injection used for sale

Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump diesel engine 6 cylinders -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 2x injection pump available -Price per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: 1078 cc - Injection weight: 981g - Tool closing system: 3500/... - Closing force: 350 t - Tool plate dimensions: 1010 x 1010 mm - Clearance between columns: 710 x 710 mm - Tool height: 300...710 mm - Opening distance: 670 mm - Max. Distance of plates: 1380 mm General information: - Dimensions (m) LxWxH: 7.60 x 1.80 x 2.40 m - Weight: 15,300 kg ROBOT - Year 2005

Machine dimensions Length 5840mm Width 1420mm Height 2180mm Weight 6600 kg Closing system Knee closure type Clamping force 210 t Ejector stroke 100 mm Mold height max 600 mm Mold height min 200 mm Clearance between columns 500 x 500 mm Injection system Screw diameter 52 mm Max injection pressure 175 MPa Max injection volume 548g Max injection speed 170 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push Robot connection Optional Apex robot Vickers hydraulic valves CNC control

Machine dimensions Length 4700mm Width 1300mm Height 1980mm Weight 1300 kg Closing system Knee closure type Clamping force 120t Ejector stroke 100 mm Mold height max 400 mm Mold height min 150 mm Clearance between columns 410 x 410 mm Injection system Screw diameter 41 mm Max injection pressure 158 MPa Max injection volume 188g Max injection speed 84 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

Machine dimensions Length 3900mm Width 1200mm Height 1900mm Weight 3200 kg Closing system Knee closure type Clamping force 90t Ejector stroke 750 mm Mold height max 350 mm Mold height min 125 mm Clearance between columns 360 x 360mm Injection system Screw diameter 31 mm Max injection pressure 216 MPa Max injection volume 120g Max injection speed 53 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

PVC injection system - Ø 50     injection weight: 540 g     clamping force: 188 kN     distance between columns: 510x470 (retractable columns)     five-point knee system     self-lubricating knee bushes     additional PE injection system     reinforced snails (bimetal)     Techamtion controller, in it m / n: memory mold settings, multi-stage pressure and injection setting     hydraulics: Rexrot variable displacement pump     T-slots on the plates     3 pull-out cores, hydraulic unscrewing device     rotameter 4 + 4     mold temperature stabilizer set     short working time - low consumption     manufacturers documentation, service in Poland

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Stork S6600-5650 injection molding machine Year of production: 2011 Total installed power: 90 kW Max. injection speed: 500 mm / s Max. injection pressure: 1650 bar Screw diameter: Ø84 mm Max. shot weight for PP: 2042 g Mold closing force: 6600kN Clearance between H x V columns (↔ x ↕): 900 x 900 mm Mold height min: 300 mm Max. mold height: 900 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 680 mm Centering rings diameter: 200 mm Max. ejector stroke: 300 mm Dimensions of the mold mounting plates H x V: 1370 x 1370 mm Aggregate volume: 4527g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

FERROMATIK KTEC 110S Year of manufacture: 2003 Injection unit: 493 Screw diameter: 40 mm Screw length L / D: 20 Theoretical injection volume: 201 cm³. Maximum injection pressure: 2240 bar Max. injection rate: 570 cm³ / s Max. screw rotation speed: 260 min-1 Closing unit Clamping force : 1110 kN Min. mould thickness: 250 mm Max. opening stroke: 550 mm Max distance between platens: 800 mm Distance between tie bars: 470 x 470 mm Platen size: 690 x 690 mm General Pump motor power: 22 kW Heating power: 12.7 kW Total installed power: 31 kW Oil quantity: 290 l. Dimensions (length x width x height) : 5 x 1.6 x 2 m. Weight : 5500 Kg Visible without power Press failure, CPU problem. Option : Pressure accumulator 2 hydraulic cores 2 pneumatic valves Euromap 12

Robotic - NO Control - B4 Screw diameter - 75 [mm] Specific injection pressure - 1739 [bar] Injection volume - 1657 [cm3] Injection weight - 1508 [g] Injection unit - 2800 [mm] Closing force - 4500 [T] Tool Locking System - Knee System Tool plate size - 1120 [mm] Clearance between columns - 800 [mm] Opening distance - 760 [mm] Maximum distance between plates - 1530 [mm] Ejector stroke - 250 [mm] Pump capacity - 55 [kVA] Tank heating system power - 43 [kVA] Controls and description - ENGLISH Full documentation - YES Hours worked - 76 200 Pickup date - 6 months Dimensions (length x width x height) - 8255 x 1795 x 2330 [mm] Weight - 20 400 [kg] The machine has a new cooler, hydraulic accumulators. The pump is regenerated. The machine will be available in February 2021.

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

Arburg 320 C 500-270 injection moulding machine Year of production: 2007 Control type: Selogica Clamping System: Hydraulic TECHNICAL DATA Closing force: 500 kN Clearance between columns: 320 mm x 320 mm Plate dimensions: 446 mm x 446 mm Mould size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 35 mm Injection Volume / Injection Weight: 115 ccm / 105 gram PS Injection pressure: 1470 bar GENERAL DATA Motor: 11KW Heaters: 9.5 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 2400 kg

Clamping unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 50 Injection volume [cm3]: 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Closure method Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./ max. mould height [mm] min 225 Maximum opening width [mm] 575 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical-hydraulic equipment Pump motor rated power [kW] 15 Heater power [kW] 8,4 Dimensions & Weight Net weight with control cabinet [t] 2.25 t

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Clamping unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./ max. mould height [mm] 300-710 Maximum opening width [mm] 1380 Injection Unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions & Weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7,60 x 1,80 x 2,40

Clamping unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./ max. mould height [mm] min 480 Maximum opening width [mm] 1650 Injection Unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 59 Dimensions & Weight Net weight with control cabinet [t] 26.3 Dimensions (L x W x H) [m] 7.98 x 2.35 x 2.51m

Clamping unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./ max. mould height [mm] min 350 Maximum opening width [mm] 1200 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical-hydraulic equipment Pump motor rated power [kW] 37 Heater power [kW] 19,8 Dimensions & Weight Net weight with control cabinet [t] 19

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Clamping unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection Unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Heater power [kW]: 6.5 Dimensions & Weight Net weight with control cabinet [t] 3.18 Dimensions (LxWxH) [m] 4.3 x 1.7x 1.8

Clamping unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./ max. mould height [mm] 200 Maximum opening width [mm] 730 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g]: 95 Injection pressure [bar] 2042 Dimensions & Weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Clamping unit Clamping force [kN] 550 Dimensions of mounting plates (hxv) [mm] 530 x 500 Clearance between columns (hxv) [mm] 360 x 355 Min./ max. mould height [mm] min 150 Maximum opening width [mm] 500 Injection Unit Screw diameter [mm] 32 Injection volume [cm3] 75,5 Injection weight [g] 69,54 Injection pressure [bar] 1030 Dimensions & Weight Net weight with control cabinet [t] 2,25 Dimensions (L x W x H) [m] 3.25 x 1.09 x 2.04

Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Screw diameter: 60 mm Screw length: 25D Injection volume: 763 cm3 Injection pressure: 2106 bar Motor power: 135 kW Heating power: 27.9 kw Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m robot interface Bi-metal 2 blowguns, 3 batteries on injection, 16 hot channels

Krauss Maffei KM 390-160 CZ Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 400 Maximum opening width [mm] 1000mm Injection unit Screw diameter [mm] 40 Injection volume [cm3] 204 Injection weight [g] 186 Injection pressure [bar] 1860 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 21 Dimensions and weight Net weight with control cabinet [t] 7 Dimensions (length x width x height) [m] 4.5 x 1.5 x 3.7

Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volume: 1480 cm³ Shot weight: 1360 g Min.height of the fastening plate: 1230 mm Min.width of the fastening plate: 1230 mm The distance between the columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Oil tank capacity - 1500 liters Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22,000 kg Machine with a robot and a cage

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 800 x 800 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] 220-520 Maximum opening width [mm] 970 Injection unit Screw diameter [mm] 55mm Injection volume [cm3] 522 Injection weight [g] 595 Injection pressure [bar] 1943 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 22.6 Dimensions and weight Net weight with control cabinet [t] 9.8 Dimensions (L x W x H) [m] 5.65 m x 1.45 m x 2.10 m

Engel ES 1350/250 HL injection molding machine Year of production - 1997 Closing unit: closing force: 2500 kN size of forming plates h: 1050 mm size of forming plates v: 650 mm min. mold height: 350 mm opening distance: 1200 mm opening stroke: 850 mm ejector stroke: 200 mm ejector force: 82 kNj Injection system: Screw diameter - 55 mm Injection volume - 618 cc Injection weight - 556 g number of heating zones: 5 nozzle stroke: 50 technical data of the robot-system Robot Engel Year of construction: 1997 handling weight: 10 kg X axis: 500mm Y axis: 1000mm Z axis: 2360mm

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] 300/600 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 229 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 15.5 Dimensions and weight Net weight with control cabinet [t] 7.7 Dimensions (L x W x H) [m] 5 X 1.6 X 2

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] 275 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 182 Injection weight [g] 153 Injection pressure [bar] 2120 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 10.2 Dimensions and weight Net weight with control cabinet [t] 5.1 Dimensions (length x width x height) [m] 4.45x1.49x2.17 Additional equipment: Dryer Picker

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 275 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 231 Injection weight [g] 210 Injection pressure [bar] 1680 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 10.2 Dimensions and weight Net weight with control cabinet [t] 4.41 Dimensions (length x width x height) [m] 4.6x1.6x2.17 Additional equipment: Dryer Picker

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907 x 910 Clearance between columns (hxv) [mm] 630 x 630 Min./max. mold height [mm] 460-800 Maximum opening width [mm] 1310 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 456 Injection pressure [bar] 1890 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (L x W x H) [m] 6.95 x 2.075 x 2.48

Closing unit Clamping force [kN] 550 Dimensions of mounting plates (hxv) [mm] 530 x 500 Clearance between columns (hxv) [mm] 360 x 355 Min./max. mold height [mm] min 150 Maximum opening width [mm] 500 Injection unit Screw diameter [mm] 32 Injection volume [cm3] 75.5 Injection weight [g] 69.54 Injection pressure [bar] 1030 Dimensions and weight Net weight with control cabinet [t] 2.25 Dimensions (L x W x H) [m] 3.25 x 1.09 x 2.04

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min. 300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20

Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2

Arburg 470C 1500-350 injection molding machine Year of manufacture: 2005 Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min. 250 injection unit Screw diameter [mm] 35 Injection weight [g] 127 Injection pressure [bar] 2500 Electric-hydraulic equipment Nominal power of the pump motor [kW] 25 Heater power [kW] 16.9 Dimensions and weight Net weight with control cabinet [t] 4.56 Dimensions (L x W x H) [m] 4.60 x 1.70 x 1.80

Short circuit force [kN] 9500 Dimensions of fastening plates (hxv) [mm] 1960 x 1710 Clearance between columns (hxv) [mm] 1400 x 1150 Min./ max. mold height [mm] 500-1200 Maximum opening width [mm] 1900 Injection unit Screw diameter [mm] 105 Injection volume [cm3] 4546 Injection size [g] 4137 Injection pressure [bar] 1778 Electric-hydraulic equipment Pump motor rated power [kW] 110 Heater power [kW] 57 Dimensions and weight Net weight with control cabinet [t] 56 Dimensions (L x W x H) [m] 11.23 x 3.42 x 2.61

Battenfeld Microsystem 50 injection molding machine Year of production - 2001 Unilog B4 control technical data of the clamping unit, clamping force: 50 kN size of mold plates h: 364 mm mold plate size v: 196 mm min. mold height: 100 mm max. open daylight: 300 mm opening stroke: 200 mm technical data of the injection unit screw diameter: 14 mm injection volume: 1.1cc injection pressure: 2,500 bar measures and weight machine dimensions lxbxh: 1.862 m x 0.81 m x 2.428 m total weight: 1050KG

Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] 300/650 Maximum opening width [mm] 1050 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 322 Injection pressure [bar] 2080 Electrical and hydraulic equipment Rated power of the pump motor [kW] 37 Heater power [kW] 16.8 Dimensions and weight Net weight with control cabinet [t] 8.5 Dimensions (length x width x height) [m] 5.43m x 1.88m x 2.2m Additional equipment: 2 x Conveyor belt Safety cage Wittmann W621-1449 robot (X=590mm, Y=1200mm, Z=2500mm)

Battenfeld BA 1000/200 CDC Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 640 x 590 Clearance between columns (hxv) [mm] 370 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 175.9 Injection weight [g] 160 Injection pressure [bar] 1137 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11.2 Heater power [kW] 7.88 Dimensions and weight Net weight with control cabinet [t] 4.3 Dimensions (L x W x H) [m] 4.4 x 1.8 x 1.8

Battenfeld TM 750/210 Closing unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./max. mold height [mm] 200 Maximum opening width [mm] 730 Injection unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g] 95 Injection pressure [bar] 2042 Dimensions and weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Krauss Maffei KM 300 – 1900 C2 injection molding machine Year of manufacture -2000 Control : MC4 Closing unit Clamping force: 3000 kN Mold opening force, max.: 160 kN Sliding force of the moving plate Opening: 86 kN Sliding force of the moving plate Closing: 68 kN Mold plate size (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Min. mold height: 330 mm mold height: 1150 mm Hydraulic ejector - stroke: 200 mm Forward/reverse ejection force: 58/28 kN injection unit Screw diameter: 70mm Ls/D ratio: 20 Injection pressure: 1778 bar Displacement: 1047 cc Shot weight, PS: 953 g Injection speed: 400cc/sec Screw speed: 218 1/min Plasticizing capacity max.: 75 g/s Nozzle pressure: 110 kN Electrical and hydraulic equipment Pump motor nominal capacity: 55 kW Installed heating power: 30 kW Adjustable barrel heating zo ...

Clamping force [kN] 3000 Clearance between columns (hxv) [mm] 720 x 720 min./ max. mold height [mm] 400-1100 Maximum opening width [mm] 700 injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 680.9 Injection pressure [bar] 2100 Centering ring diameter 120 / 160 mm Core movable plate - 2 pcs Air valve - 8 pieces Euromap 12 Oil tank 445 ltr

Supplied with magnetic plates for assembly of molds Krauss Maffei KM 3200-17200 MX Injection molding machine Year of production - 2006 Clamping force - 32,000 kN The dimensions of the boards - 2270 X 1820 mm Clearance between columns - 1100 X 2000 mm Screw diameter - 135 mm Specific injection pressure - 1784 bar Injection weight - 6860 g Injection volume - 9662 ccm The machine is to be picked up in December 2022 Machine without robot Worked - 62,000 man-hours The amount of oil - 2400 liters Dimensions: 16.04 X 5.21 X 4.07 m Weight - 240 tons

Demag Extra 100-430 injection molding machine Year of manufacture -2004 NC control 4 Clamping force - 1000 kN Column spacing - 400X400 mm The dimensions of the boards are 540X540 mm Min. mold height - 250 mm Screw diameter - 40 mm Injection weight - 208 g Injection volume - 231 cc Injection pressure - 2025 bar Hydraulic cores - 1 Air valves - 1

Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1155x1195 Clearance between columns (hxv) [mm] 800x800 Min./max. mold height [mm] min 425/max 770 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 75 Injection volume [cm3] 1657 Injection weight [g] 1506 Injection pressure [bar] 1739

Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 x 1250 Clearance between columns (hxv) [mm] 1120 x 1000 min./ max. mold height [mm] 600 - 2000 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 130 Injection volume [cm3] 6172 Injection weight [g] 5617 Injection pressure [bar] 1296 Dimensions and weight Net weight with control cabinet [t] 55 Dimensions (L x W x H) [m] 10.50 m x 2.65 m x 2.40 m

Arburg 420c 1000-250 Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 6.5 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (L x W x H) [m] 4.3 x 1.7 x 1.8

Clamping/injection matrix Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Shot weight [g] 1304 Injection pressure [bar] 1829 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 36 Dimensions and weight (approximately) Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6,91 m x 2,20 m x 2,41 m