inspection used for sale

An optical inspection machine Bizerba for label and seal inspection in packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions X/Y/Z: approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Inspektor Linatronic along with contour detecion module: • Type: Krones Linatronic K735 • Manufacture year: 2012 • Capacity: max. 60 000 bottles/h. • Direction of operation: from left to right Possible detection: • Residual liquid (infrared) • Double check of residual sodium (high frequency) • Inspection of neck damage • Side wall control modules - 4 modules • Rejection of damaged bottles • Separate rejection of dirty bottles • Bottle contour detection • Bottle color detection • Separate rejection of bottle with wrong contour or color The Inspection unit contains the conveyor which separates bottles before the entry to the Inspector and the Ejector table after. Total lenght of the Unit: 11300 mm

Brevetti K32-400 automatic inspection machine for cartridges, inspection of bubbles, fill level, cap defects, stopper defect/position, particles (with three inspection units), with corresponding format parts suitable for containers with a diameter of 8 to 52 mm and a height of up to 150 mm, includes format part for catridges Ø8.65x63 mm and Ø8.65x76 mm, electrics 400V, 50/60Hz, 3Ph, power 8 kW, compressed air 5 bar, height of infeed/outfeed 900 +/- 25 mm, machine floor space approx. 2400 x 2600 mm, machine height approx. 2440 mm, machine net weight approx. 2800 kg, capacity up to 400 cartidges per minute

An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

• Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions • Maximum output 12,000 ampoules/hour • For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set • Automatic syringe feed from upstream machine via screw conveyor • Syringe turning station for foreign objects and liquid residues in the needle • Rotary device for foreign object detection • 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station • 1 inspection station for flange damage and missing pistons • 1 inspection stat ...

MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Machine for the inspection of vials, ampoules and other components for particulate particles. Optimized for small workstations, laboratories or production lines, suitable for integration in GMP-controlled environment. Stainless steel construction. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS Enclosed hood with viewing window and adjustable lighting system Controls on front panel: power switch, lighting selector, intensity dial Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION Voltage: 115 V AC (standard US mains); Current: 5 A; Frequency: 60 Hz; Phase: single phase  ...

New machines, delivered in 2024 and 2025, not connected and not commissioned, are for sale., Homegrown organic produce should be processed. The production has a handcrafted feel. Juices, jams, spreads, salads, herbs, dried, and flash-frozen products can be produced., Among other things, a jar filling line equipped for three jar formats with a capacity of approximately 2,500 jars per hour is for sale. It also includes cooking equipment for jams, a pasteurization tank for juices, washing systems for fruit, vegetables, and salads, two rack dryers, a blast freezer, and much more., Here you can find the machine list:, .florin-machines/epona, A short overview list in Excel, the general terms and conditions, and the bid sheet for submitting your bids can be downloaded using the corresponding links below.

Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible.

Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.

This machine is used for inline inspection of bottles or containers with regard to fill level, closure and labeling.

Miho David 2001 Empty Control System automatically inspects glass bottles for foreign bodies, dirt, liquid residues and bottle defects before filling. Only flawless bottles are filled. Robust design and reliable performance increase process reliability and product quality in beverage production lines. - Up to 25,000 bottles/hour - from left to right

An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible.

Two Polymaster sample display machines for the film industry are available. Working width: 1900mm/2100mm, roll weight: 100kg, machine dimensions X/Y/Z: approx. 2550mm/1050mm/2000mm. Documentation available. An on site inspection is possible.

Nagel inspector, for bottom, mouth and residual liquid control, set up for 0.33 l longneck bottle (other formats possible), completely overhauled in 2025, available at short notice due to cancelled order.

Description The Krones Checkmat 731 (built in 2016) is a high-performance inspection system for quality control in beverage filling lines. The machine reliably checks the fill level, closure, label presence and other quality-relevant parameters. Thanks to its seamless integration into Krones' high-speed lines, it ensures consistent product quality and efficient rejection of defective containers. Specifications Manufacturer: Krones Model No.: Checkmat 731 Year 2016 Condition Used Stock number 103822 Current type and system AC 1/N/PE Voltage 230 V Frequency 50

Manufacturer: Mahlo Model: Webpro M Year of Manufacture:2021 Power supply: 230 V AC Electrical connection: 1L / N / PE Frequency: 50/60 Hz EMC interference class: G Protection class: IP43 Product: Inline quality measurement system QUALISCAN QMS-12 by Mahlo Function: Inline system for continuous measurement of thickness and basis weight during production. Sensors are mounted on a traversing frame and move left to right across the material to measure over the full production width and length. Measured parameters: Thickness Basis weight Additional parameters possible depending on configuration Measurement principles: Thickness measurement by laser triangulation, double-sided measurement of top and bottom surfaces Measurement range: 0–100 mm Reproducibility: ±25–50 µm Basis weight measurement by X-ray transmission X-ray intensity is reduced according to material mas ...

Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024.

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

Fully automatic syringe inspection system for 1 ml long syringes with liquid contents. Number of camera stations in the carousel: 9 units. Output: up to 24,000 syringes/hour. The line is equipped with: Denester INOVA/ OPTIMA, type SH 250, Renester INOVA/ OPTIMA, type TR 240, labeller INOVA/ OPTIMA, type ESK 2411 and a wide range of accessories.

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

OPTREL PWL, SEMI-AUTOMATIC INSPECTION MACHINE Semi-automatic inspection machine for small volumes and products requiring inspection. Particles and imperfections are visually checked by an operator with a high-magnification lens and a brightness-adjusted setup. Built in 2003. CHARACTERISTICS Wide product range (ampoules, vials and cartridges for injectable liquid products) Change parts optimized for quick change over and small footprint (size: 2250 x 1750 x 2100 mm) Output: 100 units/min Working height: 900 ± 25 mm

An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: No, Total length: 1,800mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Mains connection: 230 VAC, 50Hz, Documentation: 1 x German paper

Bosch (Eisai) AIM 596 inspection machine suitable for ampoules/vials with a diameter of up to 30.0 mm and a height of up to 130 mm, capacity up to 16,000 ampoules/vials per hour, machine net weight approx. 2700 kg with Seidenader DAR 350RL external washing and drying machine for ampoules/vials, etc., capacity up to up to 21,000 ampoules/vials per hour., machine net weight approx. 700 kg, includes format parts for ampoules 1 + 2 ml. (Ø10.75 mm), 3 ml. (Ø12.75 mm), 5 ml. (Ø14.75) and 10 ml. (Ø17.75 mm) and vials 20 ml

Seidenader SI-40 automatic inspection machine for vials, ampoules, etc., with corresponding format parts suitable for objects with a diameter of up to 52 mm, includes format parts for vials 20 ml & 100 ml and ampoules 1 + 2 ml. (Ø10.75 mm) und 3 ml. (Ø12.75 mm), electrics 3X400V/50Hz/3Ph, power 6.0 kW, capacity up to 24,000 objects/min.

The ND56X is designed for R&D; enterprises, laboratories, and quality inspection rooms. It is a fully automatic defect inspection system suitable for a wide range electronic components and precision parts. CE certified and compliant with SEMI S2/S8 semiconductor industry specifications. X-Ray Tube Source Specifications - Type: sealed micro-focus X-ray tube - Voltage range: 40 to 90 kV - Current range: 10 to 200 uA - Maximum output power: 8 W - Micro focus spot size: 15 um Flat Panel Detector Specifications - Type: TFT Industrial Dynamic Flat Panel Detector (FPD) - Pixel matrix: 768x768 to 1536x1536 - Field of view: 65x65 to 130x130 mm - Resolution: 5.8 Lp/mm - Frame rate (1x1): 20 to 40 fps - A/D conversion: 16 bits Key Features and Functions - Automatic defect detection: size, area, broken wire, bridging and more - Customizable software algorithms: Y/N, crack, broken wir ...

Bosch (Eisai) AIM 296 inspection machine suitable for ampoules/vials with a diameter of up to 17.5 mm and a height of up to 130 mm, capacity up to 24,000 ampoules/vials per hour, machine net weight approx. 2700 kg, with Seidenader DAR 350RL external washing and drying machine for ampoules/vials, etc., capacity up to up to 21,000 ampoules/vials per hour., machine net weight approx. 700 kg, includes format parts for ampoules 1 + 2 ml. (Ø10.75 mm), 3 ml. (Ø12.75 mm), 5 ml. (Ø14.75) and 10 ml. (Ø17.75 mm)

A low-tension fabric inspection and shearing machine Unglaub with newly covered transport rollers is available. Working width: 1900mm, material thickness range: 0.2mm-3mm, max. inspection material speed: 40m/min, inspection material groups: I-IV. Documentation available. An on-site inspection is possible.

A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement.

Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high vo ...

Video inspections for battery-powered sewers, equipped with battery, LCD screen, 5-meter cable, never used Overall dimensions: 800 x 500 x 400 mm Weight: 20 kg Auction-ID: A7-48339-43

Video inspections for battery-powered sewers equipped with battery, LCD screen, 5 meter cable, never used Overall dimensions: 800 x 500 x 400 mm Weight: 20 kg Auction-ID: A7-48339-284

Video inspections for battery-powered sewers equipped with battery, LCD screen, 5 meter cable, never used Overall dimensions: 800 x 500 x 400 mm Weight: 20 kg Auction-ID: A7-48339-173

General description Industrial metrology and quality control setup including motorized height measuring system BAGREAL AG hm-300, surface plate, and extensive precision measuring instruments. Suitable for dimensional inspection and calibration in machining or production environments. Technical details Type: Metrology equipment set with height measuring system Main unit: BAGREAL AG hm-300 (Switzerland) Configuration: Motorized vertical measuring column mounted on precision base plate Measuring range: Approx. up to 300 mm Operation: Electric motorized height adjustment Includes: - External micrometers (various ranges) - Dial indicators and comparators - Bore gauges / internal measuring tools - Gauge pin sets (multiple trays) - Slip gauges / gauge block sets - Radius gauges and specialized comparators - V-blocks, fixtures, and measuring holders Base: Granite surface plate ...

The PI-LID inspection system, including the camera used, but it doesn´t contain specific pricing information. To find the price of the "Prisma CCD color line camera" or other components (like the LED lighting system or image processing computer), you would need to consult suppliers or manufacturers specializing in industrial inspection cameras. You can search for similar CCD line cameras on s like: - Vision Components - Basler - Teledyne DALSA - Edmund Optics The PI-LID (Print Inspection Lid) system is a high-speed vision inspection system designed for the print quality inspection of lids, cans, cups, and tubes. It is typically integrated into printing machines and helps ensure that printed materials on these surfaces meet quality standards. Here’s a breakdown of the key features and how it works: 1. Purpose and Usage - Application: It inspects the print quality on lids or cylin ...

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control, Additional title: Bottle inspection machine, Capacity: 8000 bottles/h, Voltage: 400 Volt, Frequency: 50/60 Hertz, Compressed air: min. 5 bar, Length: 2030 cm, Width: 950 cm, Height: 1830+conveyor height cm, Weight: 1600 kg, Running direction: from right to left, Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors, Position: free standing, Periphery: Synchronised container transport segments after the inspector

Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically trig ...

Wheel Formula 4x2 Auction-ID: A1-48520-6

Wheel Formula 4x2 Auction-ID: A1-48520-2

Emission class: Euro 4 Wheel Formula 4x2 Auction-ID: A1-48520-8

Availability: as of now Technical documentation: available Machine dimensions (LxWxH): 1.0 x 1.0 x 1.0 m Weight: approx. 150 kg The full box control was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel.

Technical Specifications & Performance Data The New Bottle Inspector Weight Checking Inspections Unit with Rejection Piston is an inline, high-throughput solution engineered for precise mass verification of individual packages without stopping product flow. Purpose-built for beverage production and industrial packaging environments, it delivers reliable, non-contact rejection for out-of-tolerance items, ensuring consistent quality and regulatory compliance. Application: Inline dynamic weight control with automatic reject piston Maximum speed: up to 11,000 bph (bottles/packs per hour) Inspection type: 2 (dual-threshold underweight/overweight logic) Containers: Brik cartons and cans (aluminum tins/cans) Conveying architecture: multi-conveyor configuration (4 conveyors) for stable weighing and controlled reject Operation: Simultaneous weighing without line stoppage; positive push-off reject ...

Stopped in 2024, condition unknown Auction-ID: A7-48148-15

Manufacturer: Krones Model / Type: Linatronic 735 M2 Type of Machine: Empty bottle inspector Year of Manufacture: 2007 CAPACITY - Capacity: 39,600 bottles per hour ADDITIONAL EQUIPMENT - Glideliner, Akkutable, and some conveyor belts may be available Find more here - / Contact us at -

Video inspections for battery-powered sewers equipped with battery, LCD screen, 5 meter cable, never used Overall dimensions: 800 x 500 x 400 mm Weight: 20 kg Auction-ID: A7-48622-173