injection used for sale

Electric injection molding machine model LGE250II (max. clamping force 250t) manufactured by LS Mitron Ltd. Korea. Inter-column distance 640x640mm. Screw diameter 50 mm. Maximum injection on PS 293 gr. Electrical power 10.2 kW. Dimensions (LxWxH) 5.5x1.5x2.1 m. Weight 8.5 tons.

Horizontal 4 column design full hydraulic clamping system Rubber Injection moulding machine A machine that used very little.very clean .There is no problem in the machine.The machine has a brush Clamping force : 1979 KN Injection volume : 1500-3500 mm Heating plate dimension : 710 x 800

Price includes Wittman Robot Injection unit : 15 Mould Clamping Force ( KN ) : 25000 Space Between Tie Bars (h x v) (mm) : 2020 X 1620 Screw Diameter (mm) : 180 Injection Pressure (Bar) : 114 Maximum Shot Wieght,PS(g) : 21070 Heating Capacity(Kw) : 81,4 Pump Motor(Kw) : 224 Total Power(Kw) : 305,4 Clamping Unit : Max.mould thickness (mm) : 1700 Min.mould thickness (mm) : 800 Ejektor stroke(mm) : 300 Max.Daylight (mm) : 3500 Oil Tamk Capacity(lt) : 3000 Screw Stroke (mm) : 870 Max.Shot Molten plastic weight(gr) : 15.170 Max. Shot weight . 17,44 per 1mm (gr) Actual Value (gr) : 18,5

The injection molding machine is in good working order, sold due to the completion of the project. If necessary, it can be seen in operation. Clamping force: 340 t Injection capacity: 113 cm³ Screw diameter: 30 mm Equipment: Turntable

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total production time h 54540/61077/51379 Origin Germany Closing Unit Closing Force 2000 Kn (200T) Inner width between columns (hxv) 560x560 mm Mold opening way 700 mm Min. Mold height 350 mm Pusher distance 200 mm Pusher forward force 58 Kn Injection Unit SP1000 Screw diameter 55 mm L / D ratio 20 Volume 523 Cm3 Weight (PS) 476 g Pump power 37 kw Heater power 18 kw Weight ca. 10 t Length x Width x Height 5320x1750x2230 mm price for one machine

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 mm Max distance between boards: 750 mm Snail: 35 mm Injection volume: 139 cc / 127 grams PS Injection pressure: 2500 bar Motor: 22 kW Heaters: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4300 kg

screw diameter 55mm, max stroke volume 475 cm3, injection pressure 1179 bar, increased injection pressure 1579 bar, clamping plates 860x830mm, max mold height 700mm, max plate spacing 950mm, 146156 Mh, included in the sale and price is the manipulator ERC43/1-EA

Engel 330/90HL injection press Year 1996 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 330/80 injection press Year 1990 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6

Key data: 800 kN, 45 mm

warehouse no.: 503399 manufacturer: ARBURG type: Allrounder 370 S 800-350 controller: SELOGICA year of construction: 2004 operation hours: 33700 h clamping force: 800 kN distance between tie-bars h x v: 370 x 370 mm size of mould plates h x v: 570 x 570 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 45 mm swept volume: 230 ccm injection pressure: 1670 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A vario injection unit mould heating 2x measures of machine l x w x h: 4m x 1.4m x 2.1m total weight: 3800KG

Condition: Used Operating hours: ca. 5.300 Clamping force (t): 25 Mould installation height min (mm): 150 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 24,5 Total weigh (kg): 1580

Condition: Used Operating hours: ca. 19.000 Clamping force (t): 25 Mould installation height min (mm): 122 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 25 Total weigh (kg): 1920

Haitian MA13000 injection moulding machine Injection size : 8230 cm3 Screw model : C-D130 Power : 214,55 Kw Distance between column : 130 cm x 130 cm , height : 135 cm Equipment in picture like loader,robot,tower are not included Power : 214,55 Kw

Key data: 1500 kN

warehouse no.: 503061 manufacturer: DEMAG type: Ergotech system 150-610 controller: NC4 year of construction: 2004 operation hours: 63329 h clamping force: 1500 kN distance between tie-bars h x v: 500 x 500 mm size of mould plates h x v: 750 x 750 mm min. mould height: 250 mm max. mould height: 560 mm max. open daylight: 1060 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 323 ccm injection pressure: 1973 bar equipment included: Ejector parallel to the mould movement screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 1x air valve 1x machine with material hopper machine without belt conveyor machine without hopper loader Anti vibration mounts Schuko-socket 10A choice unit measures of machine l x w x h: 5.45m x 1.63m x 2.1m total weight: 7500KG

I am selling a Nissey injection molding machine made in Japan in 1989. Closing force 1610 kN Distance between columns 460x460 mm Auger diameter 50 mm Injection volume 353 cm³ Material pressure 1715 bar Installed power 32.3 kW Condition - faulty, reason - they did not find a specialist to configure the hydraulic pump control unit after replacing it with a new one. Price is negotiable

Key data: 1800 kN, 460 g/PS, 55 mm

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

Engel Victory 330/90 injection molding machine for sale. Year of production: 2009. Clamping force: 90 tons. Screw diameter 40 mm. Hours worked: approximately 60 thousand. The machine is in very good technical and visual condition. Working machine, possibility of testing on the buyers injection mold.

Key data: 1000 kN

Inv. Num. : 7219 Type: 100-380 AX Producer: Krauss Maffei Created: 2010 Parameters: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cc Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 410 mm Opening the mold: 350 mm Operating pressure: 1860 bar Machine length: 4950 mm Machine width: 1700 mm Machine height: 2000 mm Injection weight: 5150 kg

Key data: 300 kN, 50 g/PS, 28 mm

Used injection moulding machine Dr. Boy 30 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 28 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 280 mm (height) x 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH and PIOVAN vacuum cleaner possible for an extra charge incl. installation More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Photos are sample images

Key data: 220 mm, 44 , 28

Used injection moulding machine Dr. Boy 22 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Example photo of identical machine

Key data: 220 mm, 18 , 18

Used, refurbished injection moulding machine Dr. Boy 22 M Procan Parts warranty available. Plasticizing unit 18 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine

Key data: 250 mm, 37 , 24

Used, refurbished injection moulding machine Dr. Boy 25 M Procan Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 254 mm (width) x 254 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine

Key data: 500 mm, 121 , 38

Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 38 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 335 mm (width) x 305 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change

Key data: 800 mm, 179 , 42

Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 42 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 410 mm (width) x 358 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change

High-speed, high-precision thermoplastic automatic machine of a hybrid” type (electricity + hydraulics) with a feedback system. Installed in 2012, never used (new) PECULIARITIES: • The injection unit uses an AC servomotor to accurately dose the material. • Maximum injection speed – 700 mm/sec. • The machine of this series is ideal for high-precision casting of products for the electrical industry, as well as for high-speed casting of thin-walled products for the packaging sector.

Key data: 1800 kN, 460 g/PS, 55 mm

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h in fully automatic mode Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

Type of control: SELOGICA Number of hours: 38,000 hours Closing force: 200T Opening stroke: 650mm Between columns: 570 x 570 mm Tray dimensions: 795 x 795mm Mini/maxi mold: 250 mm Max distance between trays: 1400 mm Injection: Screw diameter: 50 mm Screw length: 20D cm3: 392 Bars: 2000 General: Motor power: 19.9 kW Heating power: 8kw Closing weight: 9T Injection weight: Length dimensions: 5.50 m Width dimensions: 2 m Dimensions height: 2.40 m Options: Cores: 1 Robot interface: yes Bi metal: yes

Injection molding machine ARBURG ALLROUNDER MULTRONICA 100T Parts ARBURG ALLROUNDER MULTRONICA (1996) Model 420 M 1000 - 250 MOOG double pump unit with lantern and cradle (2015) MULTRONICA control cabinet Complete injection unit + heating + pontoon chassis Complete engine assembly with lantern

Screw diameter: 40 mm Calculated injection volume: 220 cm³ Length/diameter ratio: 23.5 L/D Maximum injection rate: 251 cm³/s Pressure on the material: 2030 bars Plastification capacity PS: Kg/h Screw Speed: 175 RPM Hydraulic motor torque: Nm Hydraulic motor power: HP Nb Temperature zones: N CLOSING UNIT Closing force: 1000 kN Opening stroke: 175 mm Min/Max Mold Thickness: mm Max distance between tray: mm Passage between columns: 445 x 445 mm Dimensions of the trays: 630 x 630 mm GENERAL Heating power: kW Total installed power: kW Quantity of oil: l. Dimension: (WxHxD) 5.3 x 1.8 x 1.35 m. Weight: 5230 Kg

INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 42 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1830 bars CLOSING UNIT Closing force: 250 kN Opening stroke: 315 mm Mold thickness Mini / Max: 160 mm Max distance between tray: 475 mm Passage between columns: 280 x 280 mm Tray size: 410 x 410 mm GENERAL Quantity of oil: 120 l. Dimension: (WxHxD) 2.90 x 1.65 x 1.03 m. Weight: 1550 Kg

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2020 bars CLOSING UNIT Closing force: 1000 kN Passage between columns: 460 x 460 mm Tray size: 580 x 470 mm GENERAL Heat output: 22 kW Total installed power: 31 kW Quantity of oil: 250 l.

Number of hours: 45,000 hours Closing force: 40 T Opening stroke: 200 mm Between columns: 270 x 270 mm Tray dimensions: 380 x 380 mm Mini/maxi mold: 150/350 mm Max distance between trays: 550 mm Injection: Screw diameter: 18 mm Screw length: 24.5/D cm3: 23 Bars: 2500 General: Motor power: 11 kW Heating power: 4.1 kW Closing weight: 1.5 Tons Injection weight: Dimensions length: 3 m Width dimensions: 1m Dimensions height: 1.6 m Options: Cores: Robot interface: YES Bi metal: YES

Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressure on the material: 1700 bars Plasticizing capacity PS: 50 Kg/h Screw Speed: 320 RPM Number of temperature zones: 4 N Closing force: 2100 kN Opening stroke: 540 mm Mini /Max Mold Thickness: 200-630 mm Passage between columns: 570 x 510 mm Dimensions of the trays: 870 x 790 mm Heating power: 22 kW Total installed power: 43 kW Dimension: (WxHxD) 6.2 x 2.2 x 1.54 m. Weight: 8250 Kg

Year: 2008 Type of control: DIXIT II Number of hours: 21800 Place of storage: FRANCE Timeframe: AVAILABLE Closing Closing force: 320 T Opening stroke: 660 mm Between columns: 735 x 735 mm Tray dimensions: 1045 x 1045 mm Mini / maxi mold: 330 x 680 mm Max gap between trays: 1340 mm Injection: Diameter of the screw: 75 mm Length of the screw: 21.50 D cm3: 1259 Bars: 1600 Generalities Engine power: 75 kw Heating power: 27 kw Closing weight: 17 tons Injection weight: Dimensions length: 7.60 m Dimensions width: 2.10 m Dimensions height: 2.60 m Options: Cores: 2 Robot interface: yes Bi metal: yes Accus: yes Blowers: Others:

Control type: NC 4 Number of hours: 45,000 hours Closing force: 420 T Opening stroke: 710 mm Between columns: 810 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mold: 380/820 mm Max distance between trays: 1530 mm Injection: Screw diameter: 60 mm Screw length: 20D cm3: 763 Bars: 1905 General: Motor power: 45 kW Heating power: 23.1 kW Closing weight: 18t Injection weight: Length dimensions: 8 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: YES Bi metal: YES

Control type: NC 4 Number of hours: 38,000 hours Closing force: 420 T Opening stroke: 710 mm Between columns: 800 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mold: 380/820 mm Max distance between trays: 1530 mm Injection: Screw diameter: 60 mm Screw length: 20D cm3: 763 Bars: 1905 General: Motor power: 45 kW Heating power: 23.1 kW Closing weight: 18t Injection weight: Length dimensions: 8 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: YES Bi metal: YES

Control type: CC200 Number of hours: 8,000 hours Closing Closing force: 110 T Opening stroke: 350 mm Between columns: rotating table: 1,200 mm Plate dimensions: rotating plate: 1,200 mm Mini/maxi mold: 250 mm Max distance between trays: 600 mm Injection: Screw diameter: 18 mm Screw length: 18.7D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Closing weight: 10T Injection weight: Length dimensions: 2.62M Width dimensions: 1.68M Height dimensions: 4M Options: Bi metal: yes

Control type: CC 200 Number of hours: 28,100 hours Closing force: 400T Opening stroke: 1000 mm Between columns: 1300 x 1100 mm Tray dimensions: 1300 x 1100 mm Mini/maxi mold: 450 mm Max distance between trays: 1450mm Injection: Screw diameter: 55 mm Screw length: 20D cm3: 510 Bars: 2050 General: Motor power: 55kw Heating power: 12.9kw Closing weight: 29T Injection weight: Length dimensions: 8.60 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: yes Bi metal: yes Others: Magnetic plate, 6 hydraulic sequentials? Robot KUKA KR 60L30-40KS 2012

Type of control: NC4 Closing force: 50 T Opening stroke: 260 mm Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini/maxi mould: 150/350 mm Max gap between trays: 610 mm Injection: Screw diameter: 30 mm Screw length: 20D cm3: 74 Bars: 1400 General: Motor power: 20 kW Heating power: 5 kw Closing weight: Injection weight: 3.3 tons Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 169 cm³ Pressure on the material: 2083 bars CLOSING UNIT Closing force: 1000 kN Mini /Max Mold Thickness: 250-600 mm Passage between columns: 470 x 420 mm EQUIPMENT PROCESS B 6 EUROMAP 67 1 Core Central ejection

Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars CLOSING UNIT Closing force: 2500 kN Mold thickness Mini / Max: 370-710 mm Passage between columns: 630 x 630 mm EQUIPMENT 4 Cores EUROMAP robot socket

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2120 bars CLOSING UNIT Closing force: 1300 kN Mold thickness Mini / Max: 225/275 mm Max distance between tray: 800 mm Passage between columns: 470 x 470 mm Tray size: 650 x 650 mm GENERAL Heat output: 22 kW Total installed power: 33.9 kW

BMB 1000 T injection press Reference: 7500/100 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars Injectable volume: 4650 cm3 Injectable weight (PS): 4400 g Injection speed: 2350 cm3 / sec Dimensions of the trays: 1660 x 1560 mm Distance between columns: 1110 x 1010 mm Machine weight: 62,000 kg