injection moulding machines used for sale

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2013 SAR/SEPRO SR 5X-35HL S5 TRANS Injection robot Machine where functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 420-700-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

Windsor Klöckner W2700 - 27780 Injection Molding System Wittmann handling system included Injection Volume: - Strock volume: 20300 cm³ Clamping Force: - Schließkraft: 2700 kN Injection Pressure: - Einspritzdruck: 1360 bar Main Connection: - Network 1: - Voltage: 500 Volt - Frequency: 50 Hz - Total Power: 418 kW Cooling Water: - Volume: Not specified - Max Temperature: 32°C Weight: - Total Weight: Not specified Find more here - / Contact us at -

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - / Contact us at -

Andouart extruder

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

Manufacturer: ENGEL Model: VICTORY 740/150 Electric Year of Manufacture: 2006 Type of Machine : Injection Molding Machine Weight: 10,900 kg Tonnage : 150 SC Ø : 50 Find more here - / Contact us at -

Manufacturer: ENGEL Model: VICTORY 940/200 Electric Year of Manufacture: 2007 Type of Machine: Injection Molding Machine Weight: 14,900 kg Tonnage : 200 SC Ø: 60 Operating hours: 98,485 Find more here - / Contact us at -

Manufacturer: ENGEL Model: VICTORY 740/150 Electric Year of Manufacture: 2006 Type of Machine : Injection Molding Machine Weight: 10,900 kg Tonnage : 150 SC Ø : 50 Find more here - / Contact us at -

Manufacturer: ENGEL Model: VICTORY 940/200 Electric Year of Manufacture: 2007 Type of Machine: Injection Molding Machine Weight: 14,900 kg Tonnage : 200 SC Ø: 60 Operating hours: 98,485 Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2000 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles : 4,109,156,293 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2001 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :1,776,716,771 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2000 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles : 4,109,156,293 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2001 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :1,776,716,771 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Arburg Model: 320C / 600-250U Year of Manufacture: 2010 Specifications: - Clamping Force: 60 tons - Screw Diameter: 30 mm - Operating Hours: 59,165 - Cycles: 2,140,296 Find more here - / Contact us at -

Manufacturer: ENGEL Model: EM 440/150 Year of Manufacture: 2007 Specifications: - Clamping Force: 150 tons - Screw Diameter: 35 mm - Operating Hours: 58,724 Find more here - / Contact us at -

Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -

Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2

Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot Find more here - / Contact us at -

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - / Contact us at -

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

2012 KRAUSS MAFFEI 850-1400-1000 MX Z Injection moldin machine missing electrical and mechanical parts Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

Manufacturer: Krauss Maffei Model: 800-5700 MC Year of Manufacture: 1999 Technical Data - Clamping Force: 8000 kN - Platen Size: 1600 × 1510 mm - Tie Bar Distance: 1120 × 1000 mm - Mold Height: 600 – 1100 mm - Daylight (Platen Opening): 2000 mm - Total operating hours (machine switched on) : currently 02,193.40 - Operating hours in production : currently 82,849.13 - Heating Capacity: 59 kW - Control: MC4 Injection Unit - Screw Diameter: 105 mm - Shot Volume: 3611 cm³ - Injection Pressure: 1580 bar - Dimensions (L×W×H): 10.15 × 2.86 × 2.40 m - Pump Drive Power: 110 kW - Oil Tank Capacity: 2000 L - Machine Weight: approx. 45 tons Features / Extras - 8 temperature control zones + 2 additional zones for plasticizing heating - 4 core pulls with movable platen - Hydraulic rotary bolt shut-off nozzle (HSVS) - Air valve (1x on movable platen, WAP) - T-slots in clamping plates ac ...

Rep M46 Injection Moulding Machine Size of platens 430x430mm Injection unit short volume 670cm3 Injection pressure 1690 bar Injection force 331kN

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Clamping Force: 200 ton

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Clamping Force: 220 ton // Shot Weight (Max): 625 g

Rutil Vertial Injection Moulding Machine Year of manufacture: 2001 Type: Injection Configuration: Vertical Clamping force: 350 tons Injection volume: 2000 cc Upper intermediate frame: Yes Lower intermediate frame: Yes Heater plate dimensions: 600×650 mm Tie bar distance: 600 / 340 mm Additional heating option: Yes Sliding plate: Yes

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - / Contact us at -

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -

Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - / Contact us at -

200 ml bottle form set with shampoo nut