inspection used for sale

Capacity: 3100 x 8mm Electric Elgo NC back gauge good condition inspection possible

The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm. Upon prior agreement, the possibility of an inspection in progress.

The machine is in good technical condition. Max. length of cut sheet: 2500 mm Max. tl. cut sheet metal: 12mm Machine dimensions: 3000 x 2200 x 1900mm Machine weight: approx. 10500kg In agreement, the possibility of inspection in progress.

pressure: 50 t throat: 245 mm stroke: 14 / 90 mm ram adjustment: 75 mm table height adjustment: 150 mm strokes per minute: 42/85 table surface area: 700 x 490 mm ram surface: 400 x 230 mm tool hole in ram: 40 mm total power requirement: 4 kW weight of the machine ca.: 3,41 t dimensions of the machine ca.: 0,8 x 1,75 x 2,1 m Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TB Sprint 310 VP 10 stations / jetties 30 cm pre-stacking height 1 x Hand Feeding Station Faulty and double-sheet inspection Incorrect Sheet Correction Vibrating Offset Delivery TB 304 QSM Automatic format setting Special device for 6-page envelope Hohner Staple Heads 3 Side bleed Support separators Tape delivery Condition - like new !

Bandwidth 75mm good condition inspection possible video available

The welding robot, including positioning devices, is in perfect condition. Total time the drives are switched on approx.: 15,000 hours Welding time approx. 6,000h Upon prior agreement, the possibility of an inspection in operation.

The machine is in good technical condition. Separating force: 220 kN Travel X: 2500 mm Travel Y: 1250 mm Control system BOSCH Rotary head In operation: 36200 h Accessories: 2 tool cartridges USB interface Weight: 11050 kg Upon prior agreement, the possibility of inspection while in operation.

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power : 3

Inv. Num. : 7007 Type: BA400-2 Producer: SW Created: 2010 Parameters: Control system: Siemens - Sinumerik 840D Number of stacking positions: 120 Maximum spindle speed: 17500 1/min X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ Conveyor High Pressure Pump Filtration Knoll 1x two-seater 5th axle W1W2 on U-side (manufacturer SW) Laser Inspection of Broken Tools

; Gross weight [kg]: 925; Inspection Date: 2024-03-06; Amount of previous owners: 1; Lift height[mm]: 850; Maximum lift capacity [kg]: 120

Vacuum filler Handtmann Type: VF 610 Hopper capacity: 40\100 (liters) Filling capacity: 3000kg/h Stuffing pressure: 35/50 bar Porting speed: Portions Size 25 - 450 Portions/min Portions Size 50 - 375 servings/min Portions Size 100 - 280 servings/min Portions Size 200 - 190 servings/min Power: 3.5 kW Weight: 475 kg net External dimensions: 120 x 122 x 204 cm Twisting and holding device included in price 5,000 engine hours Condition: After inspection, ready for work The stuffer can work with all popular types of casings: natural casings, collagen

Size: 960 x 1450 mm Equipments: Max. mechanical speed: 230 Noise Protection Hood Control unit: MBO Navigator-Control the machine has water damage possible inspection Sheet size min: 170 x 200 mm without delivery The machine has water damage as it is possible to inspect we sell the machine as a spare part donation Pockets: 4x Feeder Mode: Pallets pile feeder Sheet size max: 960 x 1450 mm

This is an electric rectangular cooking kettle from the premium manufacturer Electrolux/Therma, type PBEN40EKEM (400 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal install ...

This is an electric round cooking kettle from the premium manufacturer Electrolux/Therma, type PBON15EKEM (150 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal installation ...

; Gross weight [kg]: 2450; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200

• vessel in s/s • total volume vessel 1,000 ltr. • working temperature max. 143°C • working pressure -1/+3 bar • pressure fastening screws • agitato 0,75 kW • inspection glass • washing ball • outlet in the bottom center • manhole on top • various outlets

Metal laser cutting machine for sale. Inspection of the city of Krasnoyarsk. The set includes 2 replaceable portal-type hydraulic tables. Operating range Laser processing area, mm: 3000x1500; Maximum distributed load on the table, kg: 1000; Machine accuracy parameters (with feedback sensors) Positioning accuracy along the X, Y, Z axes mm/m: ±0.05; Positioning repeatability along the X, Y, Z axes, mm/m: ±0.005; Movements and feeds Working displacement along the X axis, mm: 3000; Working displacement along the Y axis, mm: 1500; Working movement along the Z axis, mm: 100; Speed of rapid movements along the X, Y axes, m/min (synchronously): 150; Speed of fast movements along the Z axis, m/min: 50; Working acceleration: up to 2g; Linear axes X-axis: linear drive; Y axis: linear actuator; Z axis: servo drive, precision rack and pinion with mechanical backlash compensation; ...

; Gross weight [kg]: 3500; Accessories: Kasperl, Bordwand, ...; Inspection Date: 2024-03-18; Amount of previous owners: 1; Working width [cm]: 230; Lift height[mm]: 1510; Maximum lift capacity [kg]: 220

; Gross weight [kg]: 2475; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 1900; Maximum lift capacity [kg]: 215

Various Probat roasters for sale: 5kg and 12kg All in stunning condition. Depending on the buyer's place, they can be sold with additional services such as: maintenance, installation, warranty, delivery Don't hesitate to reach out in case of interest. Inspection under possible in the west of France If you are outside of Europe write only if you can handle importation by yourself

Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...

Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...

We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input ...

Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for s ...

UNDER POWER IN PRODUCTION LINE. VERY GOOD CONDITION video available inspection possible Power in tons 22T Metal length 2500 mm Metal width 1250 mm

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111210 € : 2213.08 € : 730 mm : 1.200 x 500 mm : 1200 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 560 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 560 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm Max. table speed (X axis) 30 m/min vertical feed by ...

Wartsila 2 x 16V32LN Diesel Generating Sets Two identical units. Prime mover is Wartsila 16V32LN diesel engine which is 4-stroke, turbocharged and intercooled made in year 2004. Engines are coupled with ABB synchronous and brushless alternators. Both engine and alternator are installed on rigid common base frame and they have been operated in very limited hours. They are recently dismantled from a vessel and are ready for immediate transportation. Gensets are outside under tarpaulin and auxiliaries and turbos and governors are in a warehouse. Inspection is possible by appointment only. Technical data: Engine type Wartsila 16V32 LN-CR Number of units 2 Output 6.3 MWe / 60 Hz/ generator Rotation Speed 720rpm Manufacturing year 2004 Alternator ABB AMG0900XU10SE Voltage / Frequency 11000 V/ 60Hz

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

One Way Glass Bottle Filling Line 50000 bph for Beer and CSD Complete, very good condition non-returnable glass bottle line from depalletizer to palletizer featuring Krones 110 over pressure filling valve Sensometic VP-VI filler with automatic pressure control system, Krones bottle inspectors and labelling machine, Kisters Combiline automatic case packing machine, SEN twin deck bottle pasteuriser, and Italian Ementi (Mecra’s sister company) depal and palletizing system. This line was commissioned in year 2019 with completely overhauled (ecomac) filling block, Sipac conveyors from year 2016, brand new Krones inspectors etc. This line has been filling beers in 20 different sizes of glass bottles from 300ml to 650ml but it can fill any CSD. Line is still in operation Manufacturers: Krones, Kisters, Mecra, Sipac, Ementi, SEN Commissioned: in year 2019 Products: Beer and CSD Cont ...

Ref.Nr. 0808 Name of the system Exhaust air scrubber C180 Manufacturer: Kyocera Model C180 Year of construction 2022 ACCORDING to order confirmation from the manufacturer Description Exhaust air scrubbers for installation next to the exhaust or free installation for washing (absorption) of aggressive and toxic gases from the exhaust air directly at the point of origin. For cleaning, the exhaust air is passed through a spray mist, which is generated by a specially designed conveyor and spray wheel. The purified exhaust air is passed through agglomerators and mist eliminators to prevent moisture from entering the exhaust air system. Execution 1 housing made entirely of polyprophlen (PP), (see below for the overall dimensions of the device) 1 block flange DN 250 with 4 connections on the right, left and top sides 2 sealing covers to close the connections that are not ne ...

Table extension, extendable support, finely adjustable milling fence, stop adjustment via handwheel, clockwise/counterclockwise rotation---------- Technical Data ----------table size: 2,530x730 mm, work table height: 910 mm, spindle diameter: 30 mm, effective milling spindle length: 130 mm, max. milling cutter diameter: 300 mm, max. retractable milling cutter diameter: 300 mm, height adjustment: 180 mm, speeds: 3000/4,500/6,000/8,000/10,000 rpm, Motor: 7.5 kW, Suction nozzle: 120 mm, Suction nozzle bottom: 120 mm, Dimensions (LxWxH): 2,620x1,000x1,170 mm Sold as is, without technical inspection

MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...

This INTRAVIS Capwatcher 6432 Inspection System was manufactured in the year 2018.

Reference ID PP-40825 Category Label Printer Manufacturer Nilpeter Model MO4 Year Built 2010 Condition Good Location Europe Availability Immediately Machine Description 6x offset unit 2x Flexo Unit 9x IST BLK 200 w double Teknek 1 x Corona Nikka 4K inspection camera + monitor BST register camera + monitor Crossbar unit 6x ink dust extraction Rubber blanket mointing table Offsetplate mointing table software with Pre Press Interface Baldwin water control Clear Flo water cleaning system Hafner – Müchler cool/warm system for the inking units (rubbing rollers) Unicold cooling system for the UV units Anilox: 10 pieces 74 blanket cylinders Platecilinders: 18 x 21" 15 x 22" 15 x 20.3" 4 x 22.5" 15 x 18.625" 15 x 24" 17 x 26" 15 x 25"

Steel fan wheel---------- Technical data ---------- Pipe diameter: 300 mm, motor: 7.5 kW Sold as is, without technical inspection

---------- Technical Data ---------- Planing width: 510 mm, Table length: 2,520 mm, Diameter planer shaft: 120 mm, Number of blades: 2 pieces, Extraction nozzle: 140 mm Sold as is, without technical inspection

This is a rectangular pressure cooker FER300 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Technical details: •Dimensions WxDxH: 1600x850x900 •Weig ...

; Gross weight [kg]: 2134; Inspection Date: 2024-04-12; Amount of previous owners: 1; Lift height[mm]: 630; Maximum lift capacity [kg]: 550

Machine Type: Crane Traverse Manufacturer: Axzion Type: 20t Year of construction: 2007 Condition: used / very good, as hardly used Offer will only be sent if a complete imprint is provided! Price Vb Location Warstein , Germany Reference M-AXZ-0424 DESCRIPTION We offer you a used crane traverse from the manufacturer Axzion with full equipment. - Load capacity 20t - Weight 1150kg - Adjustment range 3 - 6m - Center hook (bottom) - Attachment points for crane - Attachment points for belt cranes Availability: by appointment Rental possible! Inspection according to the UVV at handover new Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions  ...

Digital display for planer thickness---------- Technical data ---------- Planing width: 630 mm, Number of blades: 2 pieces, Clearance height: 220 mm, Extraction nozzle : 150 mm Sold as is, without technical inspection

incl. tripod---------- Technical data ---------- rolls: 4 pieces Sold as is, without technical inspection

; Mileage [km]: 15022; Gross weight [kg]: 3500; Inspection Date: 2024-04-15; Amount of previous owners: 1; Maximum lift capacity [kg]: 250

; Gross weight [kg]: 3500; Inspection Date: 2024-04-15; Amount of previous owners: 1; Maximum lift capacity [kg]: 200

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

The machine is in good technical condition, after agreement possibility of inspection in running. Power of main engine 7,5kW. Parameters: 500mm, 1500mm

co-opening dressing tables, table opening to the rear, helical toothed feed roller, electric height adjustment, under-table roller, noise-insulated---------- Technical Data ---------- Planing width: 510 mm, Table length: 2,200 mm, Planer shaft diameter: 120 mm, Number of blades: 4 pieces, Swivel range Dressing stop: 90-45 , Clearance height: 250 mm, Extraction nozzle: 120 mm, Motor power: 4 kW Sold as is, without technical inspection

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 10 x 1/1 Gastronorm inserts in gas version, built in 2012. The device is tested, overhauled and fully functional in our in-house workshop. The RRP. for the device is € 11,950 net The price quoted is net plus 19% VAT. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our used equipment service for you: • 6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back • Shipping or pick-up can be flexibly selected • Expert advice - before and after the purchase • Provision ...

This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back � ...

Finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical Data ----------Table size: 1,000x930 mm, Work table height: 860 mm, Spindle diameter: 40 mm, Useful length milling spindle: 160 mm, Max. milling cutter diameter: 255 mm, Max. retractable milling cutter diameter: 255 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 4.7/5.7 kW, Extraction nozzle: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm Sold as is, without technical inspection