from below 2 pulling, metal, toothe ...

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Machine Type Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Plant No. 04E 85048 Connection voltage 1 x 230 V Setting range 40 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 26 Ampere 3.25 rod electrodes, since 120 / 130 amps Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age approx. 10 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 16 qmm, 4 mr. long 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy versio ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Frequency inverter, 15KW, tested, max 2935 load hours, VLT FC-302P15KT5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 15 KW, VLT FC-302P15KT5E20H1XGXXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 29/25A - Output; 3x0-Vin, 0-590Hz, 32/27A - The frequency converters have been tested and only have between 1580 and max. 2935 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any def ...

Voltage: 230 V Brand: Helvi Manufacturer Part Number: 99805950 Particularities: Inverter power consumption: 3.5kVA Selected search filters: Inverter welding machine Welding process: MIG Welding current: 105A Frequency: 50/60Hz Schweissinverter: Galileo 127c Welding method: MIG MMA: PWM - IGBT Protection: IP22 Country and region of manufacture: Italy Insulation class: H EAN: Not applicable

Frequency inverter, 4 KW, tested, max. 606 load hours, VLT FC-302P4K0T5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 4 KW, VLT FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 9,0/7,4A, - Output; 3x0-Vin, 0-590Hz, 10/8,2A, - The frequency converters have been tested and only have between 105 and max. 606 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defe ...

Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...

Machine Type Electrode Inverter Welding Rectifier with PFC control STEL brand Type MAX 191 PFC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 115 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 420 x 160 x 280 mm Weight 9 kg Age 6 months Special accessories PFC control Condition workshop tested, new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 pair of welder gloves with cuff 1 piece slag hammer, heavy version 1 piece steel wire brush 2-row 20 pieces rod electrodes Böhler 2.5 x 350 mm 20 pieces rod ...

Used vacuum homogenising mixer type HYJRZ-50. Technical data: - Machine made of stainless steel, - Tank capacity: 65 L, - Working volume: 50 L (minimum 30 L), - Mixer: 1.5 kW 60 rpm, with inverter for speed control, - Homogeniser: constant speed 2.2 kW 2900 rpm, with inverter to regulate speed. - Power supply: 3 phases 380v/50hz, - Vacuum pump helps to pressurise the tank, - Lower 2 electric heaters are made of high quality stainless steel, tap water valve for heating the jacket, temperature control on the control panel, - Maximum heating temperature by water heating 100 °C , - Maximum heating temperature by oil heating 150 °C, - Minimum heating temperature is room temperature; - Heating power 6kw, - Cooling method: by cold water or chilled water through the central jacket. - The temperature sensor for temperature measurement is located in the control box. - Wei ...

Machine type electrode inverter welding rectifier Brand Böhler Type Terra 220 RC Supply voltage 3 x 400 volts, ± 15 % Setting range 3 – 220 amperes Duty cycle 30 % ED at 220 amps 60% ED at 170 amps 100% ED at 150 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 410 x 150 x 330 mm Weight 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 20 rod electrodes in 2.0 x 250 mm 20 rod electrodes in 2.5 x 350 mm 1 piece instruction manual Warranty 24 months fro ...

dimensions of saw-band: 3650x27x0,9 mm speed: 15-100 m/min vice: 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1.105 kg dimensions: 2700x2300x1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic- ...

Can filling line capacity: approx. 24,000 cph Filling Product: Soft drinks Can size: 330 ml and 500 ml standard cans Can Type: 211/202 consisting of: 1. Can depalletizer King with automatic can infeed system with Siemens S7 PLC including can table, pallet magazine, sheet removal system the depalletizer is fixed for the following pallet dimensions: 1.180 x 1.250 mm 2. Can rinser Transtech Hysek to rins new cans with filtered water infeed height: approx. 2,500 mm Outfeed Height: approx. 1,200 mm 3. Can filler and seamer KHS / Ferrum - Filler Innofill EMD 76 with 76 filling valves blocked with - Can seamer Ferrum type: F708G with 8 seaming stations the filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S7 including Danfoss frequency inverter including beer pressure regulating valve including CIP  ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

Blemo Frequency inverter ER23-1.1/4k - Instruction manual available - Price on request Blemo frequency inverter ER23-1.1/4k - instruction manual available - price on request

Motor control, drive inverter, frequency converter, inverter SEW MoviMot MM05C-503-00/0/P21A/RE1A/ALA4 8241155 bis 0,37 kW 380 - 500 V with ASI binary slave MLK11A MFP21D/MM03c-503-00/Z27F 1 8231214 used, tested ! Dimensions: 250 x 210 x 125 mm

Frequency converter, motor control, drive inverter, inverter AUTOMATION DIRECT GS1-21P0 W703111 1,6 kVA Input: 200 - 240 V 1AC / 3AC 9.7 / 5.1 A 50 / 60 Hz Output: 0 - 240 V 3AC 4.2 A 0 - 400 Hz used, tested ! Dimensions: 140 x 70 x 130 mm

x-travel: 10000 mm y-travel: 1600 mm workpiece height: 1900 mm distance between columns: 1859 mm table travel: 10000 mm table load: 20000 kg table speeds: 75 m/min dimension of workpiece: 1600 x 1900 x 10300 mm grinding wheel size: 630 x 180 mm spindle turning speed range: 960 U/min main drive motor: 22 kW table-size: 1600 x 10300 mm swival range +/-: 70 ° Control: Siemens 840D vertical stroke: 3000 mm vertical Stroke: 2200 mm weight of the machine ca.: 74 t dimensions of the machine ca.: - m Machine was retrofitted in 2008 with Siemens CNC, servo motor, drives and ball screw. Equipment of the machine: - CNC control Siemens 840D - Table feed speed continuous -- feed capacity: 75 kW -- motor speed: 1770 rpm -- maximum table speed without load: 75 m/min (AC motor with inverter, speed-dependent motor acceleration rate) -- speed with maximum continuous load: 50 m/min - Tangential grinding h ...

Machine Type: Electrode Inverter Welding Rectifier Make EP-Systems Type genera 200 Connection voltage 1 x 230 volts Setting range 8 – 200 amps Duty cycle 40 % d.c. at 180 amps 60% d.c. at 150 amps 100% d.c. at 120 amps Current adjustment infinitely variable max. weldable rod electrode 4 mm Ø Cooling inverter by built-in fan Design: portable assembly system, fuse 16 amps, dimensions: L x W x H: 310 x 120 x 220 mm, weight: 4 kg Age approx. 5 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy design 1 piece steel wire brush 2-row 25 rod electrodes 25 rod electrodes Warranty 12 months from the date of delivery Original price €750.00 + VAT :: Price cp ...