ink used for sale

Used production line for packaging juices. The line consists of: - TRIBLOCK ARROW PET 9/9/3, NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) STM 2014 - BUFFER TANK 1000L STM 2014 - CIRCULATION TANK 80L STM 2014 - PUMPS WPS 4 - 2 PCS, RETURN PUMP CIP WPS 6 1 PCS STM 2014 - NUT FEEDER BCF1 STM 2014 - AIR CONVEYOR SET STM 2014 - PLATE CONVEYOR SET STM 2014 - ROTARY COLLECTING TABLE STM 2014 - PET BOTTLE ORIENTATOR SB6000 STM 2013 - SCREW CAPPER ZB 6000, NUMBER OF HEADS 6, OUTPUT 6000/HOUR STM 2013 - PRINTER HITACHI INK JET UX HITACHI 2016 - LABELLING MACHINE EC-09/ LABELER EC-09 BIENKOWSKI 2018

impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 961.450 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 958.026 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VARIDAMP alcolor dampening CX equipment (additional equipment for cardboard until 1.2 mm) Ultrasonic double sheet control IR Dryer (Delivery) UV Dryer (Delivery) Logistics System Automatic format setting Automatic plate change Automatic washing device Chromed cylinders ALV 2 Double extension delivery Blower ionization on feeder CIPLink Ink profile presetting via CIP3 data ErgoTronic console with ColorTronic "19" TouchScreen Raise 630 mm complete ( feeder ,delivery and gallery) Grafix Hitronic S powder sprayer It's very well maintenance by KBA It's very good condition Available immediately

NEW packaging machine for preformed trays with aroma protection lid between 100-150 gr. The machine was never used and it was bought in 2015. It can fill 2 trays at a time with volumetric dispensers, performs the vacuum and the introduction of the inert gas, welds the upper seal film and puts the aroma-saving lid on. The machine is equipped with a loader for the trays and a loader for the lids. The productivity of the machine is about 20 trays per minute, equal to 1,200 trays per hour. The machine is completed by an automatic labeling unit, capable of affixing 2 labels, one on the bottom of the tray and one above the aroma-saving lid. The labeller is equipped with an ink jet marker for batch and expiration, and has a rotating accumulation plate for the labeled and marked trays. The machine was exclusively used for initial commissioning, but it never produced anything. The inert ...

Automatic labeling bench for glass jars AMETIS Year 2018 2 labeling stations: installation of a cover label with tamper-evident tab + installation of a body label Rate: approximately 12 jars / min with lid label with tab; about 50 pots/min with body label Bench composed of: A turntable; to ensure the storage and distribution of pots (diameter 1200mm) with edge on the tower and deflector for guiding the pots on the conveyor AG204 labeler; for placing the label on the lid of the pots (width between 10 and 110mm, length 5 to 600mm), dispensing speed 500mm/sec, detection of pots by photoelectric cell with reflector Pneumatic reel; for folding the tab of the label placed on the lid of the jars. flap on the body of the pots Static wrapping machine; for rotating pots with folded tab detection AG204 labeler; for attaching the label to the body of the pots Dynamic wrapper; to rotate the ...

Laetus ’ MV-70 offers a range of features to meet demanding requirements for secure marking of folding boxes in the packaging line. Up to two different print positions can be set up, permitting simultaneous printing of the front and the back sides of a folding box. Features include the following: • Secure pack handling system • One user-friendly operating panel to control all modules • Space savings due to slim dimensions • Extensible with modules • Simple maintenance due to GMP-compliant design • Format adaptation without tools The MV-70, combined with a Hapa redcube printer, a FlexLink conveyor belt option, and Laetus software S-TTS (Secure Track & Trace Solutions) ensures reliable serialization of folding boxes in packaging lines. The redcube printer’s DOD technology and the UV-hardened ink achieve high print quality, according to t ...

PERFECT CONDITION Find below the technical information taken from the documentation (attached): Media specifications : Minimum label size: 20 x 20 mm Maximum label size: 180 x 300 mm Maximum label roll diameter: 350 mm Approx. 6,000 labels per roll (120 x 100 mm) Paper roll length: 600 m Core: 76 or 40 mm Ink ribbon length: 600 m Other features : Mounted on a frame in left or right hand version Stainless steel electronics cover Operating temperature: 0 °C to +40 °C Power supply: 220 V, 50 Hz, 3 A Total weight of ETI 3000® LR : 45 kg Options ETI 3000® LR : - Harting® industrial connector - Pre-alarm at the end of the label - Light and sound alarms - Label presence control and barcode reading - Delayed installation box - Fixed or adjustable stainless steel stand Printing features : Printing methods: thermal transfer or direct thermal direct ...

DDS II Dampening, DBA electronic detector, 33 mill imp, Quick action plate clamps, Bacher reg.clamp, Digital counter, Ink segment blade, In very good conditions

- IR dryer - Alcolor alcohol dampening - perfecting 2+2 4/0 - high pile delivery - CPC 1.04 - Autoplate semi-automatic plate loading - ink rollers, impression cylinder, blanket cylinders, offset cylinders, automatic wash up device - Alphatronic 200 powder sprayer - Max printing area 510 x 740 mm - testable - in production till the end of December - very good condition

Public Authority Machine - Prinect Press Center - Axis Control - Suction belt feeder - Alcolor Vario dampening unit - Baldwin HydroStar cooling device - Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Grafix Alphatronic 200 - Dryer HD Variante 2 - High pile delivery X1

Carton sealer with ink tamping and scissor strap Vin Pack + Normpack / Germany Carton sizes: Freely adjustable Year of construction 2010 - 2020 More information and price on request

A used and well-maintained ABA from HUNDEGGER without planer, but with transfer cross conveyor. Type. Hundegger K2 – 5 axle 450 EKP control Year of construction 2007 5 strand feed cross conveyor 2200 mm wide Pull-out wooden shelf Under-counter swivel cross-cut saw – bottom open at the bottom for waste on conveyor belt Saw table chrome-plated Refined wooden support surfaces Saw blade diameter 800 mm Universal milling machine 5 axis – With finger milling cutter and dovetail milling cutter Control for disposal facility Front marking device Ink. Jet Markers Marker and marker at the bottom Chains – Rear Horizontal Slitting Device Finger milling machine at the bottom vertical 1 Drills down vertical 2 horizontal drill rigs, one of them swivel Pneumatic beam turning station With ÜGQF Without planer Weight of the ABA 15 t Pure machine length approx. 28 m withou ...

Printingmachine - Two Colour Make Heidelberg Model PM52-2 Year 2004 Impressions 32 million Maximum sheetsize 370 x 520 mm Dampening Alcolor with Baldwin recirculation chiller Plate change Heidelberg Autoplate Details Sliced ink ducts Powder sprayer Roller washing, blanket washing Plate punch + plate bender

Straight Machine, CP Tronic, Alcolor Dampening with Technotrans Refrigerator, Preset, Autoplate, Auto-Wash, Laser Cut Ink Ducts, Mediprint GS Powder Spray, Sheet Decurler, Format: 360x520, Min. 105x145mm, Speed: 15000 Sheets/Hour

Straight Machine, CP Tronic, Alcolor Dampening with Technotrans Refrigerator, Preset, Autoplate, Auto-Wash, Laser Cut Ink Ducts, Powder Spray, Sheet Decurler, Format: 360x520, Min. 105x145mm, Speed: 15000 Sheets/Hour

Straight Machine, Stream Feeder, Double Sheet Detection, Electronic Side Lays Control, Alcolor Dampening With Baldwin Cooling Refrigeration, CP Tronic, Printmaster PM 74 Press Control, Autoplate, Auto Wash-Up Devices For Blankets, Impression Cylinder And Ink Rollers, Weko Powder Sprayer, Speed: Up To 13.000 Sheets/Hour

Used filling monoblock for Oil and spirits Polaris model B6 speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits We summarize the main characteristics of our used filling monoblock and which make them UNIQUE on the market Elasticity of work that allows you to switch from one bottle format to another Acting with simple operations and without replacing parts of the machine this flexibility is also particularly suitable for those who carry out the third party Speed of the format change that can be carried out from 10 to 30 minutes at the most Given the reduced times the line can be easily used even for small production batches Use of any bottle format cylindrical square triangular amphorae flasks etc from 0 100 to 2lt in glass and PET We designed our labeling system in such a way as to guarantee the maximum laying precision on each type of bottle Lines B6 Can Be Composed  ...

Used Complete PET Line for Water 3000 bph 1 6 x BM500 Blow Mold system with 2 x 25 H P Commercial Air Compressors mounted on 1 x 240 gallon 250 p s i pressure tank 6 x pre heaters 6 x Blow molders capacity up to 3000 bottles per hour Complete with top of the line air preparation and air pressure units for a consistent reliable and oil less air supply 2 Ozone system BWOZ27 Deluxe ozone disinfection system Capacity up to 190 L water per minute Utilizes 100 gallon stainless steel tank for ozone contact time Complete with an oxygen concentrator ozone generator Visual inspection contact tube stainless steel pump venturi injector central electric controls and mounted on stainless steel frame Used Complete PET Spec 3 BR3000 bottle insert capacity up to 3000 bottles per hour automatic rinsing and position of bottles insuring clean bottles 4 BF3000 bottle filler capacity up to 3000 bottles per ho ...

Used Complete Bottling Line Cimec Cimec used filling monoblock for Bottles with Rinser Filler Crowner Set for Bottle size 330ml NRB Cimec used monoblock can fill 250ml to 1 litre containers with additional change Parts Model America DPS 16 16 1C 193 A In the line of the Used Complete Bottling Line Cimec there is one automatic Shrink wrapper for Manually pre erected trays of product manufacturer Giemme Srl Model Altair 70 AL Domino ink jet coding system type A420i Air Knife drying system Bottle and Can Drier Manual unloading table [...for more information send your inquiry to the seller.] refno: LC394

2 Farben Offsetdruckmaschine - 2 Color Sheet-Fed Offset Press Heidelberg GTO52-2+ Year 1997 - Serial-No. 714923 Size max. 360 x 520mm Impressions 48 Mio. Dampening System DDS with Technotrans refrigeration Plus Version Ink laser ducts Manuals Included -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Heidelberg CD 102-4 Age: 2011 157 mio impression Autoplate Preset Plus Feeder Preset delivery CP2000 Alcolor Vario Dampening Combistar, Alcosmart Autom. wash: Ink Roller, Blanked and Impressions-cylinder wash, Venturi Air Transfer Between All Units Pre Loading Device Antistatic Device PowderStar

PVC sheet extrusion line with head: 280mm, composed of: - 2-screw extruder, brand: Weber, model: DS.8.22, motor: 30 Kw (40 hp), load doser, degasser with vacuum pump. Variable speed drive and electrical panel. - Wide blade head: 280 mm. - Calender, width: 300 mm, diameter: 150 mm. 3 water-cooled rollers. With stretching. - Ink baths, dryer, stretch for several coats of paint. - Cutting shear. - 1-reel winder, width: 300 mm. - Various replacement rollers for ironboards, printers and engravings (drawings on foil). Ahem: Wood simulation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Total impression count 90mio, Accessories included:, - PRESET PLUS feeder and delivery, - Steel plate on feeder and delivery with ramp (for plastic or wooden pallets), - Stream feeder with belt, - Electronic double sheet detection, - Electromechanic double sheet detection, - Electronic side lay control, fotoelectronic and akustic, - Anti-static on feeder and delivery, - Alcolor continuous dampening system with Technotranss alcohol metering; cooling and re-circulation unit system, - Preset (autom. paper size and thickness setting), - Press Center touch screen consolle and diagnosis; self diagnostic;Remote inking; dampening; axial, circumferential and diagonal register control with light pen; day light illuminator and cassette or memory card for job memories), - Programmable automatic blanket cylinders wash up via Prinect Press Center, - Programmable automatic impression cylinders wash up  ...

2 Color Sheet-Fed Offset Press Heidelberg SM52-2 Baujahr / Year 1997 - Serial-No. 201189 Druckzahl / Impressions 47 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kuehlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbuecher / Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Tray thermoforming machine for packaging meat products and derivatives. Compact machine made up of a thermoforming module, loading area, upper film applicator, welding area and cross section. Bottom film width: 520mm Upper film width: 515mm Mold 4 x 2 trays dimensions: 150 x 120mm With ink injector IMAGE mod. 9040

Thermoforming machine Manufacturer: Multivac Model: R 530 Year of manufacture: 2001 Film width 547 mm (Jumbo roll) Advancement 612 mm With dual mold sets: Ø 140 mm (9x) with stamper 132 x 140 mm (12x) For gas pack Incl. gas mixer and oxygen measuring Incl. ink jet printer and label applicator Incl. a booster pump and 2 external back pumps With central lubrication The machine has been frequently maintained and overhauled and appear in extremely good condition

- CP2000 Center - Preset Plus Feeder - Stapel plate Feeder & Delivery with Ramp . ALCOLOR Vario Dampening system - Technotrans CombiStar beta.c (watercooled) - Ink temperature control - HEIDELBERG Autoplate - InkLine - Inking roller wash-up system - Blanket cylinder wash-up system - Impression cylinder wash-up system - AirStar (watercooled) - Coating unit with chamber blade - extended delivery X2 - DryStar IR+Hot Air - GRAFIX Exatronic Plus - Preset Delivery - Pump- and Control unit - Outdoor chiller

- CP 2000 - Image Control - Preset Plus Feeder ALCOLOR dampening units - TECHNOTRANS Hydrostar beta.d (air cooled) - Alcosmart AZR - Autoplate Plus - Ink roller wash-up device - Blanket wash-up device - DryStar 3000 - Scrollstar - AirStar Pro - CleanStar - Grafix Exatronic Duo Plus powder spray - Preset Plus Delivery

- Prinect Classic Center - Stream feeder - ALCOLOR dampening units - BALDWIN cooling device - HEIDELBERG Autoplate - Ink roller wash-up device - Blanket wash-up device - Grafix Alphatronic 200 - Plusversion

Heidelberg Speedmaster 52 4+, Year 2009 370x520 mm (14.5x20") approx. 26.5 million impr. PressCenter AxisControl Alcolor Autoplate Auto. Ink roller wash-up device Auto. blanket wash-up device Auto. Impressioncylinder washer optimized sheet guidance up to 0.6 mm Low-pile delivery Antistatic device Double-sheet control Plus version Stream feeder Powder sprayer Etc. Available: at short term

Paint mixer Busch FM 20; Capacity 20kg; mobile. Ink mixer Busch FM 20; capacity 20kg; mobile.

Inv. Num. : 6040 Type: SureColor SC-F2100 Producer: Epson Created: 2019 Parameters: Print area: 406x508 mm Number of prints: 1248 Print resolution: 1440x1440 DPI Table dimensions: 356x406 mm Equipment: Replacement toner Ultrasonic Cleaner Thermal press Drucktech SP-45-NA 2022: new printheads Epson PrecisionCore TFP Printhead UltraChrome DG Inks Roller handle M White ink circulation system Automatic height adjustment of the print head

RYOBI 784 EP year 2007 A 4 Colors Offset printing press of size 60 x 78 cm (54 Mio. Imp.) Including : PCS-K with Monitor and Color Measurement, Registration settings via PCS as Ink,RyobiMatic Dampening with Technotrans D , Auto. Blankets and Rollers Washers, CIP Capable, RPC Semi-Automatic Plate Change, Perfector 4/0 - 2/2, Grafix powder spray. In nice condition, still under power

Ink Technology: Ultrachrome® HDX Colours: Light Black, Light Light Black, Photo Black, Matte Black, Cyan, Light Cyan, Yellow, Vivid Magenta, Vivid Light Magenta, Orange, Green Minimum Droplet Size: 3,5 pl Nozzle Configuration: 360 Nozzles Black, 360 Nozzles per Color Printing Resolution: 2.880 x 1.440 dpi Paper Formats: A1, A2 (42,0x59,4 cm), DIN A3+, A3 (29,7x42,0 cm), A4 (21.0x29,7 cm), B2 (51,4x72,8 cm), DIN B3, DIN B4, 17 Zoll, 24 Zoll, User defined Print Margins Sheet Media: Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Compatible Paper Thickness: 0,08 mm - 1,5 mm Duplex: No Equipment / additional information: 1 COMPLETE SET OF NEW INKS (with a goods value of SFr. 1000.-)

Heidelberg XL 106-4+LX2 age 2015, impr 130 mill.Condition: Very Good, Machine is in perfect condition Still installed in Danmark, - Max speed: 18.000 ark/hour, - Print Press Center, - Wallscreen monitor and software, - Auto register, - Intellistart, - Preset Plus feeder, - Suction brush roller first unit, - Integrated dobble sheet control, - StaticStar, - Autoplate pro 25 sek. per unit, - Combistar Can Ink Temperature Control, - FilterStart Compact dampening Water Filter, - Powderstar AP 500, - Cleanstar powder exhaust, - Drystar Combination,IR and hot air, - Extended delivery with Preset Plus, - Instant Gate (prepress interface), - Color Assistant Pro software

Polytype BDM 681 Polyflex, for round cups, age 2014 only used for less than 20,000 hrs. The pre-treatment and the UV-Mandrel curing are integrated in the basic machine concept. The newly designed cup in-feed and discharge automation round off the system. The main characteristics of BDM 681 printing technology are the very high effiency, the outstanding print quality, the short change-over time as well as the excellent accessibility and ergonomics (one operator layout). Technical data: Min./max. cup height: 35 -200 mm Min./max. rim diameter: 60 - 185 mm Min./max. taper: 2 - 15° Max. print height: 145 mm Max. print length: (6 sections) 273/345 mm Max. print length: (3 sections) 418/502 mm Max. printing speed: 650 cups/min Servomotor Universal Screw Denester UV Unit with dual 6" UV-Lamps FHW 3.0 CP Corona Pretreatment with Leak Tester. The Print Heads are modern day Print Heads ...

- CP Tronic - Preset Feeder - Perfecting 2/0 or 1/1 - ALCOLOR dampening units - BALDWIN cooling device - Ink temperature control - Autoplate - standard wash-up devices - GRAFIX Alphatronic 200 powder spray - Low pile delivery

DIE CUTTER HEIDELBERG GT -Max paper size 32x46 cms. -Complete with ink unit and rollers -Two frames, plates and accessories -In production, available immediately

Heidelberg Speedmaster 52 2+, Year 1998 370x520 mm (14.5x20"), approx. 85 million impr. CP-Tronic Alcolor Autoplate Auto. Ink roller wash-up device Auto. blanket wash-up device Auto. Impressioncylinder washer Low-pile delivery Double-sheet control Plus version Stream feeder Powder sprayer Etc. Available: at short term

Alcolor Vario continuous dampening Impression-cylinder washing device - automatic Ink-roller washing device - automatic Blanket washing device - automatic Plate cylinder - coated Powder sprayer (WEKA AP 110) Impression cylinder - coated Blanket cylinder - coated HydroStar (dampening solution supply) (Compact) Model (0,6 mm) Prinect Press Center Prinect Axis quality control

- Prinect OnPress Center - Stream feeder - Alcolor dampening units - Baldwin HydroStar BC 713 EF cooling device - Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Grafix Alphatronic 200 powder spray - Plate punch and bender

#404-850 Heidelberg SM 74-10-P-H Perefcting: 5/5-10/0 Size: 53 x 74 cm Age: 2004 Imp.: 150 million Location: Europe - CP 2000 - Autoplate - CP Tronic - Image Control - Alcolor Vario - Color Asisstant - Ink Temperature Control - Blanket and Impression Cylinder Wash Up Device - Water cooled - In Production

Impressions=100 m, Max. size= 52 x 37 cm, Availability= 042024, Yes, Yes, CPC 1-03 CP Tronic Alcolor Autoplate cooling device Technotrans electric pull-lay control electrical double sheet control automatic ink unit washing device automatic blanket washing unit automatic impression cylinder washer powder sprayer LOT Loaded in truck or container

Ink unit temperature control Full automatic plate changer (FAPC) Cooling and recirculation (Technotrans beta.c) Perfecting 8:0/4:4 Non-stop feeder Powder sprayer (Megatronic) SIS-Sensoric Infeed System Drivetronic SPC (Simultaneous Plate Change) DensiTronic Professional Plate Ident QualiTronic ColorControl CleanTronic Synchro - Parallel washing of rollers and blanket Setup for thin substrates

Classic Center (Ink & Register remote control) Autoplate (semi automatic plate loader)

Description: the MY-390F/W is the same automatic machine as the MY-380F, but has the ability to load larger material for printing uses dry ink for printing. , features crisp printing that dries quickly, does not stick and is very difficult to remove (has good adhesion) can print characters on thin cardboard, paper, leather, plastic or aluminium foil in sheets and bags is specially designed for printing paper boxes flat before filling, plastic and paper bags, etc. , uses automatic temperature control suitable for printing a variety of materials Approx. Onsite Dimension. (l x w x h): 440 x 465 x 300 mm, weight approx.: 26 kg

Description: the MY-390F/W is the same automatic machine as the MY-380F, but has the ability to load larger material for printing uses dry ink for printing features crisp printing that dries quickly, does not stick and is very difficult to remove (has good adhesion) can print characters on thin cardboard, paper, leather, plastic or aluminium foil in sheets and bags is specially designed for printing paper boxes flat before filling, plastic and paper bags, etc. , uses automatic temperature control suitable for printing a variety of materials Approx. Onsite Dimension. (l x w x h): 440 x 465 x 301 mm, weight approx.: 26 kg

Description: the MY-390F/W is the same automatic machine as the MY-380F, but has the ability to load larger material for printing uses dry ink for printing features crisp printing that dries quickly, does not stick and is very difficult to remove (has good adhesion) can print characters on thin cardboard, paper, leather, plastic or aluminium foil in sheets and bags is specially designed for printing paper boxes flat before filling, plastic and paper bags, etc. , uses automatic temperature control suitable for printing a variety of materials Approx. Onsite Dimension. (l x w x h): 440 x 465 x 303 mm, weight approx.: 26 kg

Description: the MY-390F/W is the same automatic machine as the MY-380F, but has the ability to load larger material for printing uses dry ink for printing features crisp printing that dries quickly, does not stick and is very difficult to remove (has good adhesion) can print characters on thin cardboard, paper, leather, plastic or aluminium foil in sheets and bags is specially designed for printing paper boxes flat before filling, plastic and paper bags, etc. , uses automatic temperature control suitable for printing a variety of materials Approx. Onsite Dimension. (l x w x h): 440 x 465 x 304 mm, weight approx.: 26 kg