injection moulding used for sale

Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.

Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.

Connected load: 42kW.

Connected load: 40kVA.

Hydraulic operating pressure: 275bar, weight: 4.1t.

Clamping plate dimensions: 830x770mm, distance between tie-bars: 560x500mm, ejector stroke: 200mm, screw diameter: 60mm, injection pressure: 1778bar, weight: 11.1t, with handling.

Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.

Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.

Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.

Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.

Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power.

Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.

Weight: 9.1t, the machine is leaking and the control card is missing.

Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.

Operational hours counter: 59,129h, with Handling PSA 2080.

Operational pressure: 210bar, weight: 4t, with documentation, without accessories.

Clamping force: 2000kN, drive power: 37kW, injection volume: 377cm³, melt pressure: 1600bar. Screw diameter: 50mm, control: MC4 32-bit microprocessor control, nozzle type: R 15. Dimensions X/Y/Z: approx. 5160mm/1900mm/2240mm, weight: approx. 10000kg. Without oil filling and material conveyor/material hopper. Available from August, 2024. Documentation available. On-site inspection is possible.

Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h.

Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.

Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.

Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.

Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.

Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.

Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.

Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side.

Operational hours counter: 62,699h, with documentation, without accessories.

Operational hours counter: 85,318h, with documentation, without accessories.

Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.

Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.

Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.

Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.

Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net

max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg.

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.

Arburg 420C-1000-250 (176) with challenge tape Item number: 176 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 89 g Clamping force: 1,000 kN Screw diameter: 30 mm Spray pressure: 2470 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 25 kW Operating hours: 70,643 h Weight: 3180 kg Dimensions: 4.5x1.7 m Funnel: No Core train: Yes

Inv. Num. : 6167 Type: GUIDANCE LWF 1300 -SV Producer: Leadway Created: 2016 Parameters: Clamping force: 130 t Screw diameter: 35 mm Distance between stands: 470x420 mm Ejector force: 45 kN Screw stroke length: 120 mm Mould height: 450 mm speed: 320 1/min Machine length: 4900 mm Machine width: 1400 mm Machine height: 1850 mm Spray weight: 5300 kg

screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net

Key data: 150

two-component machine year of manufacture 1995, closing force 150 T, control MC 3, plasticizing unit 1 - screw diameter 40mm, molded weight 183g, plasticizing unit 2-screw diameter 30mm, molding weight 85g

Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net

Injector Brand: Sandretto, Model: 1300/230. 230 TN. Year: 2002

Inv. Num. : 6315 Type: Allrounder 320 C 500 Producer: ARBURG Created: 2007 Parameters: Operating hours: 53.740 h Clamping force: 500 t Screw diameter: 30 mm Capacity oil container: 120 l Oil type: OPTIMA 32ZFP

Injection mould for round plastic bucket 5,5 L information: Weight of the mould: 505 kg Dimensions of the mould (mm): Φ=440, Φ1=500, H1=420 Centering ring (mm) (Φ): 160 Number of cavities: 1 Current condition: can not be seen while working Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Information about product: Volume (litres): 5.5 brim-full Volume (litres): 6 Dimensions – diameter top/bottom (mm): Ø 236 / Ø 205 Height (mm): 173 Weight (g): 200 ± 5 Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number of the handle of bucket (search: 161595367) Contact number: 0038651213228

Injection mould for round plastic bucket 5.5 litres Mould information: Weight: 449kg Dimensions of the mould (mm): Φ=420, Φ1=500, H1=415 Number of cavities: 1 Centering ring (mm): Φ 160 Availability: Immediate Current condition: out of production, can not be seen while working Bucket information: Volume: 5.5 L Brimfull Volume: 5.9 L Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 231 / Ø 235 / Ø 195 Height (mm): 190 Weight bucket (g): 220 ±5 Delivery time: To be agreed Guarantee: Without guarantee Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number to the lid of bucket (161549342) Number of the handle of bucket (161595367) Contact number: 0038651213228

Injection mould for round plastic bucket 6.5 litres information: Weight of the mould: 480kg Guarantee: Without guarantee Dimensions of the mould (mm) (Φ, Φ1, H1): Φ=420, Φ1=500, H1=480 Current condition: Not running, can not be seen while working Availability: Immediate Delivery time : to be agreed Centering ring (mm) (Φ): 125 Product: Round plastic bucket 6.5 litres Number of cavities: 1 Information about product: Bucket catalogue number: 1VM6501 Volume (litres): 6.5 Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 230 / Ø235 / Ø 195 height (mm): 225 weight (g): 247 ±5 Lid catalogue number: 1PV0506 Weight (g): 79±2 BUCKET INSERTS: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER LID INSERTS: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the lid of buck ...

Injection mould for lid of 5,5 L and 6,5 L plastic round bucket: Weight of the mould: 191 kg Dimensions of the mould (mm): Φ=400, H=270 Number of cavities: 1 Centering ring (mm) (Φ): 125 Lid weight (g): 85 ±2 Current condition: ready to work Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Lid inserts: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the bucket 5,5 L (search: 161523670) Number to the bucket 6,5 L (search: 161530621) Number of the handle of buckets (search: 161595367) Contact number: 0038651213228

Information about mould: Weight of the mould: 280kg Dimensions of the mould (mm): A = 445, B = 295, C = 225 Centering ring (mm) (Φ): 99 Number of cavities: 2 Current condition: operational, can be seen while working Availability: immediate Delivery time: to be agreed Guarantee: without guarantee Information about product: Dimensions (A, B, s) (mm): 254, 145, 9 Weight (g): 20g ± 1 g Contact number: 0038651213228

KRAUSS MAFFEI two shot (2k) KM1300-12000/8000 MX machines -Clamping force : 1300 ton