137,638 used machines on RESALE, but how to find them? Machine Search
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 30 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2000x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Only the cold circular saw with the 2m roller conveyor and the 2m stop including stand is up for auction. All other items to be seen in the picture are not part of the auction (control cabinet and others are not included!). Heavy, indestructible industrial cold circular saw of the quality brand Wahlen (Eschweiler), model S-WK II (steel version, built on the heavy WK III cast body). The machine is characterized by maximum freedom from vibration and torsional rigidity. The saw blade is guided from top to bottom by a solid hand lever (cross-cut principle). Thanks to the pole-switchable premium gear motor from EMOD and the integrated coolant device, it is perfect for locksmiths and metal construction for precise cutting of steel, stainless steel and profiles. Technical details & equipment: Manufacturer: Wahlen GmbH & Co. Model No.: S-WKII (Heavy Steel Cold Circular Saw Motor: EMOD pol ...
Reference ID: PP-62429 Manufacturer: Bobst Model: SP 142 CE Year: 1995 Max. Size: 1420 x 1020 mm Condition: Good Location: Europe Availability: Immediately Manufacturer: BOBST Model: SP 142-CER Year of manufacture: 1995 Maximum sheet size: 1,420 × 1,020 mm Minimum sheet size: 700 × 500 mm Maximum rated speed: 8,000 sheets/hour Maximum cutting force: 5.5 MN (550 t) Recorded operating hours: 51,652 h Condition: Good and fully operational Inspection: Available with the machine running, by appointment Equipment and configuration Automatic sheet-fed flatbed die-cutting system Die-cutting and creasing section Stripping section for removal of cutting waste Blanking section for separation of individual blanks Side-access tooling arrangement Pull-out tool/frame carrier Operator platforms with access stairs and guardrails Emergency-stop buttons at the machin ...
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 22 kW weight of the machine ca.: 16,65 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978
Pastec pasta machine used with pasta trays and corresponding tray trolley. The machine is equipped with 5 dies and cutters with 3 different blades. The base frame has extendable storage bars for the trays and is mobile. The lid is slightly damaged (see picture) and the potentiometer of the cutter would have to be changed, as it cannot be finely adjusted. Video of the test run available, can be sent via Whatsapp. It is a very heavy and powerful machine for professional use. In addition to the dies for spaghetti and tagliatelle as well as pasta sfoglia (dough sheets or wide dough sheet for lasagna), there is also a die for croissants or a special shape. The mixing shaft can be removed without tools and the stainless steel screw can be pulled out to the front. Machine must be thoroughly cleaned before use Video of the test run and more pictures available
Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/U - Drilling spindle speeds in gear stages 95 - 2000 rpm - Right - Left - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - distance table – drilling spindle 500 mm - distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm - Lighting - Coolant device - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg
brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50
With matching spacer rings according to photos. Scope of delivery according to photo 1.
Travel X-axis 600mm Y-axis 400mm Z-axis 300mm U-axis ±50mm V-axis ±50mm Max. workpiece dimensions 990 x 620 x 295mm Max. table load 550Kg Max. Konik ± 21º / 100 mm Machine weight 3700Kg Machine height 2210mm Machine dimensions 2480 x 2980mm Standard Wire Diameter 0.15 to 0.3mm Max. Weight of Wire Spool (kg) 10 kg (P10) Surface quality Ra 0.35 Capacity of the water system (l) 1000 Machinery equipment Transformer Windows CE Touch Screen Controller Auto Wire Threading (AWT) SD Master Tubular Linear Actuator Collision protection X/Y/Z/U/V axles 0.1 μm linear scale resolution PC Acrylic Filter Tank Cover Standard Remote Box Water Chiller Float Gun Safety door lock 3 Filters Water Tank Design CE Conformity Configuration Clean water tank
Used flow pack packaging machine. Manufacturer Chemosvit Strojchem, model BH-07W. New 2017. Capacity 15-250 pcs/min. Available 3 pcs. (2 used and 1 almost unused)
x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.
Auction-ID: A1-50656-138
Key data: 650 mm, 5000 mm, 390 mm
TOS SUS 63/5000 heavy-duty center lathe Czech manufacturer TOS. Capacities & Workpiece Dimensions • Distance Between Centers: 5000 mm • Max. Swing Over Bed: 650 mm • Max. Turning Diameter: 630 mm • Swing Over Cross-Slide: 390 mm • Max. Workpiece Weight Capacity: Up to 6000 kg (at lower speeds) • Unhardened Bed Dimensions: 580 mm x 819 mm Headstock & Spindle Specifications • Spindle Bore (passage): 80 mm • Spindle Taper: Metric 100 taper • Spindle Center: No. 5 Morse center • Number of Spindle Speeds: 22 standard speeds • Spindle Speed Range: 9 to 1120 RPM • Spindle Drive Motor Power: 18 kW (approx. 24 HP) feeds, threading & tailstock • Longitudinal Feed Range: 0.049 to 3 mm/rev • Cross Feed Range: Half of the longitudinal feed speed rate • Rapid Traverse: Equipped with directional motorized rapid travels on the carriage ...
sheet width: 2500 mm plate thickness: 30 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210015 Type of machine Hydr. 3-roll bending machine Make HAUSLER Type RMA 2500/30 Build in 1962 Type of control conventional Additional information max. widht 2500 mm Max. plate thickness 30 mm 3 rolls diameter upper oll 450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm arm length: 1500 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5000 mm y-travel: 3100 mm z-travel: 1200 mm Control: total power requirement: 20/27 kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15x6,2x6 m Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a workshop-overhauled notching milling machine from the renowned manufacturer Elumatec, type AF223, built in 1998. As part of the workshop overhaul, the machine was dismantled, cleaned and reassembled. It was almost completely repainted. The bearings on the spindle and motor were replaced. The plate was professionally sanded and galvanized. Other galvanized parts were also largely re-galvanized. The following new parts have been installed: - Pneumatic cylinders - Guide rails and linear layers - Clamping cylinders and rubber buffers - Protective cover - Hinged lid - Mudguard - Protective sliders on the right and left - Protective slider on the side with brush - Lever at the stop - Lever on the front spindle - Bearings on the spindle - Protective hose - Scale on the plate - Scale at the stop - Regulator - Oiler - Small parts (bearing sleeve, spindle sl ...
table length: 3000 mm table width: 2500 mm table load: 40 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210059 Type of machine Rotary table Make SCHIESS Type 25/30 Type of control X-stroke (mm) 2.000 Table dimensions (mm) 3.000 x 2.500 Table rotation (degrees) 360 Additional information Max. tableload 40 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-A, AD Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sys ...
used
GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...
used
GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...
grinding diameter: 250 mm grinding length: 650 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Glauchau Type: SI 6/3 CNC brand: Siemens CNC model: Sinumerik Year of make: 1997 CNC controlled Maximum grinding depth: 250 mm Grinding diameter: 650 mm ø Rapid traverse: 10 m/min Speed: 50 - 500 RPM Inner grinder X (inner grinding device): 155 mm Length displacement interior grinding device on the table: 540 mm Tool grinding device Z (table move): 700 mm Circulation diameter: 650 mm ø Grindig diameter for internal grinding: 10 - 500 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Printing press for cardboard manual. Genuine antique piece Auction-ID: A3-46142-12029
x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Leaking oil working condition, hardly used Auction-ID: A3-46142-11240
equipped with foot control Auction-ID: A3-46142-6013
Synchronization for 2 cylinger perfectly equal to move Leak-proof Auction-ID: A3-46142-11318
table length: 2750 mm table width: 2750 mm table load: 80 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210070 Type of machine Rotary table Make ASQUITH Type 2750/80 Build in NB Type of control conventional X-stroke (mm) 2200 Table dimensions (mm) 2750 x2750 Additional information max. table load 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GeneralUniversal Milling Machine; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Benefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe) Spindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / ...
table length: 2200 mm table width: 2200 mm table load: 16 t Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210063 Type of machine CNC Rotary table Make TOS Type SK 16 Build in nb X-stroke (mm) 1500 Additional information Table size 2200 x 2200 mm max. table load 16 ton controlled by a machine with a Heidenhain TNC 426 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bous Waschfix Industrial cleaning and degreasing system The system is ideal for workshops, production plants, mechanical engineering or automotive companies for automatic and thorough cleaning and degreasing of workpieces, machine parts and tools. The device cleans highly efficiently using a hot water spray (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, handling is absolutely safe and uncomplicated. • Integrated ultra-fine filter for a longer service life of the wash water and cleaner cleaning results. • Integrated drain pump for effortless pumping of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: ...
Bous Waschfix cleaning and degreasing system For sale is a professional, industrial parts cleaning system / washing system of the type "Waschfix". The system is ideal for workshops, production companies or metalworking companies for the thorough cleaning, degreasing and care of components and workpieces. The system is robustly built and has an external, high-quality pump and stainless steel filter unit for cleaning the washing medium as well as a clear control system. The device cleans highly efficiently using a hot water spray (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, handling is absolutely safe and uncomplicated. Technical data Manufacturer: Bous Type: Waschfix Production number: 18251 / 2001 Capacity: 120 litres Permissible cleanin ...
Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.
turning diameter: 800 mm turning length: 1500 mm swing diameter over bed slide: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Next image can not be found: d833 tacchi mt400 (2) Brand: Tacchi Type: MT400 Distance between centers: 1.500 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 250 mm ø Swing in the gap: 550 mm ø Spindle boring: 130 mm ø 3-Jaw chuck: 390 mm ø Digital read-out Rapid traverse on longitudinal and cross travelling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
500 € 
