We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,997 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ″ control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 55 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2000 kN - Mold opening force: 101 kN - Mounting plate dimensions (h x v): mm 915 x 915 - Clearance between columns (h x v): mm 560 x 560 - Mold opening stroke: mm 700 - Minimum mold height: mm 350 - Opening width: mm 1050 - Ejector stroke: mm 200 - Ejector force forward / reverse: 58/28 kN Injection unit - Screw diameter: mm 55 - Ls / D ratio: - 20.0 - Injection pres ...
used
Battenfeld HM 500/5100 injection molding machine Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1470 x 1260 Clearance between columns (hxv) [mm] 900 x 720 Min./max. mold height [mm] min 450 Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 85 Injection volume [cm3] 2412 Injection weight [g] 2195 Injection pressure [bar] 2110 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 37.3 Dimensions and weight Net weight with control cabinet [t] 26 Dimensions (L x W x H) [m] 6.9 x 2.4 x 3 m Instrumentation: EUROMAP 67 robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving plate 8 x hot runner controls bimetal injection system ejection plate
used
Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000
used
Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12
used
Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12
used
Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12146 h Runhour! Control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot
used
Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12757 h Runhour! Control: Unilog 9000 C year of manufacture: 1996 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot
used
A unique opportunity without intermediaries for people who want to become self-employed in the field of plastic injection molding! As of 1.3.24, we are actively discontinuing our activities in owner-managed plastic injection molding. We have been active in this field for several decades, both for our own products made of thermoplastics (ABS / POM / PC / glass fiber reinforced PA ), as well as on a contract basis for renowned companies. For sale we offer our small plastic injection moulding shop (without real estate and fixed building installations) as a whole - with currently 2 fully hydraulic Aarburg injection moulding machines type Allrounder 320-210-750 and 320-210-850 as well as all peripheral devices - all from well-known brand manufacturers, such as 2 Thermolift Arburg 100-2, various conveyor belts, various temperature control units oil and water, chiller for the cooling circuit ...
used
Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...
used
SANDRETTO MEGA T 4435/610 injection moulding machine (1998) 610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw length (LD): 21 Maximum injection capacity: 746 cm3/1” Laminating capacity: 86 g/1” Pressure on material: 1548 bar Closing force: 610 tons. Variable displacement engine torque: 5570 Nm. Screw speed: 153 RPM Screw hydraulic motor power: 120 HP Injection group stroke: 725 mm. Heating zones: 4+nozzle. Total heating power: 38 kW. Mold locking force: 5985 kN Mold thickness min/max.: 300/1000 mm. Mobile plane stroke: 930 mm. Plate dimensions: 1270 x 1270 mm. Column passage: 850 x 850 mm. Column diameter: 160 mm. Extraction force: 103 kN Puller stroke: 350 Vacuum cycles: 10-11 n/1” Hydraulic circuit pressure: 160 bar Oil tank capacity: 850 l. Electric motor powe ...
used
Production year: 2004 Injection unit: .../500 Screw diameter: 40 mm Specific injection pressure: 2019 bar Injection volume: 251 ccm Injection weight: 239 g Tool closure system: 120/... Clamping force: 120 t Tool plate dimensions: 740 x 680 mm Distance between columns: no columns mm Tool height: 300 mm Opening distance: 500 mm Max.Distance plates: 800 mm Ejector stroke: 130 mm General data: Pickup date: Immediately Dimensions (m) LxWxH: 5,1 x 1,5 x 2,1 m Weight: 7600 kg Instrumentation: - 2 x pneumatic valve - hot runner connection - bimetallic injection system - we have to the Picker machine
used
Injection moulding machine Demag Ergotech 5000-5200 Parameters: Production year: 2001 Control: NC10 Injection unit: .../5200 Screw diameter: 95 mm Specific injection pressure: 1550 bar Injection volume: 2835 ccm Injection weight: 2550 g Tool closure system: 5000/... Clamping force: 500 t Tool plate dimensions: 1300 x 1200 mm Distance between columns: 900 x 800 mm Tool height: 400...880 mm Opening distance: 810 mm Maximum plate distance: 1690 mm Ejector stroke: 230 mm General data: Dimensions (m) LxWxH: 9,40 x 2,30 x 2,50 m Instrumentation: 6 x pneumatic cascade 2 x Hydraulic Core
used
Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...
used
For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...
used
Arburg 570C 2200-1300 Injection Molding Machine / Hybrid Machine Production year : 2005 Injection system : Screw diameter: 60 mm Injection weight: 558 g Injection pressure: 2000 bar Dosing volume: 664 ccm Locking system : Clamping force: 220 tons Distance between columns: 570x570 mm Size of mounting plates: 795x795 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control system: SELOGICA Additional equipment: Hybrid machine: fast, energy-efficient Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Machine Main Motor--Inverter Driven Servo Motor--Energy Saving Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m
used
Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg
used
Electric Injection Molding Machine ! Clamping unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection Unit Screw diameter [mm] 35 Injection volume [cm3]: 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions & Weight Net weight with control cabinet [t] 5,7 Dimensions (L x W x H) [m] 4.7 x 1.4 x 2.7
used
Key data: 2100 kN, 45 mm
warehouse no.: 502923 manufacturer: BATTENFELD type: TM 2100-750+350V controller: UNILOG B4 year of construction: 2003 clamping force: 2100 kN distance between tie-bars h x v: 570 x 570 mm size of mould plates h x v: 840 x 840 mm min. mould height: 350 mm max. mould height: 700 mm max. open daylight: 1230 mm opening stroke: 530 mm horizontal injection unit: screw diameter: 45 mm swept volume: 358 ccm injection pressure: 2116 bar 2nd vertical injection unit: screw diameter: 35 mm swept volume: 169ccm injection pressure: 2083 bar equipment included: 8x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x core pulling hydraulically 3x air valve 1x machine incl. water flow regulator machine without material hopper needle shut-off-nozzle Anti vibration mounts electric interface for handling units according to Euromap 12 ...
used
2005 model little used Very clean plastic injection machine Injection molding machine Engel Victory 500/150 Pro Tech Closing force - 150 tons Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 Injection volume - 251 ccm Min/Max mold thickness: 300 Jacks: 1 Euromap: 500/120 Moving floor movement: 507 Min/Max die height - 300/900 mm Machine weight - 9600 kg Opening path - 600 mm Injection pressure - 1302 bar Machine with robot and safety cage Injection size - 231 g Roller dimensions - 750X520 mm Oil tank capacity - 450 liters
used
Key data: 1200 kN
Wittmann Battenfeld Smart Power 120/525 / hybrid machine / operating hours: approx. 20,000 in automatic mode Year of construction:2017 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 520x470 mm Size of clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B8 - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 20,000 in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Proportional valve on the injection unit – precise injection It is possi ...
used
Key data: 900 kN
Wittmann Battenfeld Smart Power 90/350 / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 35 mm Spray weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 90 t Tie bar spacing: 470x420 mm Size of clamping plates: 680x660 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 24,000 in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Proportional valve on the injection unit – precise injection It is possib ...
used
Key data: 500 kN
Battenfeld TM 500/210 Year of construction: 2002 Injection unit: Screw diameter: 30 mm Spray weight: 96.5 g Injection pressure: 2042 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Central lubrication Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.51x1.18x1.63 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...
used
Key data: 450 kN
Battenfeld HM 45/60S / Machine in very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 18 mm Injection weight: 20.8 g Spray pressure: 2593 bar Dosing volume: 22.9 ccm Clamping unit: Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 37,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating capacity: 3.3 kW Total power: 14.3 kW All offered machines are started by our service tec ...
used
Key data: 50 kN
Wittmann Battenfeld MicroPower 5/7.5 / Electric Machine Year of construction: 2012 Injection unit: Screw diameter: 14 mm Injection weight: approx. 2.5 g Injection pressure: 2500 bar Dosing volume: 3 ccm Clamping unit: Clamping force: 5 t Size of clamping plates: 240x400 mm Ejector: electric Control: UNILOG B6 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Built-in vacuum pump from the Becker brand Automatic height adjustment of the injection unit Metrics: Weight: 1370 kg Length/Width/Height: 2.09x0.97x2.50 m Drive: Heating capacity: 2.45 kW All offered machines are started by our service te ...
used
Key data: 1100 kN
Krauss Maffei KM 110-700 C2 Year of construction: 1998 Injection unit: Screw diameter: 45 mm Spray weight: 278 g Injection pressure: 2336 bar Dosing volume: 305 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Parallel Movements Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) The machine was regularly serviced by the authorized service Krauss Maffei in Switzerland Metrics: Weight: 6200 kg Length/Width/Height: 4.66x1.51x2.19 m Drive: Pumps/motor: 18.5 ...
used
Key data: 1000 kN
Demag Ergotech Extra 100-310 / Machine in very good technical condition Year of construction: 2005 Injection unit: Screw diameter: 35 mm Spray weight: 152 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 400x400 mm Size of clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC 4 Additional equipment: Operating hours: approx. 25,000 Air valve x 2 Hydraulic core pull x 1 pair Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Metrics: Weight: 4100 kg Length/Width/Height: 4.05x1.27x1.99 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected mach ...
used
Key data: 2600 kN
Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...
used
Key data: 2600 kN
Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 26,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 26,000 in automatic mode Total number of operating hours: 30,323 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...
used
Key data: 250 kN
Arburg 221KS 250-75 / Universal machine Year of construction: 1999 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spraying pressure: 1500 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 25 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core Pull Control Injection unit hardened - Bimetal Tension clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selec ...
used
Key data: 400 kN
Arburg 1200T 400-150 / Vertical injection moulding machine with rotary table Year of construction: 2003 Injection unit: Screw diameter: 35 mm Spray weight: 89 g Spray pressure: 1620 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 0x0 mm Size of clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Turntable diameter: 1200 mm Air valve x 3 Hydraulic core pull x 3 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Parallel Movements Protective housings are opened automatically It is possible to change the screw diameter for fi 40 mm The machine has an additional control panel - control by remote control Original tool crane The machine was serviced by the authorised service company Arburg in Germany ...
used
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann WP80 sprue picker Year of construction: 2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection A new injection unit is installed in the machine Built-in conveyor belt and sorting flap Sprue Picker Wittmann WP80 Year of construction: 2016 Travels in axes: X-100, Y-550, Z-90° Touch control panel Purchase of the sprue picker for an extra charge Metrics: Weight: 2400 kg Length/Width/Height: 3.41x1. ...
used
Key data: 1000 kN
Arburg 420C 1000-290 with the Wittmann W811 robot Year of construction: 06/2010 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 2 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot at an ad ...
used
Closing unit Clamping force [kN] 10000 Dimensions of mounting plates (hxv) [mm] 2000 x 1605 Clearance between columns (hxv) [mm] 1550 x 1200 Min./max. mold height [mm] 500 / 1300 Maximum opening width [mm] 2400 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2799 Injection weight [g] 2407 Injection pressure [bar] 2300 Electrical and hydraulic equipment Rated power of the pump motor [kW] 150 Heater power [kW] 44.1 Dimensions and weight Net weight with control cabinet [t] 52000 Dimensions (length x width x height) [m] 10.45 x 3.18 x 2.82 Injection molding machine included with the Apex robot
used
Closing unit Clamping force [kN] 3300 Dimensions of mounting plates (hxv) [mm] 1040 x 950 Clearance between columns (hxv) [mm] 710 x 630 Min./max. mold height [mm] 330/710 Maximum opening width [mm] 1385 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1039 Injection weight [g] 940 Injection pressure [bar] 1400 Electrical and hydraulic equipment Rated power of the pump motor [kW] 63.3 Heater power [kW] 27 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (length x width x height) [m] 6.5 x 3.8 x 2.3 Side unit: screw diameter 35mm injection weight approximately 150g
used
Battenfeld HM 60/350S injection molding machine – year of production 2008 – 41421h number – working hours worked. Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 550 x 530 Clearance between columns (hxv) [mm] 370 x 320 injection unit Screw diameter [mm] 35 Injection volume [cm3] 169 Injection weight [g] 153.8 Injection pressure [bar] 2083 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 10.4 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.79x1.24x1.88 – control b6
used
Netstal SynErgy 1500-600 injection molding machine year of production 2003 – 45kW engine – maximum clamping force 1500kN – injection unit 600 – screw diameter 50mm – injection volume 353 cc – injection weight 339 g – injection pressure 1890 bar – hydraulic ejector on the movable plate – hydraulic core on the movable plate – hydraulic core on a fixed plate – two air valves – mold height 250-550mm – mold opening stroke 0-450mm – spacing between columns 460 X 460 mm – weight of the machine 11,200 kg
used
-KM 110-380 CX PVC - Mold clamping force: 1100 kN - Mold opening force: 70 kN - Mounting plate dimensions (H x W): 745 x 770 mm - Clearance between columns (H x W): 470 x 470 mm - Mold opening stroke: 600 mm - Minimum mold height: 300 mm - Opening width: 900 mm - Ejector stroke: mm 150 - Ejector force forward / backward: 22.6 / 9.8 kN Injection unit - Screw diameter: 35 mm - Ls / D ratio: - 22.9 - Injection pressure: 2429 bar - Injection volume: cm3 154 - Injection weight 1): 140 g - Injection capacity: cm3 / s - Screw rotation speed, standard speed 390 - Plasticizing capacity 1): - with standard screw speed: g / s 22.1 Electrical and hydraulic equipment - Pump motor rated power: kW 19 - Installed heater power: kW 10.9 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2): s / mm 2.1 / 329 - Oil tank capacity: dm3 489 Dimensi ...
used
Netstal S 600-230 injection molding machine year 2007 Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 617 x 600 Clearance between columns (hxv) [mm] 410 x 410 min./ max. mold height [mm] 200 - 500 Maximum opening width [mm] 540 injection unit Screw diameter [mm] 32 Injection volume [cm3] 123 Injection weight [g] 118 Injection pressure [bar] 1890
used
Demag Concept 300-630/2300 injection molding machine Year of production - 2006 Clamping force - 3000 kN Spacing between columns - 950 X 950 mm Table size - 630 x 630 mm screw diameter - 80 mm injection volume 1583 cc injection weight - 1430 g injection pressure - 1437 bar machine weight - 14,600 kg dimensions of the machine 6.5 x 1.9 x x 2.3 m number of man-hours worked 75299 Screw 80 mm hardened (good condition) RSP revised in 2022 2021 injection system has been completely sealed 2019 the pump along with the control valve and Hall sensor has been completely revised
used
Two twin machines available Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a return lock and an open nozzle. Closing system: Clamping force: 5000 kN Mold opening force, max.: 280 kN Movable pressure plate Sliding force Opening: 137 kN Movable pressure plate Sliding force Closing: 116 kN Mold plate size (hxv): 1270mm x 1200mm Distance between columns (hxv): 900 mm x 800 mm Mold opening stroke: 1170 mm Min. mold height: 480 mm Maximum opening path: 1650 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejection force: 92548 kN injection unit Screw diameter: 90 mm Injection pressure: 1742 bar Injection volume : 1953 cm³ Injection weight, PS: 1777 gr Injection rate: 649cc/sec Screw spee ...
used
Arburg 470C 1500-400 injection molding machine Control: SELOGICA Tool closing system: Closing force: 150 t Clearance between columns: 470×470 mm Maximum table plate dimensions: 650×650 mm injection unit: Screw diameter: 45 mm Injection Weight: 232g Injection pressure: 1580 bar Injection volume: 254cc Equipment: Ejector: hydraulic Closing system: hydraulic 1 x hydraulic core Machine dimensions and weight: Weight: 4850 kg Length/Width/Height: 4.45×1.59×2.08 m Power: Pump/Motor: 18.5 kW Heaters: 9.4 kW Total: 27.9kW
used
Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 kN -The clearance between the columns vertical: 420 mm -The clearance between the columns pos: 420 mm -Size plates of the table pos: 650 mm -Dimension of the vertical table plates: 650 mm -Mold height min: 275 mm -Plate spacing: 850 mm -Opening path: 575 mm -Ejector: 175 mm -Ejection: 40 kN Injection Specifications: -Screw diameter: 55 mm - Injection volume: 353 ccm -Injection pressure: 2080 bar - Screw rotation speed: 59 min -Worm torque: 880 N - Air injection rate: 214 g / s PS -1 hydraulic core -Hydraulic ejector Dimensions and weight: -Dimensions in: 4.82m x 1.48m x 2.18m -Total weight in: 5400KG
used
Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...
used
Arburg 320K 700-250 injection molding machine Year - 03/2004 PP materials used CLOSING UNIT Closing force (Ton) 70 Space between columns (mm) 320 × 320 Column diameter (mm) 60 Plate size (H x V) (mm) 476 × 476 Mold Height (Max.- Min) (mm) 400-200 Space between plates (mm) 650 Closing speed (mm / s) 88 (l / min) Opening stroke (Max) (mm) 250 Ejection force (kN) 30 Opening stroke (mm) 70 Cores (YES / NO) NO INJECTION UNIT Screw diameter (mm) 35 Injection weight (Max) (Material) (g) 121 Volume (cm3) 144 Injection pressure (bar) 1820 Injection rate (cm3 / s) 154 Nozzle force (Max) (Ton) 70 Nozzle stroke (Max) (mm) 240 Plasticization efficiency (g / s) 141 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37 × 1.405 × 1.99 Total energy consumption (Kw) 35 Robot Manufacturers ...
used
MC5 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Mold clamping force: 1760 kN - Mounting plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Way of opening the mold max: mm 450 - Height of the mold development min./max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: 49 kN Injection unit - Screw diameter: mm 50 - Ls / D ratio: 20.2 - Injection pressure: 1892 bar - Injection volume: cm3 393 - Injection weight for PS: 357 g - Injection capacity: cm3 / s 314 - Number of screw revolutions, max: rpm 320 - Nozzle clamping force: 29.4 kN Electrical parameters - Connection value: kW 38 - Heaters power: kW 15.6 - Number of cylind ...
used
Borche BS150-III injection molding machine Year of production - 2015 Injection components: Screw diameter: 45 mm Injection Weight: 321g Injection pressure: 1850 bar Injection volume: 341cc Closure elements: Closing force: 150 t Clearance between columns: 460×460 mm Maximum table plate dimensions: 670×670 mm Ejector: hydraulic Closure system: knee Hybrid machine: energy-saving, high-speed, very quiet Euromap 67 robot interface air valve x 1 Hydraulic core string x 2 Central lubrication system The main motor - a servomotor controlled by an inverter It is possible to buy a Shini robot Dimensions: Weight: 4300 kg Length/Width/Height: 4.85×1.42×1.64 m Power: Pump/Motor: 15 kW Heaters: 9.6 kW Total: 24.6 kW
used
Arburg 570C 2200-1300 Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 664 Injection weight [g] 558 Injection pressure [bar] 2000 Dimensions and weight Net weight with control cabinet [t] 9.3 Dimensions (length x width x height) [m] 6.16x1.91x2.39 m Additional equipment: Hybrid machine: fast, energy-saving Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Main motor of the machine - servo motor driven by inverter - energy saving
used
Injection unit Injection pressure [bar] 1680 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 8 Dimensions and weight Net weight with control cabinet [t] 4.08 Dimensions (length x width x height) [m] 4.35m x 1.65m x 2.18m Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 230 Injection weight [g] 194 Additional equipment: Single-phase plastic feeder Picker
used
Krauss Maffei KM 450-3500 C3 Closing unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./max. mold height [mm] min 480 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical and hydraulic equipment Rated power of the pump motor [kW] 90 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 26.3 Dimensions (length x width x height) [m] 7.98 x 2.35 x 2.51m Pressure tank for increased injection power. The screw is driven by an electric motor Air core Hydraulic core 10 x rotameters Euromap 67
used
Engel injection moulding machine Type: CL 2550 / 350 SL, high-speed control: EC 100 A03 year: 2003 Clamping unit Clamping force t 350 Gap mm: 700 Holm dimension mm: min/max height of 735 x 735 mm: 250 / 660 Plate size: 1080 x 1080 injection unit Screw diameter mm: Gr 70 injection weight: 1050 Injection volume cm m³: 1193 Spray pressure bar: 2200 Dimensions and weights Machine weight kg: 22,000 Other High speed