injection moulding used for sale

Hydraulic injection moulding machine manufactured in 2021. This Engel Victory 320/80 spex features a clamping force of 800 kN and an opening stroke of 450 mm. The machine has a maximum daylight of 750 mm and a mould height minimum of 300 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 320/80 spex machine we have for sale. Contact us for further details.

Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: ap ...

Serial Number: 154812 • Power: 400 V, 3 Phase, 50 Hz • Condition: Used • Additional Notes: Electrical data per nameplate: total current 107 A; main fuse 125 A; motor current 60 A; CE marked. Equipped with peripheral handling equipment visible (conveyors, temperature control unit, material hoses) Auction-ID: A7-40551-17

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.

Serial Number: 61008334 • Power: Unknown • Condition: Used • Additional Notes: Multinject configuration visible; machine equipped with additional vertical injection unit and safety enclosure; CE marked. Weight according to manufacturer plate. • Clamping force approx. 175 tons; screw diameter 160 mm class; designed for thermoplastic injection molding. Auction-ID: A7-40551-16

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

CONTROLS   CNC controls MOULD CLAMPING UNIT   locking force: 350 to   die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR)   stroke: 150 mm INJECTION UNIT   stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3700 mm   space requirements -front/back-: 1300 mm   total height: 2100 mm   total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB3 units available

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine.

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

Key data: 2500 kN, 700 g/PS, 60 mm

Year of construction 2002 Screw diameter 60mm Shot volume 735cm³ Clamping force 250t Min. mould installation height: 250 mm 2 Core pulls 1 air valve handling/robot ENGEL ECR 52/1-EA,RC100 6 integrated hot runner zones Operating hours only 14,109 h

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

Clamping force: 700kN, Opening stroke: 305mm, Ejector stroke: 105mm, Ejector force: 20kN, Screw diameter: 30mm, Shot volume: 99cm³, Speed: 480rpm, Injection pressure: 1451bar, Weight: approx. 6200kg, Control system: CC200, Operating hours: 57077h. Documentation available. An on-site inspection is possible.

A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026.

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-44836-1

An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible.

Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. An on-site inspection is possible.

Clamping force: 1800 KN Max injection cc 500g 380V/50Hz Auction-ID: A7-45261-4

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-699

Distance between the clamps 470x470 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 900 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Attention! Pick up by appointment Auction-ID: A1-43992-18

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-4544 ...

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-697

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-19

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-17

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-20

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3

KraussMaffei 50-190 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-190 C1 Year of manufacture: 1994 Serial number: 44236 Screw diameter: 30 mm Closing force: 500 kN Mould opening stroke: 350 mm Ejector stroke: 100 mm Injection pressure bar: 2222 Ejector force: 22 kN Electric connection: 400 V Approx. machine weight: 2300 kg Approx total dimensions (L x W x H): 3191 x 1500 x 1887 mm Tie bar spacing (H x V): approx. 321 x 321 mm Mould height range (min-max): ~200 mm - 550 mm Max. shot weight: ~66 g PS (polystyrene equivalent) Platen size: ~540 mm × 540 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-8

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

Clamping force: 200 Ton; piston closure; column passage: 520x520 mm; screw: 55mm; selogic control; Nr. 1 hydraulic jacks; Nr. 1 bellows; Euromap 12. Serial: 178453 Estimated weight: 6700 kg Approximate dimensions: 5500x2000xh2200 mm Auction-ID: A7-44996-25

Clamping force: 430 Ton; toggle closure; column passage: 760x680 mm; screw: 60mm; control B&R Columbia; Nr. 2 pneumatic jacks and 2 hydraulic jacks; Nr. 1 air blow; Euromap 12. Serial: 364-112 Estimated weight: 19500 kg Approximate dimensions: 8200x1950xh2600 mm Auction-ID: A7-44996-26

for the production of pillow candies Power 10 - 250 kg/h, depending on type and size of the candies

CAP.: 10 000 BTLS/H OF 1.5 L,

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Mouldingpresse The MP / 3E is a hydraulic press for the production of Clayprofilen such as rubber seals, protective, decorative or chrome strips. By inserting an appropriate form template in the bolt head, almost any profile can be produced up to a diameter of 65 mm. Manufacturer: Wadhwa Type: MP / 3 p Year of construction: 1995 Temperature controller Speed controller Via a rotary control a stepless adjustment of the speed is possible heated sealing head The built-in heater in the bolt head is adjustable Foot switch Weight: 125 kg Fully functional All information without guarantee Sold only to businesses

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away

KALMEIJER Pastry moulding rolls (standard A,B + C rolls)for KGM Christmas motifs used, good condition, different motifs: Spekulatius sorted German males Skat Nikolaus with fir tree (special roller)

Flat 4-sided blade (package, 10 pcs.) 12x12x1,5 Flat 2-sided blade (package, 10 pcs.) 20x12x1,5 Flat 2-sided blade (package, 10 pcs.) 30x12x1,5 Flat 2-sided blade (package, 8 pcs.) (used) 50x12x1,5

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm H ...

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 2 Number of rollers: 4 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 630 + 450 mm Height: 1200 mm Height of dough entry: 1180 m ...

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request

Used, well-preserved set of barrel / screw