130,485 used machines on RESALE, but how to find them? Machine Search
Elmo G 200 Side Channel Compressor 8.5kW 2915rpm Unused Replacement Machine Weight approx. 180kg The cover on the engine at the rear is missing. unused replacement device. Was in stock, in case the first machine should fail. From insolvency
faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-46529-3054
Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).
Key data: 45 mm, 1350 , 298 U/min
Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available
Mateng Dynamic 220 – rear and side mulcher (new machine built in 2025) General data • Machine type: rear / side mulcher • Manufacturer: Mateng • Model: Dynamic 220 • Year of construction: 2025 • Working width: 2,200 mm • Weight: approx. 832 kg • Condition: New machine Technical equipment • Suitable for tractors of approx. 80–120 hp • Tilt angle: approx. -50° to +90° • Hydraulic side shift • Displacement: left 672 mm / right 1,528 mm • PTO: 540 rpm • CMR gearbox with freewheel • 4 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,047 rpm • Rotor Ø: 168 mm (with flail Ø 436 mm) • 24 mallets, staggered • Flail weight: approx. 1.37 kg • Hammer bolt M16 • Adjustable back-up roller Ø 168 mm • Two rows of counter blades for optimal shredding • Collision protection • Robust cons ...
pressure: 100 t throat: 350 mm stroke: 130 mm stroke of worktool slide: 3070 Hub/min ram adjustment: 100 mm ram surface: 500x300 mm table surface area: 1000x600 mm feed - rapid adjustment: total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Attention: Comes without battery! Auction-ID: A1-46680-3
Attention: Comes without battery! Auction-ID: A1-46680-4
Attention: Comes without battery! Auction-ID: A1-46680-8
Attention: Comes without battery! Auction-ID: A1-46680-6
Attention: Comes without battery! Auction-ID: A1-46680-7
Attention: Comes without battery! Auction-ID: A1-46680-2
This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.
Attention: Comes without battery! Auction-ID: A1-46680-5
Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm
used
HL 60 ton Capacity: 60 ton Passage between uprights: 410 mm Distance between table -- ram: 670 mm
used
HL 60 ton Capacity: 60 ton Passage between uprights: 410 mm Distance between table -- ram: 670 mm
The robust single-shaft shredder is equipped with 7 offset 40/40 mm indexable blades on the rotor The extremely robust design allows the shredding of data carriers such as hard drives, etc., files with metal components, wood-metal mixed material, metal-plastic material, recycling material, textile and carpet, rubber waste, horse manure, etc., sheep's wool, compost, etc. Technical data: 1 rotor with 7 offset indexable blades 40/40 mm 1 profiled counter blade 1 interchangeable screen perforation 20 mm round (can be adapted as required) Feed width 366 mm Rotor diameter 330 mm Motor 7.5 kW, 3x380 V, 50 Hz (can be made stronger) Speed approx. 580 rpm (a gearbox can be set up for low speeds) Machine new Information from Peter Ari Schär from MATEC Changes, errors, prior sale reserved ! Manufacturer: MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse ...
Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system: 1. Bottom 7.5kw 2.Rights 3.Left 11kw 4.Top 7.5kw 5.Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed adjustable via inverter Feed drive on gimbals Input table length 1970mm CE Certified
60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m
60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m
description: High quality control unit for pallet conveyors of a 50.000 bph filling line with several KHS control units For a total of frequency controlled drives, diverse protective switch drives /see photos for details) Switchboard with 2 pieces The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. ...
Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.
Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l
description: High quality control unit for pallet conveyors for a part of a 50.000 bph filling line For approx. 5 frequency controlled drives in a total, diverse protective switches (see pictures for details). The Danfoss inverters are overhauled (formated) and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offe ...
Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton
Table dimensions: 1000 x 800 mm Auction-ID: A7-46287-9
Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton
maximum number of results exceeded
please refine your search
300 € 
