intel used for sale

We sell 4 x Intel Xeon E5-2680v4 240GHz 2 x Intel Xeon E5-2690v3 2.60GHz 8 x Intel Xeon E5-2690v4 2.60GHz 8 x Intel Xeon E5-4660v4 2.20GHz 4 x Intel Xeon E7-4890v2 2.80GHz 32 x Intel Xeon E7-8890v3 2.50GHz 12 x Intel Xeon E7-8890v4 2.20GHz 6 x Intel Xeon Gold 6128 3.40GHz 16 x Intel Xeon Gold 6148 2.40GHz 8 x Intel Xeon Platinum 8280L 2.70GHz 8 x Intel Xeon Platinum 8260L 2.40GHz In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Su ...

We sell 1.) 8x Intel Xeon E5-2623 V4 9x Intel Xeon E5-2697 V4 6x Intel Xeon E5-2680 V4 4x Intel Xeon E5-2650 V3 2x Intel Xeon E5-1650 V3 Total count: 29 2.) 16 x E5-2620v3 Processors 6 x E5-2680v4 Processors Total count: 22 3.) 981 x Intel Xeon E5-2650v4 56 x Intel Xeon E5-2667v4 8 x Intel Xeon E5-8891v4 20 x Intel Xeon E5-2650v2 Total count: 1065 Total count of all processors: 1116 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SG ...

We sell 8x Intel Xeon E5-2623 V4 9x Intel Xeon E5-2697 V4 6x Intel Xeon E5-2680 V4 4x Intel Xeon E5-2650 V3 2x Intel Xeon E5-1650 V3 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have av ...

We sell 760 x Intel Gold 6148 CPUs 376 x Intel E5-2690 v4 CPUs In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from al ...

We sell 1.) 314 x Intel RMN-100HFA016 Omni Path Host Fabric Adapter 2.) 14 x Intel Switch MPN H95624-005-01 MSN USFU51150017 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available c ...

We sell 400 x Intel S2600 KP server/motherboards In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from all these manufac ...

Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 1 kg

Intelligent Gas Flow Meter, 5860S/BC1GA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 300 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Intelligent Gas Flow Meter, 5861S/BD1GA0CA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 100 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...

Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...

Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...

Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...

Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net

Ref. no.: 18138 Producer: DEMAG Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 3370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Portable CO2 Meter Haffmans i-DGM Intelligent - 2016 This Haffmans Portable CO2 Meter can be used for fast and accurate measuring of dissolved CO2 content in Beer and CSD. Measuring can be made directly in production or in laboratory purposes. Metering of CO2 beverages based on the internationally standardized method of Henry’s Law. Up to 10 different product types can be programmed into this device. Dissolved CO2 content can be transferred to PC with existing cable connection. Delivery includes Intelligent CO2 i-DGM device, protection bumper, service set with power supply, set of hoses and PC connecting cable. Technical characteristics Manufacturer Pentair Haffmans Manufacturing year 2016 Product model Portable i-DGM CO2 meter model OMG Varivent CO2 measuring range 2.0-10.0 g/litre CO2 accuracy +/- 0.05 g/litre Pressure range 0-10 bar(g) Weight 2.8 kg Certificati ...

Injection unit Screw diameter: 35 mm Closing unit Closing force : 1000 kN Distance between tie-bars: 520 x 520 mm Other Equipment : FULL ELECTRIC machine NC5 control Commissioning : 2010 Tonnage : 100

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...

SUMITOMO-DEMAG IntElect 210/580 Clamping force : 210 Tons Screw diameter : 35.0 mm Tie bar spacing (H) : 580.0 mm Tie bar spacing (V) : 580.0 mm Shot volume : 178.0 cm³ Shot weight : 158.0 g Pressure on material : 2800 bar Platen length : 880.0 mm Platen width : 850.0 mm Opening of the press : 1265.0 mm Mould size : 690 Length x width x height : 6260.0 mm × 1555.0 mm × 2071.0 mm Weight : 9800.0 kg Worked hours : 26615 hours Hours under power : 32244 hours State excellent At local norms : yes Status : under power max inj stroke -185 mm Operating hours – CPU-32143 ,Drives -26215 ,Heating -26500 Total cycle -16686388 Clamping Force 2100 KN Injection unit 500 Screw diameter 35 mm 400 V / 50 HZ Manufacture year –October 2010 Net Weight-9800 kg Injection and Clamp Drives renewed in 2015 The machine is in excellent condit ...

Comap InteliLite Mrs 16 & AMF9 Series Generator set Controller Available In Stock.

Biosan microplate washer. Scrubber purchased in 2017, efficient, not used, turned on once to check if it works. The Inteliwasher 3D-IW8 microplate washer is designed to wash a variety of standard 96-well microplates, split plates such as Flat Bottom, U-shaped and V-shaped FastFrame (rectangular well) microarrays. The washer is a fully programmable device to perform multi-stage work. It operates in a single point in a hole, two points in a hole or cyclically (in a circular or rectangular path), liquid dispensing mode, and washing and rinsing mode (in cycles of both functions). The fluid dosing system allows dosing each of the three independent channels for buffers separately. The 4-CHW recorder connected to the washer provides automatic control of the volume of washing solutions and beakers. Shows the volume of reagent in each bottle (in percent) and alerts you when the fluid is runn ...

Type of control: NC4 Closing force: 50 T Opening stroke: 260 mm Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini/maxi mould: 150/350 mm Max gap between trays: 610 mm Injection: Screw diameter: 30 mm Screw length: 20D cm3: 74 Bars: 1400 General: Motor power: 20 kW Heating power: 5 kw Closing weight: Injection weight: 3.3 tons Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Control type: NC4 Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Screw diameter: 30 mm cm3: 74 Bars: 1400 Motor power: 20 kw Heating power: 5 kw Cores: NO Bi metal

Control type: NC 5 Number of hours: 27,000 hours Closing Closing force: 350 T Opening stroke: 700 mm Between columns: 760 x 710 mm Tray dimensions: 1070 X 1015 mm Mini/maxi mold: 400/670mm Max distance between trays: 1370 mm Injection: Screw diameter: 60 mm Screw length: 20 D cm3: 2366 Bars: 890 General: Motor power: 55 kW Heating power: 23.1 kW Closing weight: 18 T Injection weight: Dimensions length: 6.5 m Width dimensions: 1.8 m Dimensions height: 2.3m Options: Cores: hydraulic predisposition 2 cores Robot interface: E67 Bi metal: YES Others: 4 blow guns, 2 Kisler mold pressure ports, laminar flow, 8 hot runners

Producer DEMAG Type IntElect 80-370-100 NC 4 All electric Year 2006 Clamping unit Clamping force 80 ton Opening stroke 850 mm Distance between tie bars 370 X 370 mm Mould height min. 200 mm Mould height max. 510 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 22 mm Injection volume 37 cm³ Shot weight 32 g Injection pressure 2580 bar Measurements and weight Dimensions 4,50 X 1,28 X 1,95 m Machine weight 4750 kg

Producer DEMAG Type IntElect 80-370-100 NC4 All electric Year 2006 Clamping unit Clamping force 80 ton Opening stroke 850 mm Distance between tie bars 370 X 370 mm Mould height min. 250 mm Mould height max. 510 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 22 mm Injection volume 37 cm³ Shot weight 32 g Injection pressure 2580 bar Measurements and weight Dimensions 4,50 X 1,28 X 1,95 m Machine weight 4750 kg

Producer DEMAG Type Demag IntElect 150/520-310 NC4 All electric Year 2005 Clamping unit Clamping force 150 ton Opening stroke 850 mm Distance between tie bars 520 X 520 mm Mould height min. 275 mm Injection unit Screw diameter 30 mm Injection volume 64 cm³ Shot weight 58 g Injection pressure 2500 bar Measurements and weight Dimensions 5,35 X 1,48 X 2,28 m Machine weight 6400 kg

Producer DEMAG Type intElect 50/330-100 NC4 All electric Year 2009 Clamping unit Clamping force 50 ton Opening stroke 260 mm Distance between tie bars 330 x 330 mm Mould height min. 150 mm Mould height max. 350 mm Platen size (h x v) 500 x 490 mm Injection unit Screw diameter 25 mm Injection volume 51 cm³ Shot weight 46 g Injection pressure 2005 bar Measurements and weight Dimensions 3,97 x 1,19 x 2,21 m Machine weight 3300 kg Additional Information: 1 Anguß-Picker Fa. Wittmann W702 year 2008

Injection unit Screw diameter: 35 mm Calculated injection volume: 154 cm3 Length/diameter ratio: 20 L/D Max. injection rate: cm3/s Material pressure: 2790 bar Closing unit Closing force : 1300 kN Distance between tie-bars: 520 x 520 mm Platen dimensions: 725 x 725 mm General Total installed power: 9.4 kW Other Equipment : Process INTELECT 2 FULL ELECTRIC 2 Hydraulic cores 1 AIR core EUROMAP 67 Commissioning: 2019 Hours: 3300 h Tonnage: 130

Key data: 500 kN

Sumitomo Demag IntElekt 50/370-80 / Electric Machine Year of construction: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Size of clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Air Valve x 4 Control with hot runners Injection unit hardened - Bimetal Central lubrication It is possible to change the screw diameter Metrics: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

Mini Tower PC Assembled- Intel i7 8core 3.6 GHZ, 64gb Ram, 256Gb disk, Nvidia GeForce RTX 2080 Mini Tower PC Assembled- Intel iS 4core 3.1Ghz, 8gb Ram, 128gB, Intel HD Graphics 4600 Mini Tower PC Assembled- Intel i7 4core 3.6 GHZ, 64gb Ram, 256Gb disk, Nvidia GeForce RTX 2080 Dell XPS 13.3" Laptop - S/N 7RRRYM2 - 64bit - 8mb cache -16gb Ram - SSD 512gb Lenovo Ultrabook Thinkpad 14" X1 Carbon- s/n PF-122LSC Wacom intuos pro medium PTH-651 Graphics Tablet Wacom intuos pro large PTH-851 Graphics Tablet

Type of imager Image quality Engine control External drum design Cast granite machine base High power Fiber Laser source, Laser class 1 CDI. Screen rulings up to 250 lpi, depending on imaging resolution Halftone: 1 - 99 % HighRes Optics: fully variable from 2540 to 4000 ppi on job to job base Grapholas Touch Exposer on Intel PC with Windows 7 Automatic mering via Automation Engine” in combination with Flexo Plate Making Module for AE or standlone Merger (requires Intel PC with Windows 7 ) Input file format: LEN or TIFF, compatible with all CDI family members RIP and screening options Esko software Plates Plate sizes Machine dimensions Installation requirements - Optional Imaging Engine - Industry standart PostScript/PDF RIP - Quality screening optimized for flexo (Circular, Double Circular dots) included in the RIP - HD Flexo Screening option for the finest print quali ...

We sell 576 x 16GB (1536GB) DDR3 1600MHz RDIMM PC3-12800 Dual Rank x4 1.35V 88 x 32GB (1408GB) DDR3 1600MHz LRDIMM PC3-12800 Quad Rank x4 1.35V 192 x 32GB (1536GB) DDR4 2133/2400MHz RDIMM 2Rx4 1.2V 144 x 32GB (1536GB) DDR4 2400MHz RDIMM PC4-19200 Dual Rank x4 1.2V (Total count of 32GB modules: 424) 168 x 64GB (1536GB) DDR4 2400MHz LRDIMM PC4-19200 Quad Rank x4 1.2V 64 x 64GB (4096GB) DDR4 2133/2400MHz LRDIMM 4Rx4 1.2V 16 x 64GB (1024GB) DDR4 2666MHz TSV-RDIMM PC4-21300 Quad Rank x4 1.2V 48 x 64GB (1536GB) DDR4 2933MHz RDIMM 2Rx4 1.2V 128 x 64GB (1536GB) DDR4 2666MHz TSV-RDIMM Quad Rank x4 1.2V (Total count of 64GB modules: 424) 48 x 125GB (3072GB) DDR4 2933MHz LRDIMM 4Rx4 1.2V 48 x 128GB (3072GB) Intel Optane Persistent Memory 2666MHz 48 x 256GB (6144GB) Intel Optane Persistent Memory 2666MHz Total count of all memory modules: 1568 In most cases, the enti ...

Bundle consisting of Artec Eva 3D scanner and Artec Spider 3D scanner in very good condition with power supply, USB cable and carrying case. A license for the Artec Studio software must be purchased from Artec at a price of around EUR 2,000. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, lightsource: Flash bulb (no laser), color resolution: 1.3 mp, Light source: Flash bulb (no laser), Lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rat ...

Artec Spider 3D scanner in very good condition with accessories (power supply, USB cable). A license for the Artec-Studio software must be purchased through Artec. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up  ...

4 up thermal CTP Kodak Magnus 400 p. 4up CTP IALDA laser head 2019 (no thermal head) Year: 2008 (Refurbished by Kodak in 2009) Plate counter reading 27,371 Current error: Plates are loaded incorrectly / registration is incorrect Incl. dongle, Prinergy Evo RIP, Windows XP computer Minimum panel format: 311 x 228 mm Maximum panel format 680x750 mm approx. 16 plates / h + Kodak Magnus 400 Conveyor Load manually Calculator including KODAK Preps HP xw4600 Workstation Windows XP Professional 2002 Intel® Core ™ 2 Duo CPU E8500 3.16 GHz 3.48 GB of RAM Kodak Preps 5.3 Kodak Mercury MK6 850 Year: 2005 (general overhaul 03/2009 by Kuhnen Media GmbH) Plate count: 22,977 3x 20L KODAK 400 xLo Plate Solution developer solution Maximum panel width: 850 mm Minimum panel length : 620 mm with middle developer rollers 320 mm (available) Plate thickness: 0.152 - 0.5 mm Wa ...

Bizerba PC Scale Type: KH 100 Bon-/Linerless printer or 3" label printer Intel Celeron Processor Up to 2.24 GHz Touchscreen Windows 10 2x USB port 1x LAN connection 1x COM connection Net price ex stock

Bizerba PC Scale Type: KH 100 Bon-/Linerless printer or 3" label printer Intel Celeron Processor Up to 2.24 GHz Touchscreen Windows 10 2x USB port 1x LAN connection 1x COM connection Net price ex stock.

Bizerba PC Scale Type: KH 800 Bon-/Linerless printer or 3" label printer Intel Celeron Processor Up to 2.24 GHz Touchscreen Windows 10 with LAN connection and USB connection Net price ex stock.

Bizerba PC Scale Type: KH 800 Bon-/Linerless printer or 3" label printer Intel Celeron Processor Up to 2.24 GHz Touchscreen Windows 10 with LAN connection and USB connection Net price ex stock.

Bizerba PC Scale Type: KH 800 Bon-/Linerless printer or 3" label printer Intel Celeron Processor Up to 2.24 GHz Touchscreen Windows 10 with LAN connection and USB connection Net price ex stock.

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: HP Indigo 7500 Printing press incl. chiller, included in the maintenance contract - First installation 2016 - 7-color license - Special Effects License (e.g. Raised Print, Mold Print) - Automatic Alert Agent License - One-Shot Technology License - Heavy-Substrate Drawer - Washing table HP EliteOne 800 Workstation - Support for touch input with 10 touch points - Intel Core i5 2.9 Ghz- 4 GB RAM- Windows 10 Pro- incl. table DFE: - HP ProLiant DL380p, Gen8 (!) - In ongoing production and maintenance contract On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

-Exhibition machine- Machining length 3,200 mm (without additional support of the workpiece) Vertical machining center for drilling, milling and grooves. Highest flexibility and universal range of application with the smallest space requirement. Modern industrial design built from quality components with an optimal field of view of machining and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides Ball screws in X, Y and Z direction for precise positioning and for perfectly fitting workpieces. Workpiece-friendly clamping system by means of vacuum suction cup (2 x 80/80 and 2 x 80/40 mm) with automatic suction cup positioning. Extremely short set-up times. Workpiece fixation on the back allows machining of the entire circumference including horizontal drilling without additional reclamping (up to workpiece lengths of 1,500 mm). This guara ...

axis stroke (X,Y,Z): unbegrenzt, 1000, 60 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 6 St. milling motor: 4,5 kW CNC-Bearbeitungszentrum zum HAMMER-PREIS! MASTERWOOD TF 100 2.0 Partnership Edition Ausstattung: -------------------------------------- - Bohrkopf mit 16 Bohrern für 5-seitige Bearbeitung - Nutsägeaggregat - Fräsaggregat mit 6-fach-Werkzeugwechsler - inkl. Nutsägeblatt, 2 Diamantfräser, 1 WPL-Schlichtfräser - Vorrüstung für CLAMEX- und Türenpaket - 2 klappbare Rollenbahnen - programmgesteuerte Zentralschmierung -------------------------------------- AKTIONSPREIS 44.990,00 Euro (zzgl. MwSt.)ab Werk -------------------------------------- Fracht, Aufstellung, Einweisung innerhalb Deutschland inklusive 8-stündiger Schulung individuell und vor Ort AKTIONSPREIS 3.000,00 Euro (zzgl. MwSt., Preis bisher 2.582,00 Euro) Die Optionen der Par ...