injection used for sale

ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increase the efficiency of the e ...

ENGEL ES 80/50 HL injection moulding machine was built in 1996 in Austria by ENGEL Austria GmbH. The machine is designed for the efficient production of plastic components used both in everyday products and in many industrial sectors. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL ES 80/50 HL features, among others, a 25 mm diameter screw and a precision mould clamping system with a clamping force of 50 tonnes. Day-to-day operation of the machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of injection moulding process parameters. All this is complemented by an extremely rigid design that maintains  ...

B&A REF: 9343 TON: 110 SCREW DIAMETER: 35MM SHOT WEIGHT: 162 STROKE VOLUME: 178CM3 INJECTION PRESSURE: 1955AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440 MM MIN MOULD HEIGHT: 80MM MAX MOULD HEIGHT: 350MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 850MM EJECTOR STROKE: 125MM CONTROLS: TACTUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 15 SERVO HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE MOTOR: HYDRAULIC

B&A REF: 9341 TON: 550 SCREW DIAMETER: 90MM SHOT WEIGHT: 2365 STROKE VOLUME: 2600CM3 INJECTION PRESSURE: 1630AR PLATEN SIZES: 1310 X 1260MM DBTB: 900 X 800MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 34KW ROBOT: STYRAMA SERVO SCREW DRIVE: HYDRAULIC

B&A REF: 9340 TON: 130 SCREW DIAMETER: 40MM SHOT WEIGHT: 2015 STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 620 X 665MM DBTB: 410 X 460MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 420MM MAX DAYLIGHT: 920MM EJECTOR STROKE: 150MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9KW ROBOT INTERFACE: EUROMAP 67 ROBOT: WITTMANN BRIMUS 16 SCREW DRIVE: HYDRAULIC

B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE

B&A REF: 9330 TON: 1600 SCREW DIAMETER: 175MM SHOT WEIGHT: 16042 STROKE VOLUME: 17438CM3 INJECTION PRESSURE: 1843AR PLATEN SIZES: 2250 X 2100MM DBTB: 1850 X 1400MM MIN MOULD HEIGHT: 700MM MAX MOULD HEIGHT: 1600MM MOULD OPENING STROKE: 2700MM MAX DAYLIGHT: 3400MM EJECTOR STROKE: 350MM CONTROLS: MC5 CORE PULLING: 4 AIR VALVES: 2 MOTOR: 200 HEATING CAPACITY: 191KW ROBOT: KRAUSS BEAM SERVO SCREW DRIVE: ELECTRIC

Key data: 2700 kN, 29 g/PS

We offer this DESMA D 969.250 Z (S3) rubber processing machine in mint condition, built in 2021. Clamping force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive capacity: 72/39 l/min Pump drive current consumption: 32.0 A Pump drive power: 22 kW Nozzle application force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Hydraulic motor hours: 730 hours, Hydraulic pump (clamping force): 65 Hours, Operating System: active 3,360 hours Ideal for the production of: - Technical moulded rubber parts - Seals and O-rings - Automotive and industrial components Condition & Avai ...

A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible.

AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375

Specification Injection Moulding Machine Demag System 1300/1500-11500 General data Clamping force: 1300 t Year of Make: 2008 Control: NC4 Total connected load: 189 kW Weight: 86,700 kg Dimensions (L x W x H): 8.09 x 3.41 x 2.99 m + 6.25 x 2.58 x 2.99 m Clamping unit Size of the clamping plates: 2150 x 1880 mm Lights spar spacing: 1500 x 1250 mm Tool installation height: 700 - 1400 mm Opening travel: 1500 mm Max. panel spacing: 2900 mm Ejector force: 233 kN Ejector travel: 350 mm Injection Unit 11500 Screw diameter: 110 mm Spray volume: 5797 cc Injection weight in hp: 5200 g Spec. Spray pressure: 1971 bar L/D Screw Ratio: 24 Hydr. Drive power: 110 kW Cylinder heating capacity: 79.1 kW Facilities Hydraulic core pull: 4 Hydraulic cascades: 12 Hot runner control points (zones): 32 Robot Wittmann DR 853, built in 2014 (Z 3,500 / Y 2,500 / X 1,600 mm, C-axis ...

Specification Injection Moulding Machine Demag Ergotech 650/1000-3300 General data Clamping force: 650 t Year of Make: 2005 Control: NC4 Clamping unit Size of the clamping plates: 1450 x 1350 mm Clearance spar spacing: 1000 x 900 mm Tool installation height: 450 - 950 mm Opening travel: 930 mm Max. plate spacing: 1880 mm Ejector force: 96 kN Ejector travel: 300 mm Injection Unit 3300 Screw diameter: 80 mm Injection volume: 1779 ccm Injection weight in hp: 1600 g Spec. Spray pressure: 1855 bar L/D Screw Ratio: 20 Facilities Hydraulic core pull: 4 Hydraulic cascades: 8 Hot runner control points (zones): 16 Robot Wittmann W 843 Pro, built in 2021 (Z 3,000 / Y 2,000 / X 1,200 mm, C-axis servo 180°, B-axis servo 270°) included in the scope of delivery

Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 1x injection pumps available -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

Manufacturer: ENGEL Model: duo 1060H/330W/720 Combi US Type of Machine: Injection moulding machine 650ton Year of Manufacture: 2022 Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m, as recorded in source documents) - Weight 35000 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi, as recorded in source documents) - Cooling or heating water 4 (bar or psi, as recorded in source documents) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 14000 kN

Machine + Robot

Key data: 2000 kN, 359 g/PS, 50 mm

Arburg 570A-2000-800/170 Two-component hybrid injection moulding machine with sorting flap (247) Category: Injection moulding machines Brand: Arburg Number: 247 Availability: in stock Year of production: 2009 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Clamping force [kN]: 2000 Gap spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Minimum mould height [mm]: 400 Control Type: Selogica Tongue: English, German Working time [h]: 84609 Weight [kg]: 10.950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air Valve: 1x

Well used Krauss Maffei free loaded truck to return.

This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information.

Key data: 500 kN, 25 mm

Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direct Year of Make: 2013 Hours: 36163 h Clamping force: 500 kN Min. installation height: 200 mm Max. installation height: 550 mm Plate spacing max.: 302 mm Opening travel: 225 mm Size rotary table D: 900 mm Screw diameter: 25 mm Displacement: 59 cc Spray pressure: 2500 bar Equipment Screen text German Turntable Core pull hydraulic 1x Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 Handling Interface Interface EUROMAP 73 Ejector plate fuse interface Machine dimensions LxWxH: 3m x 1.6m x 3.48m Total weight: 3540 KG

Specification Injection Molding Machine Demag Systec Servo 420/820-2300 General data Clamping force: 420 t Year of Make: 2015 Control: NC5 Total connected load: 78 kW Weight: 21,000 kg Dimensions (L x W x H): 8.02 x 2.21 x 2.57 m Clamping unit Size of the clamping plates: 1200 x 1200 mm Clearance spar spacing: 820 x 820 mm Tool installation height: 380 - 825 mm Opening travel: 770 mm Max. plate spacing: 1595 mm Ejector force: 96 kN Ejector travel: 230 mm Injection Unit 2300 Screw diameter: 70 mm Spray volume: 1212 ccm Injection weight in hp: 1,100 g Spec. Spray pressure: 1877 bar L/D Screw Ratio: 20 Hydr. Drive power: 51 kW Cylinder heating capacity: 27 kW Facilities Hydraulic core pull: 4 (+ 2 additional connections on the hard drive) Hydraulic cascades: 4 Hot runner control points (zones): 40 Servo-hydraulic pump drive activeDrive (energy-saving) In ...

Key data: 800 kN, 40 mm

Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Make: 2021 Hours: 5646 h Clamping force: 800 kN Holm dimension h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Plate spacing max.: 750 mm Opening travel: 500 mm Screw diameter: 40 mm Displacement: 201 cc Spray pressure: 1860 bar Equipment 3 freely programmable inputs and outputs Screen text German Screentext Polish CEE socket 16A CEE socket 32A Increased ejector force Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water battery Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Interface BDE Interface for coloring device Interface USB Schuko socket 10A Machine dimensions LxWxH: 4.3m x 1.6m x 2m Total Weight: 3900KG

Key data: 800 kN, 30 mm

Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control: CC100 Year of Make: 2005 Hours: 76988 h Clamping force: 800 kN Plate size h x v: 670 x 600 mm Min. installation height: 250 mm Plate spacing max.: 700 mm Opening travel: 450 mm Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Machine including conveyor belt Machine including handling Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Machine dimensions LxWxH: 4.05m x 1.93m x 2.2m Total Weight: 5200KG Technical Data Handling Machine type : Linear handling Make: Engel Control: ER-HLI 31 VC Year of Make: 2005 Handling weight: 2 kg On-screen text: German Total weight: 250 kg

Key data: 800 kN, 25 mm

Stock No.: 503576 Manufacturer: ARBURG Type: Allrounder 900 T 800-150 Control: Year of Make: 2010 Hours: 72154 h Clamping force: 800 kN Tie-bar dimension h x v: 900 x 900 mm Min. installation height: 250 mm Plate spacing max.: 550 mm Opening travel: 300 mm Screw diameter: 25 mm Displacement: 54 cc Spray pressure: 2500 bar Equipment Screen text German Air valve 1x Machine with rotary table Machine with water battery Levelling elements Interface BDE Machine dimensions LxWxH: 3.8m x 1.85m x 2.15m Total Weight: 5000KG

Key data: 800 kN, 35 mm

Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control: MC5 Year of Make: 2008 Hours: 49673 h Clamping force: 800 kN Tie bar h x v: 520 x 420 mm Plate size h x v: 640 x 740 mm Min. installation height: 300 mm Max. plate spacing: 790 mm Screw diameter: 35 mm Displacement: 156 cc Spray pressure: 2429 bar Equipment Screen text German CEE socket 16A Air valve 1x Machine with material hopper Machine with water battery Levelling elements EUROMAP 67 Handling Interface Interface USB Schuko socket 10A Tool heater 24x Machine dimensions LxWxH: 5.35m x 1.7m x 2m Total Weight: 6500KG

Key data: 800 kN, 35 mm

Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Make: 2019 Operating hours: 9000 h Clamping force: 800 kN Holm dimension h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Plate spacing max.: 750 mm Opening travel: 500 mm Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 2429 bar Equipment 3 freely programmable inputs and outputs Screen text German Screentext Polish CEE socket 16A CEE socket 32A Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water battery Levelling elements Interface BDE Interface for coloring device Schuko socket 10A Low-wear plasticizing unit Machine dimensions LxWxH: 4.4m x 1.7m x 2m Total Weight: 3900KG

Key data: 900 kN, 42 mm

Stock No.: 503452 Manufacturer: BOY Type: 90 E Control: Procan ALPHA Year of Make: 2012 Hours: 49130 h Clamping force: 900 kN Tie bar h x v: 430 x 360 mm Panel size h x v: 635 x 610 mm Min. installation height: 250 mm Plate spacing max.: 725 mm Opening travel: 475 mm Screw diameter: 42 mm Capacity: 214.7 cc Spray pressure: 1724 bar Machine dimensions LxWxH: 4.37m x 1.21m x 2.2m Total Weight: 3730KG

Key data: 900 kN, 30 mm

Stock No.: 503672 Manufacturer: Battenfeld Type: HM 90-210 Control: UNILOG B6 Year of Make: 2013 Hours: 30533 h Clamping force: 900 kN Tie bar h x v: 420 x 370 mm Panel size h x v: 580 x 630 mm Min. installation height: 450 mm Plate spacing max.: 925 mm Opening travel: 475 mm Screw diameter: 30 mm Displacement: 106 cc Spray pressure: 2042 bar Machine dimensions LxWxH: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text German CEE socket 16A CEE socket 32A Core pull hydraulic 2x Air valve 1x Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Worm drive with three-phase servo motor Ethernet interface Interface EUROMAP 13 EUROMAP 67 Handling Interface Interface for coloring device Interface for temperature control unit Schuko socket 10A Tool heater 8x

Key data: 900 kN, 30 mm

Stock No.: 503670 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control: UNILOG B6 Year of Make: 2010 Clamping force: 900 kN Tie bar h x v: 420 x 370 mm Panel size h x v: 630 x 613 mm Min. installation height: 450 mm Max. installation height: 925 mm Plate spacing max.: 925 mm Opening travel: 475 mm Screw diameter: 30 mm Displacement: 106 cc Spray pressure: 2042 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 2x Air valve 1x Machine with water battery Machine without material hopper Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Worm drive with three-phase servo motor Ethernet interface Interface EUROMAP 13 EUROMAP 67 Handling Interface Interface for coloring device Interface for temperature control unit Interface USB Schuko socket 10A Tool heater 6x Machine dimensions LxWxH: 4.35m x 1.5m  ...

Key data: 900 kN, 22 mm

Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of Make: 2009 Hours: 70171 h Clamping force: 900 kN Panel size h x v: 740 x 680 mm Min. installation height: 300 mm Plate spacing max.: 800 mm Opening travel: 500 mm Screw diameter: 22 mm Displacement: 38 cc Spray pressure: 2060 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Air valve 2x Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Tool heater 4x Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total weight: 6700KG

Key data: 1000 kN, 157 g/PS, 42 mm

1.0 pcs. Two-component injection moulding machine electric Manufacturer: DR. BOY Type: 100E Type: 552 Year of Make: 2017 Clamping force: 100 tons Spar spacing (hxv) 430 x 360 mm Installation height MIN. 250 mm Screws DN 1: 42 mm Moulded part weight 1: 157.6 g/hp Screws DN 2: 24 mm Moulded part weight 2: 39.1 g/hp Control: PROCAN ALPHA Equipment: 1 x Core Pull Highly wear-resistant plasticizing unit Control Pneumatic Needle Gate Nozzle Dryer, manufacturer: FARRAG, year of manufacture: 2016

Key data: 2000 kN, 359 g/PS, 50 mm

Arburg 570A-2000-800 /170 Two-component hybrid injection moulding machine with sorting flap (243) Number: 243 Availability: in stock Year of production: 2010 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Clamping force [kN]: 2000 Gap spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Minimum mould height [mm]: 250-550 Control Type: Selogica Tongue: English, German Working time [h]: 79008 Weight [kg]: 10.950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air Valve: x5 Core string: 1x

Key data: 500 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request.  ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

machine number type model year clampingforce distance between openingstroke screw shotvolume tiebars diameter ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 249 ...

Hydraulic injection moulding machine manufactured in 2008. This HAITIAN SA8000 features a clamping force of 8,000 kN and an injection volume of 5,768 cm³, making it suitable for various applications. The machine is equipped with a screw diameter of 120 mm and has undergone recent servicing, including a new nozzle filter installed in 2023. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN SA8000 machine we have for sale. Contact us for further details.

A package of six injection moulds for the series production of office organization products is available. The molds can be used to manufacture nestable filing trays, PET filing trays A4-C4, high-gloss and matte PS filing trays, a frame for a 3-tier filing tray unit, and a PET desk organizer. Materials processed: PET, recycled PET and PS. Mold numbers: W23630, W23635, W61014F2, W61015F5, W61019 and W62539. Mold dimensions depending on the mold: 397-570mm × 396-820mm × 369-637mm. Mold weights where documented: 450-1450kg. Average cycle times: 24.4-43.2s. Machine classes previously used where documented: 250t, 275t and 380t. According to the available documentation, the molds are in good condition. W61019 is used exclusively to manufacture the frame for the 3-tier filing tray unit. The molds are sold as a complete package. An on-site inspection of the molds is possible by arrangement.

Battenfeld HM 300/2250 Injection Molding Machine Clamping force: 300 t Year of Make: 2009 Injection unit: .../2250 Screw diameter: 65 mm Spec. Spray pressure: 2070 bar Injection volume: 1078 ccm Injection weight in hp: 981 g L/D Screw Ratio: 22 Clamping unit: 300/... Size of the clamping plates: 1030 x 1020 mm Lights spar spacing: 710 x 710 mm Tool installation height: 225 mm Max. plate spacing: 1125 mm Ejector force: 59 kN Ejector travel: 200 mm Weight: approx. 14600 kg Control: UNILOG B6S Equipment: wear and corrosion resistant plasticizing unit (PP/PPSU), high-temperature heating belt up to 450 C, 4 x hydraulic core pull (EUROMAP 13), parallel ejection via additional DFEE pump, 2 x pneumatic valve, robot interface EUROMAP 67

Manufacturer: LWB Construction year: 2024 Model: VCRS 500/115 bc Type of machine: Injection moulding machine Technical Details: - Clamping force: 500 kN - Injection volume: 115 cm3 - Machine weight: 3600 kg - Compressed air: 6 bar - Voltage: 400 V / 50 Hz - Electrical power: 46 kW - Operating hours: approximately 6,800 - Extras: Hot runner with two separate heating areas, additional safety walls, automation with plate moving in and out for easier access - Mould not included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Multiplas Year of manufacture: 2023 Model: V2C-50T Type of machine: Injection Molding Machine Technical Details - Screw diameter: 35 mm - Theoretical injection volume: 154 cm3 - Injection capacity (PVC): 145 gm - Injection pressure: 1383 kg/cm2 - Injection rate: 69 cm3/sec - Plasticizing capacity (PVC): 53 kg/hr - Screw rotation speed: 186 rpm - Heater capacity: 3.9 kw - Clamping force: 55 ton - Min. mold thickness: 350 mm - Opening stroke: 300 mm - Max. opening thickness: 650 mm - Ejector stroke: 90 mm - Ejector power: 1.8 ton - Electric power: 10/7.5 hp/kw - Oil tank capacity: 160 L - Cooling water capacity: 230 l/hr - Machine size (L.W.H.): 2.3 x 1.5 x 3.7 m - Machine weight: 3.4 ton - Operating hours: approximately 420 - Extras: Material hopper included - Mould not included, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Stork Year of manufacture: 2005 Model: S-2000-850 Type of machine: Injection Molding Machine Technical Details : - Tonnage: 200t machine - Running hours: 40,048 - Power supply Q1: 400 V, 50 Hz, 3 Ph, N - Current Q1: 282 A - Control voltage: 24 V DC - Max oil pressure: 210 Bar g - Max air pressure: 8 Bar g - Injection weight: 4,000 kg - Options: 1 extra hydraulic core - Options: 6 air valves - Options: 1 air valve for steering the mould ejector needles Find more here - .ucymachines/ Contact us at - sales@ucymachines

Injection moulding machine Arburg 1500 T 2 K BJ 1999

Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power.

Key data: 550 kN, 28 mm

NEGRI BOSSI V55-200 - 55T Year: 1998 Working Hours: 51,000 hrs Screw diameter: 28mm Injection capacity per cycle: 84g Opening stroke: 255mm Mold thickness (min x max): 120mm x 350mm Distance between tie bars (H x V): 315mm x 280mm Ejector stroke: 75mm 1 hydraulic core pull 2 air valves

Key data: 1600 kN, 45 mm

NEGRI BOSSI V160/610 - 160T Year: 2001 Working Hours: 72,500 hrs Screw diameter: 45mm Injection capacity per cycle: 360g Opening stroke: 460mm Mold thickness (min x max): 170mm x 550mm Distance between tie bars (H x V): 510mm x 450mm Ejector stroke: 200mm 1 hydraulic core pull 2 air valves

Wittmann Battenfeld EcoPower 180/350/130, built in 2018 All-electric 2-component injection moulding machine with vertical second unit and turntable. Clamping force: 180 t Injection unit: 350 / 130 (aggregate A horizontal, aggregate B vertical) Screw diameter: 35 / 25 mm Spec. Spray pressure: 2,083 / 2,218 bar Injection volume: 168 / 61.4 cc L/D Ratio: 22 Size of the clamping plates: 810 x 805 mm Lights spar spacing: 570 x 520 mm Tool installation height: 225 mm (increased installation height EBH +300) Ejector force: 40 kN Rotary table: Ø 750 mm Control: UNILOG B6P, Ready for QuickLook app Operating hours: 12,869 h, Number of shots automatic: 5,409,083 Protective enclosure Dimensions LxWxH: approx. 5.5 x 2.6 x 2.4 m Price on request.

Key data: 3200 kN, 70 mm

NEGRI BOSSI V320/2000 - 320T Year: 2000 Working Hours: 85,000 h Screw diameter: 70mm Injection capacity per cycle: 1035g Opening stroke: 630mm Mold thickness (min x max): 250mm x 700mm Distance between tie bars (H x V): 630mm x 570mm Ejector stroke: 225mm 1 hydraulic core pull 1 air valve

Wittmann Battenfeld HM 180/350H/350V ServoPower, year 2015 2-component injection moulding machine with vertical secondary unit and rotary table, ServoPower drive. Clamping force: 180 t Injection unit: 350 / 350 (aggregate A horizontal, aggregate B vertical) Screw diameter: 30 / 35 mm Spec. Spray pressure: 2,835 / 2,083 bar Spray volume: 123 / 168 cc L/D Ratio: 22 Lights spar spacing: 570 x 520 mm Tool installation height: 325 mm Ejector force: 41.2 kN Ejector travel: 200 mm Rotary table Control: UNILOG B6S Operating hours: 16,967 h, Number of shots automatic: 6,043,139 Oil filling: 400 l, cooling water: 320 l/h, sound level: 72 dB(A) Weight: approx. 11,200 kg Dimensions LxWxH: approx. 5.0 x 1.75 x 2.14 m Price on request.

ARBURG Allrounder 220 S 150-30, built in 2001 Equipment / Condition: - Selogica control system with CF card reader - Clamping force 150 kN, injection unit 30, screw 18 mm (screw/barrel tested) - Operating hours according to control: approx. 48,000 h (pump) / approx. 43,000 h (automatic) - Very compact machine, footprint approx. 2.1 x 0.8 m - ideal for small parts - From a mold making pilot plant (sampling and 0 series), little used in recent years - Without peripherals (dryer and hopper available on request) - Inspection in operation possible - Location Southern Germany, price on request

Key data: 150 kN, 146 g/PS, 35 mm

1.0 PCS Injection Molding Machine with Robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture; 2008 Clamping force: 150 tons Handlebar spacing: 520 x 520 mm Screw diameter: 35 mm Displacement: 166 cm³ Moulded part weight: 146 g/hp Equipment; Removal robot, manufacturer; Wittmann, Type: W721, Year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x Core Pull Security fence

Key data: 3000 kN, 712 g/PS, 60 mm

Stock No.: 503393 Manufacturer: KRAUSS MAFFEI Type: KM 300-1400 CX Control: MC5 Year of Make: 2011 Hours: 78454 h Clamping force: 3000 kN Tie bar measurement h x v: 630 x 630 mm Panel size h x v: 995 x 1050 mm Min. installation height: 330 mm Plate spacing max.: 1150 mm Opening travel: 820 mm Screw diameter: 60 mm Displacement: 678 cc Spray pressure: 2007 bar Equipment: Machine WITHOUT handling! Screen text German CEE socket 16A Pressure accumulator for parallel function ejector and core pull Core pull hydraulic 2x Machine without material hopper Levelling elements EUROMAP 67 Handling Interface Interface for handling Schuko socket 10A Machine dimensions LxWxH: 6.5m x 2.2m x 2.3m Total Weight: 15000KG