injection used for sale

Stork N-2500-1400 Year of construction: 2005 Injection unit: Spray pressure (max.) 2100 bar Injection volume (max.) 595 ccm Injection weight PS (max.) 565 g Spraying speed (max.) 299 ccm/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the spars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between tension p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control)  ...

Yizumi Injection Press Model: YL2-V280L Clamping force 2800 kN Volume: 2000cc Mold open stroke 500mm Min. mold height 100mm Heated platen size 670mm x 780mm Heating plate daylight 600mm Injection pressure 1970 bar Theoretical Injection volume 2000cm3 Oil pump power 11kW System pressure 230 bar Total power 37kW Power supply: 415V, 50Hz, 3P+N+PE Rexroth variable pump + Inovance servo motor: Year 2021 CE marked

This machine complies with CE standards but is not in working order (hydraulic problem / pump or angular translator / other). Sale in condition The offer includes dismantling, preparation for shipment and loading on truck on 26/09/2022. The machine is equipped with an injection unit, hydraulic core (without robot / manipulator). Type of material used: ABS/PC Closing force: 165 T Opening stroke: 525 mm Distance between columns: 525 x 525 mm Platen size: 760 x 760 mm Min/max mould height: 180/560 mm Injection moulding: Screw diameter: 43 mm Screw length: 20 D Injection volume: 319 cm3 Pressure: 2028 bar General: Motor power: 22 kW Total installed power: 31.9 kW Weight: 7.8 tonnes

used Engel machine type Victory ES3550/600HL with additional peripheral devices. Number of hours: 1979 Injection unit: Screw diameter: 70mm Injection volume: approx. 1500cc Closing unit: Closing force: 600T Table dimensions: attachment, enlarged version Ejector: hydraulic Closing system: hydraulic, tie-barless Control: CC100 – Polish language Additional equipment: Hydraulic core string on the fixed side – x3 Hydraulic core string on the moving side – x3 Pneumatic valves – x2 Hydraulic cascade valves – x6 Automatic drives of side covers on both sides of the form, The machine is serviced by an authorized Engel service center, In 2020, a set of hydraulic pumps was replaced with new ones, Dimensions: Weight – 38T short circuit unit, 10T injection unit, Dimensions (L x W x H): 9410 x 2480 x 2580 Power supply: Pump/Motor: 60kW Heaters: ...

Manufacturer Ferromatik Model K275-s Year 1998 Clamping Force 2750 kN International dimensions 2750 H-1636 Injection pressure 1575 bar screw diameter mm 80 injection volume cm³ shot capacity gr 1450 injection pressure bar 1575 Stroke volume 1040 cm3 Motor 55 kw Heating 22.7kw Weight 13.6 T

Injection molding machine BM-BIRAGHI model HORIZON 4370/650, Italy, 1985 Clamping force - 650 tons. Injection volume - 2000 cm3. The maximum injection pressure is 150 bar. Distance between columns 800x800mm. New screw pair f.90 mm.

Year of production: 2004 Total installed power: 185 kW Max. injection speed: 160 mm / s Max. injection pressure: 1560 bar Screw diameter: Ø76 mm Max. shot weight for PP: 1020 g Mold closing force: 6350 kN Clearance between H x V columns (↔ x ↕): 1060 x 960 mm Mold height min: 450 mm Max. mold height: 1000 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 300 mm Centering rings diameter: 160 mm Max. ejector stroke: 300 mm Form H x V clamping plates dimensions: 1500 x 1400 mm Aggregate volume: 2487 g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

SANDRETTO Serie NOVE 2200/860 from 2003 Injection unit: 860 Screw diameter: 50 mm Screw length L / D: 20 Theoretical injectable volume: 475 cm³ Maximum injection pressure: 1815 bars Maximum injection flow: 193.2 cm³ / s Maximum screw rotation speed: 295 min-1 Closure unit Closing force: 2200 kN Mini / Max mold thickness: 210 - 630 mm Opening stroke: 550 mm Passage between columns: 510 x 510 mm Platen size: 770 x 770 mm General Pump motor power: 30 kW Heat output: 14.2 kW Total installed power: 44.2 kW Quantity of oil: 350 l. Dimensions (Length x Width x Height): 6.135 x 1.65 x 2.08 m. Weight: 8100 Kg

NEGRI BOSSI NB 300 Injection unit: 1760 Screw diameter: 60 mm Screw length L / D: 23 Theoretical injectable volume: 775 cm³ Maximum injection pressure: 2040 bars Maximum injection flow: 220 cm³ / s Max screw rotation speed: 180 rpm Closure unit Closing force: 3000 kN Mini / Max mold thickness: 280 - 680 mm Opening stroke: 640 mm Passage between columns: 630 x 630 mm Platen size: 935 x 935 mm General Pump motor power: 37 kW Total installed power: 62 kW Dimensions (Length x Width x Height): 7.15 x 1.43 x 2.36 m. Weight: 11800 Kg Spare part : A new set of screws + bimetallic sheath with a diameter of 60 mm is available as a supplement.

Engel ES 1350/275 HL ST Year of production: 1999 Injection components: Screw diameter [mm]: 60 Max injection weight PS [g]: 547 Injection pressure [bar]: 1834 Closure components: Closing force [kN]: 2750 Table plates dimensions [mm]: 1050 x 900 Min / max mold height [mm]: 350/850 Ejector stroke [mm]: 380 Control: EC100 Additional equipment: Robot: Engel ER-HLI71 Hot runners - 6 items Hydraulic cores 1 pc Pneumatic cores 1 pc Dimensions: Length / width / height [m]: 7.1 × 2.9 × 2.7 Weight [t]: 19.6 The machine is still in operation and can be inspected at the companys premises. You can make a purchase only after inspecting the machine at the companys premises

Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – "ENGEL ERC53/1-F" Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Key data: 500 mm, 25

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Key data: 500 mm, 30

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Key data: 273 mm, 49 , 28

Used injection molding machine Dr. Boy 30 M + Screen controlled machine mipronic + Sold in functional tested or partially overhauled condition. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 255 mm (height) x 255 mm (width) 400V / 50 Hz Operating instructions More Dr. Boy injection molding machines from 220 KN to 80 KN in stock More Dr. Boy Injection Moulding Machine 30 M mipronic (Schleicher Control) in stock Plasticizing cylinder 18 mm, born in 1990 Sample photo Offer subject to change

Type Injection Moulding Machine Category Plastic Processing Brand Ferromatik Year 1999 Condition Used Location Switzerland Machine Specifications Controller NA Clamping Force 110 Ton Screw Dia. 40 mm Machine Description This Ferromatik Milacron K110 S D0gzkm Injection pressure 2240 bar Distance between tie bar 470 x 470 mm Closing force 1100 kN injection molding machine was manufactured in 1999. Production hours 24'456. Mold opening stroke 550 mm Screw diameter 40 mm. Weight of the machine 5'500 kg

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. PECULIARITIES: • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Manufacturer: Negri Bossi Model: 160T V 160 – H 820 Year of manufacture: 2005 INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³. Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressure on the material : 1700 bars Screw speed : 250 rpm Number of temperature zones : 4 N CLOSING UNIT Closing force : 1600 kN Opening stroke : 460 mm Thickness of the mould : 170-550 mm Distance between tie-bars: 510 x 450 mm Plates size : 780 x 730 mm GENERAL Heating power : 18 kW Total installed power: 31 kW Dimension : (WxHxD) 5720 x 2150 x 1500 mm. Weight : 6150 Kg

Electric injection moulding machine Manufacturer: JSW Model: 55T AD 60H Year of manufacture: 2010 Screw diameter: 28 mm Screw length: 20D Injection volume: 62 cm3 Injection pressure: 2190 bar

KRAUSS MAFFEI 125 T injection press in good condition Reference: 125-460 C1 Closing unit: Closing force: 125 tonnes Opening stroke: 900 mm Distance between column: 470 x 470 mm Mold min. : 300mm Max mold: 600 mm Tray dimensions (h x v): 770 x 750 mm Injection unit Screw diameter: 40 mm Injectable weight: 195 g Injection pressure: 2112 bars Measurements and weights Dimensions: 4.5 x 1.5 x 2.2 m Machine weight: 4100 kg Euromap 12 robot interface

ARBURG 70T 320 KS 700 - 100 INJECTION UNIT Screw diameter: 25 mm Calculated injection volume: 49 cm³ Length / diameter ratio: 20 L / D Maximum injection rate: 88 cm³ / s Pressure on the material: 2240 bars PS plasticization capacity: 41 Kg / h Screw Speed: 37 RPM CLOSING UNIT Closing force: 700 kN Opening stroke: 250 mm Mold thickness Mini / Max: 200/400 mm Max distance between tray: 650 mm Passage between columns: 320 x 320 mm Tray size: 476 x 476 mm GENERAL Heat output: 11 kW Total installed power: 17.9 kW Quantity of oil: 120 l. Weight: 2090 Kg

Year 2013 Type of control: NC5 Number of hours: 47,812 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Closing weight: Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners

Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (=standard) mm M12-M16 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes

Machine: NETSTAL 550 T 5500-4200 EVOS Year: 2010 Number of hours: 7000H Closing Closing force: 550 T Opening stroke: 900 mm Between columns: 1020 x 920 mm Mini / maxi mold: 600-1050 mm Max distance between plates: 1950 mm Injection: Screw diameter: 80 mm Screw length: 27 D cm3: 1608 Bars: 2400 General: Engine power: 132 KW Heating power: 94 KW Closing weight: 32 tonnes Injection weight: 8 tonnes Dimensions length: 9.83 m Dimensions width: 2.54 m Dimensions height: 2.35 m Options: Cores: 2 Robot interface: yes E 67 Bi metal: yes 12 pneumatic controls 16 hot runners Colorator interface; bi-material interface; compression injection interface Graph track Power master type lamination

Clamping force kN 2400 Mould thickness mm 460-800 Opening stroke mm 0-510 Distance between tie-bars V/H mm/mm 630/630 Stroke, injection unit mm 550 Nozzle contact force KN 78 Screw diameter mm 60 Injection pressure bar 1534 Max. injection volume cm3 565 ø centring ring mm 160 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M20 Robot Yes

Clamping force kN 2000 Mould thickness mm 200-500 Minimum mould diameter mm 315 Opening stroke mm 200-480 Distance between tie-bars V/H mm/mm 510/430 Stroke, injection unit mm 470 Nozzle contact force KN 75 Screw diameter mm 55 Injection pressure bar 1751 Max. injection volume cm3 465 ø centring ring mm 125 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M16 Robot Yes

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 139 cm³ Length / diameter ratio: 23 L / D Max injection rate: cm³ / s Pressure on the material: 2500 bars Laminating capacity PS: Kg / h Screw Speed: 58 RPM Hydraulic motor torque: 560 Nm Hydraulic Motor Power: HP Nb Temperature Zones: N CLOSURE UNIT Closing force: 1300 kN Opening stroke: 650 mm Thickness Mold Mini / Max: mm Max distance between plate: mm Passage between columns: 470 x 470 mm Tray size: 715 x 715 mm GENERAL Heating power: 22 kW Total installed power: 38 kW Amount of oil: 260 l. Dimension: (WxHxD) m. Weight: 6380 Kg

BILLION 100T H 470/100 SELECT INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 220 cm³ Length / diameter ratio: 23.5 L / D Maximum injection flow: 251 cm³ / s Pressure on the material: 2030 bars Screw Speed: 175 RPM CLOSING UNIT Closing force: 1000 kN Opening stroke: 175 mm Passage between columns: 445 x 445 mm Tray size: 630 x 630 mm GENERAL Dimension: (WxHxD) 5.3 x 1.8 x 1.35 m. Weight: 5230 Kg

Year of issue: 2006 Length of injection molding machine, mm: 6900 Width of injection molding machine, mm: 1700 TPA height, mm: 2500 Clamping force, tons: 320 Weight, t: 12 Screw diameter, mm: 55 Injection volume, cm³: 1026 Productivity kg / hour (РС): 187 Drive, kW: 37 Heating, kW: 18.5 Slab size, mm: 1000 Slab size, mm: 1000 Between columns, mm: 660 Between columns, mm: 660 Fastening of clamps VNUTR cont., Mm: 280 Fastening of clamps VNESHN. cont., mm: 350 KRM plate travel, mm: 670 Package height min, mm: 240 Package height max, mm: 680 Full disclosure KRM, mm: 1350 D of the landing ring fixed plate, mm: 160 D of the landing ring movable plate, mm: 100 Pusher stroke, mm: 160 Hydraulic oil grade: 46 Oil volume, lit .: 620 Oil change, hour: 9000

Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 570 x 570 Clearance between columns (hxv) [mm] 420 x 420 min./ max. mold height [mm] min 250 injection unit Screw diameter [mm] 30 Injection weight [g] 89 Injection pressure [bar] 2470 Electric-hydraulic equipment Nominal power of the pump motor [kW] 25 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (length x width x height) [m] 4.5 x 1.7

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 715 x 715 Clearance between columns (hxv) [mm] 520 min./ max. mold height [mm] 250 / 500 injection unit Screw diameter [mm] 55 Injection weight [g] 310 Injection pressure [bar] 1720 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 6.00 x 1.50 x 2.40

Clamping force [kN] 250 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 270 x 270 Min./max. mold height [mm] min125mm Maximum opening width [mm] 450 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82

Krauss Maffei KM 200-1400 C2 + injection molding machine Year of production - 2004 Fully hydraulic locking system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics version with abrasive protection, screw diameter 60mm, with back-lock and open nozzle. Closing force 200 T Screw diameter 60 mm Clearance between columns X 560 mm Clearance between Y columns 560 mm Injection volume 679 cm³ Shot weight 476 g The specific injection pressure is 2000 bar Tool plates length 915 mm Tool plates width 910 mm Robot interface Length x width x height 5700.0 × 1700.0 × 2200.0 Weight 10,500 kg

Closing unit Clamping force [kN] 400 Dimensions of mounting plates (hxv) [mm] 510 x 535 Clearance between columns (hxv) [mm] 320 x 320 min./ max. mold height [mm] 150 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection pressure [bar] 2050 Electric-hydraulic equipment Nominal power of the pump motor [kW] 10 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 2.5 Dimensions (L x W x H) [m] 3.30 x 1.18 x 1.67

Clamping force [kN] 12000 Clearance between columns (hxv) [mm] 1200 x 1200 min./ max. mold height [mm] 500 - 1695 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 100 Injection volume [cm3] 4800 Injection weight [g] 4363 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 70

Clamping force [kN] 1000 Clearance between columns (hxv) [mm] 420 x 370 min./ max. mold height [mm] 230-730 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 250 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.4 Heater power [kW] 18.4 Dimensions and weight Dimensions (L x W x H) [m] 4.3 x 1.5 x 2.0 m

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 850 x 750 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection pressure [bar] 2019 Electric-hydraulic equipment Nominal power of the pump motor [kW] 23 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 9.60 Dimensions (L x W x H) [m] 5.54 x 1.86 x 2.20

Closing unit Clamping force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2480 Injection weight [g] 2254 Electrical and hydraulic equipment Rated power of the pump motor [kW] 55 Heater power [kW] 62

Screw diameter [mm] 22 Injection volume [cm3] 22.8 Injection weight [g] 20 Injection pressure [bar] 2400 Electric-hydraulic equipment Nominal power of the pump motor [kW] 7.5 Heater power [kW] 3.7 Dimensions and weight Net weight with control cabinet [t] 2.6 Dimensions (L x W x H) [m] 3.20x1.30x1.80 m

Clamping force [kN] 500 min./ max. mold height [mm] 200 Maximum opening width [mm] 450 injection unit Screw diameter [mm] 20 Injection volume [cm3] 31 Injection weight [g] 29 Dimensions and weight Net weight with control cabinet [t] 3.05 Dimensions (length x width x height) [m] 2.20 x 2

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping force 6500 kN Tool opening force, max. 346 kN The size of the plates (height x height) 1620 x 1470 mm clearance between columns (height x height) 1000 x 930 mm mold opening path 1150 mm mold mounting height min. Opening width 540 mm 1690 mm Ejector stroke 250 mm Ejector force forward / reverse 226 kN Injection unit Screw diameter 90 mm Ls / D ratio 20 Injection pressure 1742 bar shot weight 1742 g Plasticizing flow max. 83 g / sec nozzle pressure 173 kN Electro-hydraulic devices Rated power of the pump motor 90 kW Installed heating power of 36 kW Cylinder heating control zones 7 Oil filling 1240 ltr. Dimensions and weights Space requirement approx. 9.06 x 2.85 x 2.60 m Gross weight is 30,870 kg Tool weight 11400 kg

KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Height of the form [mm] -600 Max. mold height [mm] -1150 Column spacing (hxv) in the light (mm) - 1000 x 930 Mounting plates size - 1490 × 1440 Ejector stroke (max) [mm] -250 Screw diameter [mm] -90 Injection weight [g] -2500 Oil quantity [liter] -1000 Injection sequence in mold -2 Number of hydraulic cores S / R- 0/2 The maximum distance between the plates [mm] -1500

Clamping force [kN] 650 Clearance between columns (hxv) [mm] 370 x 320 min./ max. mold height [mm] min 225 Maximum opening width [mm] 675 injection unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection pressure [bar] 2042 Electric-hydraulic equipment Nominal power of the pump motor [kW] 11 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.6x1.4x2.0 m

Clamping/injection matrix Clamping force [kN] 6500 Mounting plate dimensions (hxv) [mm] 1465 x 1360 Clearance between columns (hxv) [mm] 1025 x 930 Min./max. mold height [mm] 450 / 950 Maximum opening width [mm] 1350 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1193 Shot weight [g] 1085 Dimensions and weight (approximately) Net weight with control cabinet [t] 33 Dimensions (L x W x H) [m] 8,3x2,5x2,33

Closing unit Closing force [kN] 10000 Clearance between columns (hxv) [mm] 1400 x 1150 Min./ max. mold height [mm] 492 - 1092 Maximum opening width [mm] 2292 Injection unit Screw diameter [mm] 105/30mm Injection volume [cm3] 3053/100 Injection weight [g] 2775/90.9 Electric-hydraulic equipment Pump motor power [kW] 75 Heater power [kW] 45 Machine equipped with magnetic tables. Robot: KUKA KR60 L30-3 KS-F

Clamping force [kN] 400 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 320 x 320 Min./max. mold height [mm] min 150 Maximum opening width [mm] 475 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82

Clamping force [kN] 600 Clearance between columns (hxv) [mm] 370 x 320 Min./max. mold height [mm] min 200 Maximum opening width [mm] 650 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 41,8 Shot weight [g] 38 Injection pressure [bar] 2863 Dimensions and weight (approximately) Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 3,39 X 1,89 X 1,24

Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156 Shot weight [g] 142 Injection pressure [bar] 2429 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02

Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 x 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156