135,512 used machines on RESALE, but how to find them? Machine Search
Key data: 2500 kN
Arburg 630S 2500-1300 ECO / Production line with the Sepro Industrial Robot SDR 22S Year of Make: 2008 Injection unit: Screw diameter: 55 mm Injection weight: 521 g Spray pressure: 2380 bar Dosing volume: 570 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 15 Hardened injection unit - Bimetal Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) ECO – the machine has a system for adjusting the minimum tool height Robot - Sepro Industrial Robot SDR 22S Year of Make: 2016 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-150 ...
Key data: 3200 kN
Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment ...
Key data: 2200 kN
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...
Screw diameter: 75 mm Injectable volume: 1657 cm3 Injection pressure: 2121 bar Column passage: 820 x 820 mm Moulded thickness: minimum: 300mm- max: 850 mm Opening stroke: 950 mm Number Of Cores :3 Robot interface: E12
Screw diameter: 70 mm Injectable volume: 1077 cm3 Injection pressure: 2423 bar Passage between columns: 720 x 720 Moulded thickness: minimum: 450mm- max: 750 Opening stroke: 700 mm Number Of Cores :2
Screw diameter: 90 mm Injectable volume: 2862 cm3 Injection Pressure: 1472 Column passage: 1100 x 1100 mm Moulded thickness: minimum: 450mm- max: 1200 Opening stroke: 1200 mm Number Of Cores :0 Robot interface: E12 28 heated zones
Screw diameter: 65 mm Injectable volume: 1138 cm3 Column passage: 710 x 630 mm Moulded thickness: minimum: 250 mm- maximum: 750mm Opening stroke: 750 mm Robot interface: E67 Blow Guns
Key data: 4000 kN
Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...
Screw diameter: 55 mm double thread Injectable volume: 582 cm3 Injection pressure: 2200 Column passage: 780 x 780 mm Moulded thickness: minimum: 760mm- maximum: 1190 mm Opening stroke: 760 mm Number Of Cores :2 Robot interface: E67 36 heated zones
Screw diameter: 50 mm Injectable volume: 422 cm3 Passage between columns: 560 x 510 Moulded thickness: minimum: 200mm- max: 600 mm Opening stroke: 600 mm
Screw diameter: 110 mm Injectable volume: 4847cm3 Injection pressure: 1892 bar Column passage: 1270 x 1100 mm Moulded thickness: minimum: 500mm- max: 1200 mm Number Of Cores :4 Robot interface: E67 Servo motor
NEGRI BOSSI CANBIO 210 T type V210-610 Année : 2008 Force de fermeture : 2100 KN - 210 T Diamètre vis : 40 mm Volume injectable: 285 cm3 Capacité d’injection en PS : 260 gr Pression d’injection : 2100 bars Rapport L/D : 22 Débit d'injection maxi : 129 cm3/s 3 zones de chauffe Course d’ouverture moule : 540 mm Epaisseur moule mini / max : 200 - 630 mm Passage entre colonnes : 570 x 510 mm Dimension des plateaux : 870 x 790 mm Puissance moteur de la pompe : 22 kW Puissance totale installée : 35 kW Dimensions : 6,03 x 1,54 x 2,20 m Poids : 8200 Kg
Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.
4 x Arburg injection moulding machines Injection moulding machine Arburg 470C 1500-400 BJ 2008 Injection moulding machine Arburg 270M built in 1995 Injection moulding machine Arburg 270S 500-150 BJ 2004 Sprise casting machine Arburg 320M 750-210 BJ 1998
An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible.
This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.
Key data: 1500 kN, 35 mm
Arburg 470 C Golden Edition – 150T Year of manufacture 2006 Screw diameter: 35 mm Pump hours: 33,756 h Automatic operating hours: 26,507 h Connection: 400V 50 Hz Installed power: 33 kW The press is operational and in good working order.
Presse à injecter ENGEL 800 T type DUO 5550/800? Nombre d’heures : 21 000 h ?Force de fermeture : 800 T - 8 000 KN? Diamètre vis : 90 mm? Volume injectable : 2 740 cm3? Pression d’injection : 1920 bars Rapport L/D : 20 Entre colonnes. : 1025 x 935 mm Dimensions des plateaux : 1570 x 1480 mm? Epaisseur moule mini : 650 mm ?Dimensions : 10 080 x 3 000 x 2 120 mm? Poids : 44 Tonnes
Key data: 2000 kN
Battenfeld VERTICAL V - 200T Clamping Force: 200T Machine Brand: Battenfeld Type: Single Material Unit: V 1000 Rotating System: Yes Number of Stations: 4 Distance Between Columns: 575 mm Table Diameter: 1520 mm Table Height: 700 mm Mold Thickness (Min/Max): 300 x 600 mm Opening Stroke: 300 mm Molding Screw Diameter: 50 mm Molding Injection Volume: 491 L/1000 km Number of Pneumatic Cores: 1 Number of Hydraulic Cores: 4 Rotating Tables: Yes Harting Injection Ports (Spins): 24 Harting Ejection Ports (Spins): 16 Molding Washer Diameter: 160 mm
B&A REF: 9170 TON: 50 SCREW DIAMETER: 14MM SHOT WEIGHT: 1 STROKE VOLUME: 1.1CM3 INJECTION PRESSURE: 2500AR PLATEN SIZES: 364 X 196MM MIN MOULD HEIGHT: 100MM MOULD OPENING STROKE: 200MM MAX DAYLIGHT: 300MM EJECTOR STROKE: 50MM CONTROLS: UNILOG B4
This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.
B&A REF: 9128 TON: 110 SCREW DIAMETER: 40MM SHOT WEIGHT: 183 STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 745 X 770MM DBTB: 470 X 470MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 900MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 HEATING CAPACITY: 10.97KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9262 TON: 210 SCREW DIAMETER: 60MM SHOT WEIGHT: 800 STROKE VOLUME: 880CM3 INJECTION PRESSURE: 1840AR PLATEN SIZES: 870 X 790MM DBTB: 710 X 510MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 540MM MAX DAYLIGHT: 1170MM EJECTOR STROKE: 225MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 25KW SCREW DRIVE: HYDRAULIC
Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.
It is in good cosmetic condition and in good working order.
Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible.
A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible.
A large-format injection molding machine Krauss Maffei is available. Clamping force: 6500kN, tie bar spacing X/Y: 1000mm/930mm, platen dimensions X/Y: 1530mm/1450mm, max. opening stroke: 900mm, mold height range: 350mm-650mm, max. platen spacing: 1550mm, ejector stroke: 250mm, ejector force: 110kN. Machine dimensions X/Y/Z: approx. 10000mm/2800mm/2450mm, weight: approx. 46000kg. Including a Wittmann handling unit. Documentation available. An on-site inspection is possible.
Key data: 1400 kN, 139 g/PS, 35 mm
1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt
clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power: ...
clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 430 x 660 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 800 kN - Mould mounting area: 430 x 660 mm - Clamping/opening stroke: 450 mm - Maximum mould installation height without heating plates: 300 mm - Maximum plate spacing without heating plates: 750 mm - Clamping direction: from below - Ejector stroke: 130 mm - Ejector force: 40 kN Injection unit: - Increased injection pressure: 2,180 bar - Maximum injection volume: 154 cm³ - Screw diameter: 35 mm - Screw length: 20D - Maximum screw speed: 20–400 rpm - Metering stroke: 160 mm - Injection: from above - Nozzle stroke: 250 mm - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: ...
clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power: ...
clamping force: -- kN injection volume: -- cm³ screw diameter: -- mm platen size: -- mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising 3x machines, model SAD 114/30 - Year of manufacture: 1999 - Problems with the control system 1x machine, model Super AD 76/15 - Year of manufacture: 2006 - Problems with the control system There are 3 machines built in 1999 and 1 machine built in 2006 available. The price is per unit. If you purchase several units a package price can be arranged. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1500 kN, 291 g/PS, 45 mm
Arburg 470C-1500-800 Injection moulding machine with conveyor belt and sprue picker (257) Year of production: 2005 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Clamping force [kN]: 1500 Gap spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Minimum mould height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 44,9 Working time [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot connection: Euro 12 Feed hopper: NO
Key data: 120 kN
Mohrtek injection press, vertical loadable, horizontal pressing machine. please contact for more information
This HAITIAN ZE2300 was manufactured in 2019. It features a clamping force of 2300 kN, a platen opening stroke of 1150 mm, and a screw diameter of 55 mm. Equipped with a robot and Euromap 67 interface, it remains in excellent condition and is still in production. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN ZE2300 machine we have for sale. Contact us for more information.
clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the ...
Screw diameter: 90 mm Injectable volume: 2740 cm3 Injection pressure, : 1920 bar Column passage: 1025 x 935 mm Shutter control 4 cores Robot interface 2 blow guns
2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023
2007 Arburg 270C 300-100 Manufacturer: Arburg Type: 270C 300-100 Machine running time / h: 59885 Construction year: 2007 Locking force (KN): 300 Screw diameter [mm]: 20 Injection weight [g]: 28 max. spec. Spray pressure [bar]: 2500 max. Dosiervolumen [cm³]: 31 Centering DS / AS [mm]: 110 / 110 Knee lever yes/no: NO max. opening distance [mm]: 550 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 1000 mm, 184 , 40
Screw diameter: 40 mm Displacement: 201 cm³ Injection weight in polystyrene: 184 g/hp Injection pressure: 2,000 bar Clamping force: 100 t 470 x 470 mm Tool installation height min.: 350 mm Opening distance: 350 mm CONTROL: Selogica Screen text: german / german Instruction manual: german / german Multilift H Core pulls: 2x Pump drive power: 22 kW Total connected load: 36.0 kW Total weight: 5,400 kg Machine dimensions L x W x H: 4.5 x 1.6 x 2.1 m m m Payment terms: 100 % before taking over the machine, net only
Key data: 1000 mm, 184 , 40
Screw diameter: 40 mm Displacement: 201 cm³ Injection weight in polystyrene: 184 g/hp Injection pressure: 2,000 bar Clamping force: 100 t 470 x 470 mm Tool installation height min.: 350 mm Opening distance: 350 mm CONTROL: Selogica Screen text: german / german Instruction manual: german / german Multilift H Core pulls: 2x Pump drive power: 22 kW Total connected load: 36.0 kW Total weight: 5,400 kg Machine dimensions L x W x H: 4.5 x 1.6 x 2.1 m m m Payment terms: 100 % before taking over the machine, net only
Key data: 250 mm, 21 , 18
Screw diameter: 18 or 25 mm Stroke volume: 23 / 44 cm³ Injection weight in polystyrene: 21 / 40 g/hp Injection pressure: 2,500 / 1,550 bar Clamping force: 25 t 270 x 270 mm Tool installation height min.: 200 mm Opening distance: 300 mm CONTROL: Selogica Screen text: german / english Instruction manual: german / german Euromap 67 Pump drive power: 7.5 kW Total weight: 2,500 kg Dimensions L x W x H: 3.0 x 1.3 x 1.9 m Payment terms: 100 % before taking over the machine, net only
Key data: 10000 kN, 135 mm
ENGEL 16050/1000 - 1000T Clamping force: 1000 T Platen dimensions (h × v): 1990 × 1740 mm Distance between tiebars (h × v): 1400 × 1150 mm Mold thickness (min - max): 400 - 1200 mm Screw diameter: 135 mm Injection capacity: 8875 cm³ Specific injection pressure: 1980 kg/cm² (≈ 1940 bar) Equipment: • Bi-material barrel (screw and cylinder) • 4 cores ENGEL 1000 Tonnes – 2 identical machines Year 2003: 47,200 h Year 2004: 50,500 h
Desma Vertical Injection Moulding Machines Model Type D968 250 ZO ( S3 ) Stroke Volume 2000 cm3 Injection Pressure 1670 bar Platen 560 mm x 630 mm Extended Daylight 860 mm Top and Bottom Hydraulic ejectors 400 mm stroke Strip Intake Control With Vacuum Pump Years: 2014 / 2015
Injection moulding machine Battenfeld BK T 2500 BJ 1991
Key data: 500 kN
Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg
Key data: 350 kN
Krauss Maffei 35-55 CX - 35T Year: 2005
Key data: 650 , 35
Presse à injecter BILLION PROXIMA 65 T Force de fermeture : 650 KN / 65 T Type : H310-65 Commande DIXIT 2 Année 2005 Diamètre vis : 35 mm Puissance installée : 35 KW
maximum number of results exceeded
please refine your search
