We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,319 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This HAITIAN MA 3500 III Plus Injection moulding machine was manufactured in the year 2021 and offers a high clamping force of 3500 kN and precise control for efficient and reliable injection molding processes. With a screw diameter of 65 mm and a shot weight of up to 1700 grams, it is suitable for a wide range of applications in plastics processing. The machine has advanced features for a fast injection speed of up to 530 mm/s and a closing speed of 300 mm/s, resulting in increased productivity and efficiency. The maximum opening distance of 2450 mm enables the processing of larger workpieces. It is equipped with a 65mm screw and can operate with a opening and has 333 production hours. It comes with a Hilectro V1300ID-CE Robot with 12kg payload capacity. This handling has a EUROMAP 67 interface.
used
This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding machine, it offers reliable performance and precision in moulding operations, making it a valuable asset for production lines requiring high-quality plastic components. The opportunity to buy this DEMAG Ergotech System 1500-440/120 injection moulding machine represents a strategic investment for businesses looking to upgrade or expand their manufacturing capabilities. For more details, please contact us.
used
Injection unit Screw diameter: 35 mm Calculated injection volume: 154 cm3 Length/diameter ratio: 20 L/D Max. injection rate: cm3/s Material pressure: 2790 bar Closing unit Closing force : 1300 kN Distance between tie-bars: 520 x 520 mm Platen dimensions: 725 x 725 mm General Total installed power: 9.4 kW Other Equipment : Process INTELECT 2 FULL ELECTRIC 2 Hydraulic cores 1 AIR core EUROMAP 67 Commissioning: 2019 Hours: 3300 h Tonnage: 130
used
Key data: 1500 kN
Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...
used
Key data: 4200 kN
Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement ...
used
Key data: 1100 kN
Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...
used
Key data: 800 kN
Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to ...
used
Key data: 500 kN
Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...
used
Key data: 500 kN
Sumitomo Demag IntElekt 50/370-80 / Electric Machine Year of construction: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Size of clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Air Valve x 4 Control with hot runners Injection unit hardened - Bimetal Central lubrication It is possible to change the screw diameter Metrics: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...
used
Key data: 1000 kN
Battenfeld TM 100/525 Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Metrics: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate ...
used
Key data: 350 kN
Battenfeld Plus 350/75 Year of construction: 2007 Injection unit: Screw diameter: 25 mm Injection weight: 44.6 g Injection pressure: 1575 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B2 Additional equipment: Air valve x 1 Metrics: Weight: 1000 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 1100 kN
Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...
used
Key data: 800 kN
Engel e-victory 170/80 Ecodrive / production line with the robot Engel Viper 20 / hybrid machine Year of construction: 2017 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 22,581 h Euromap 67 Robot Interface Air Valves Hydraulic core pull x 2 Control with hot runners Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Parallel Movements ...
used
Key data: 62 kN
Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of construction: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touchscreen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air Valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor, which is controlled by an inverter – very precise Automatic part feeding with quality control system Machine workstation protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...
used
Key data: 1600 kN
Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S robot / hybrid machine / operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 45 mm Spray weight: 289 g Injection pressure: 2336 bar Dosing volume: 318 ccm Clamping unit : Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touchscreen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nit ...
used
Key data: 800 kN
Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Spray weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing unit, volumetric with container - Conveyor with proportional valve Metrics: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heat ...
used
Key data: 350 kN
Arburg 221M 350-75 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Injection pressure: 1570 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 1300 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 7.5 kW Heating capacity: 4 kW Total power: 11.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 300 kN
Arburg 270C 300-100 with the Wittmann W621 robot Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 2240 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 30 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 2 Control with hot runners Injection unit hardened - Bimetal Robot Wittmann W621 Year of construction: 2004 5-axis robots: 3 axes are driven by servo motors (electric); Axis B (rotation) and C Travels in axes: X-550, Y-1000, Z-1500 Touch control panel Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 2250 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 7.5 kW Hea ...
used
Key data: 800 kN
Arburg 370S 800-350 Year of construction: 2000 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 370x370 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap Robot Interface Hydraulic core pull x 2 Injection unit hardened - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Metrics: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company i ...
used
Key data: 1000 kN
Arburg 470H 1000-800 e² with the Wittmann W821 robot / Hybrid machine / Operating hours: 16,458 h in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 55 mm Spray weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 16,458 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by the servo motor, which is controlled by an ...
used
Key data: 1500 kN
Arburg 470C 1500-675 Year of construction: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Spray pressure: 1440 bar Dosing volume: 508 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Core Pull Control Injection unit hardened - Bimetal Parallel Movements Metrics: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Injection unit: Type F75E Screw ø 36 mm Injection volume (max.) 147 cm³ Spraying speed (max.) 153 cm³/s Injection pressure (max.) 1,920 bar Holding pressure (max.) 1,720 bar Clamping unit: Clamping force (max.) 980 kN Travel 360 mm Tool size (min./max.) 150/510 mm Clear width tie rods 460 x 460 mm Die plate size 630 x 630 mm Equipment/Accessories: Automation Robot Interface EUROMAP 67 Other Interfaces Paint Dosing Unit, Cooling Unit
used
Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004
used
Battenfeld TM Xpress 270/1350 injection molding machine is on sale 2011 Battenfeld TM Xpress 270/1350 Injection molding machine
used
NegriBossi injection molding machine for sale 2008 NegriBossi v320 Injection molding machine
used
ENGEL injection molding machine unit for sale. The unit is used for gas injection. The year of production of the device is 2006. We bought it with the machine but we never used it. It has been in stock since purchase. The device is practically new, unused. We have full documentation.
used
injection molding machine KRAUSS MAFFEI EX 160/180 injection molding machine Number of hours worked: 20,068 2012
used
Sandretto injection press series 7 135 tons sandretto series 7 135 ton Injection molding machine
used
INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Pressure on the material: 2380 bars CLOSING UNIT Closing force: 2500 kN Mold thickness Mini / Max: 300 mm Passage between columns: 630 x 630 mm EQUIPMENT EUROMAP robot socket 2 Cores
used
INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Pressure on the material: 2426 bars LOSING UNIT Closing force: 3300 kN Opening stroke: 675 mm Mold thickness Mini / Max: 330/710 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm
used
INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Pressure on the material: 2040 bars CLOSING UNIT Mini /Max Mold Thickness: 300-650 mm Passage between columns: 570 x 570 mm
used
INJECTION UNIT Screw diameter: 80 mm Calculated injection volume: 1608 cm³ Pressure on the material: 2304 bars CLOSURE UNIT Closing force: 5000 kN Opening travel: 0-860 mm Mini/Max Mold Thickness: 750-1250 mm Passage between columns: 920 x 920 mm
used
INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm
used
Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar
used
INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 258 cm³ Length / diameter ratio: 18 L / D Pressure on the material: 1469 bars CLOSING UNIT Closing force: 1300 kN Passage between columns: 405 x 405 mm Tray size: 610 x 610 mm
used
INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ CLOSING UNIT Closing force: 1100 kN Passage between columns: 470 x 470 mm
used
Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 mm min./ max. mold height [mm] min 350 max 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735
used
Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 min./ max. mold height [mm] 350 - 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735
used
Clamping force [kN] 1800 Clearance between columns (hxv) [mm] 580 x 520 Min./max. mold height [mm] 225-550 Injection unit Screw diameter [mm] 45 Shot weight [g] 325,6 Injection pressure [bar] 2100
used
Demag concept 420/810-2300 year 06 We offer a Demag injection molding machine in working condition. Used only in morning shifts and in semi-automatic mode. Must be seen in operation at our injection plant
used
Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.
used
PET PREOFRM injection mould Hotrunner : PET injection mould Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set and cooling mould
used
This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 bar.
used
This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.
used
This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.
used
This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.
used
Injection unit Screw diameter: 35 mm Calculated injection volume: 168 cm3 Material pressure: 2000 bar Closing unit Closing force : 1000 kN Min. mold thickness: 320 mm Other Commissioning: 2006 Tonnage: 100
used
Bausch Stroebel KS 1010 machine for injection vials Bausch Stroebel brand for injection vials from approx. 3. f00 vials/h, fully automatic, consisting of: Brand: Bausch Stroebel Model: KS 1010 Stainless steel crimper version for 16-45 mm vials, height 25-80 mm, speed according to product max. 3,500 vials/h. Includes 1 metal lid vibrator, staple station. The team is provided with its anti-cancer protections, monitoring the presence of the lid and its alarms.
used
This injection moulding machine, manufactured in 1999, has a robust design, weighing 53 tons, with a closing force of 11000 Kn. It includes hydraulic closing, M24 clamping threads, an ENGEL robot for automation, and a swivel mechanism for enhanced versatility, making it ideal for efficient, large-scale production. Reach out to us for further details on this ENGEL 1100 T injection moulding machine.
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).