injection pet used for sale

Key data: 2200 kN

Arburg 570C 2200-1300 / Hybrid machine Year of manufacture: 07.2006 Injection unit: Screw diameter: 55 mm Injection weight: 469 g Spray pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All offered machines are started by our service technicians before they are sold ...

Key data: 2200 kN

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ...

Key data: 2500 kN

Arburg 630S 2500-1300 ECO / Production line with the Sepro Industrial Robot SDR 22S Year of Make: 2008 Injection unit: Screw diameter: 55 mm Injection weight: 521 g Spray pressure: 2380 bar Dosing volume: 570 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 15 Hardened injection unit - Bimetal Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) ECO – the machine has a system for adjusting the minimum tool height Robot - Sepro Industrial Robot SDR 22S Year of Make: 2016 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X- ...

Key data: 3200 kN

Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustm ...

Key data: 800 kN

Sumitomo Demag Systec 80/420-310 with the Wittmann W818 robot Year of Make: 2015 Injection unit: Screw diameter: 30 mm Injection weight: 103 g Spray pressure: 2755 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Parallel movements Built-in printer Robot Wittmann W818 Year of Make: 2013 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4000 kg Length/Width/Height: 4.10x ...

John Deere 650 – Lucas CAV Fuel Injection Pump Manufacturer vehicle: John Deere Model: 650 Component: Diesel Injection Pump Manufacturer Injection Pump: Lucas CAV Marking: Nameplate available Nameplate No.: E29972 Design: mechanical injection pump With mechanical regulator/actuation unit With lever mechanism and return spring With fuel connections With mounted fittings and attachments Scope of delivery: Sale as listed in the pictures. Auction-ID: A1-49587-8003

Clamping force: 2700kN, injection volume: 500cm³, injection pressure: 3500bar, EUROMAP size: 2700-1750, rated power: 22kW, weight: approx. 10.7t, nozzle contact force: 58kN, total current: 138A, upstream fuse: 160A, max. short-circuit current: 10kA, enclosure type (UL): 1, hydraulic motor operating hours: 730h, hydraulic pump (clamping force): 65h, operating system active: 3,360h, was regularly maintained, is in well-maintained condition, an on-site inspection is possible.

SANDRETTO serie 8 790/240 Clamping force : 240 T Distance between tie bar : 570 x 570 mm Platen dimensions : 860 x 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 546 cm3 Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 11 500 kg Dimensions : 7,68 x 2,35 x 1,78 m

Key data: 3300 , 776 , 65

SANDRETTO serie 8 1331/330 Clamping force : 330 T Distance between tie bar : 650 x 650 mm Platen dimensions : 980 x 980 mm Mould thickness min / max : 210 - 730 mm Ejection strocke : 240 mm Injectable volume : 863 cm3 Weight in PS : 776 gr Pressure on material : 1550 bars Screw diameter : 65 mm Weight : 15 800 kg Dimensions : 7,90 x 1,85 x 2,30 m 

Netstal 350 T type EVOS 3500/2900 Année : 2010 ?Modèle : EVOS 3500/2900 ?Tonnage : 350T? Nombre d’heure : 60 000 heures Diamètre vis d'injection : 70 mm Rapport ?L/D : 27 ?Pression injection : 2400 bars? Volume d'injection : 1078 cm3 ?Épaisseur moule (mini/maxi) : 700 - 1150 mm? Passage entre colonne : 730 x 730mm? Dimension des plateaux : 922 x 1086 mm? Poids : 25 000 Kg

Key data: 2200 , 496 , 55

SANDRETTO serie 8 790/220 Clamping force : 220 T Distance between tie bar : 510 x 510 mm Platen dimensions : 770 x 770 mm Mould thickness min / max : 210 - 630 mm Ejection strocke : 190 mm Injectable volume : 546 cm3 Weight in PS : 496 gr Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 9 000 kg Dimensions : 6,50 x 1,60 x 2,30 m 

Presse à injecter BILLION bi matière 750 T Type : H780/6860 - 750 Vis de 45 mm Vis de 90 mm Equipée du dosage électrique et start and stop

Key data: 1600 kN, 184 g/PS, 40 mm

Arburg 520A-1000-400 (246) Hybrid injection moulding machine with sorting flap and gas reinforcement Number: 246 Availability: in stock Year of production: 2007 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Clamping force [kN]: 1600 Gap spacing [mm]: 520 x 520 Plate size [mm]: 790 x 795 Control Type: Selogica Tongue: German Installed power [kW]: 21.2 Working time [h]: 88631 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Feed hopper: NO Robot connection: Yes Air Valve: 3x

Key data: 3500 kN, 1100 g/PS, 70 mm

Year of construction 2010 Clamping force: 350 tons. Screw diameter: 70 + 30 mm Shot volume: 1155 cm³ + 113 cm³ with removal robot Wittmann Good condition