injection moulding machines used for sale

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

We are pleased to offer for sale a Siemens SIPLACE SMT Machine Package, composed of the following equipment: ( tray units / accesories included ) 1.SIPLACE F5 HM Year of Manufacture: 2004-2006 Weight: 2,320 kg Technical Specifications - Operating Pressure: 5.5 – 8 bar - Air Flow: 300 Nl/min - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 3.3 A - Power Consumption: 1.8 kW - Circuit Protection: 3 x 16 A breakers - Max Motor Current (Rated): 16 A 2.WPW/3-900 Year of Manufacture: 2006 Weight: 230 kg Technical Specifications - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 0.7 A - Power Consumption: 0.4 kW - Circuit Protection: 3 x 6 A circuit breakers - Max Motor Current (Rated): 6 A 3.SIPLACE 80 S-15 HM Year of Manufacture: 1999 ...

Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 450 mm Distance between tie bars: 560 x 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Opening width: 1050 mm Platen size (h x v): 790 x 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,10 x 1,90 x 2,10 m Machine weight: 8400 kg Robot Producer: Krauss Maffei Type: LRX-100 Year: 2012

Ref. no.: 18591 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Height=0.82 m, Overall length= 1.01 m, Overall width= 1.12 m, In store Made in Denmark Description Capacity of 800 – 1000 trays per hour 3 main brushes for cleaning made of polyamide 2 brushes for cleaning of perforated trays All brushes can be adjusted individually to prolong the lifespan Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes The whole machine can be cleaned with water External oil container with sight glass and circulation pump Mobil scrapings container

Extrusion line for drip irrigation

Used Used Case Packer Machines TMG: Year: 2018 Condition: Good Used Case Packer Machines TMG Year: 2018 Speed: 5.000 bph Gluer | glue closure from below Safety protections Case packer tmg Box closing machine tmg Code: JM 91 More details: https://bottlingscout.com

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

Capacity: 180 × 100 mm Configuration: 4 shafts Bottom with reference: 4 kW Right: 3 kW Left: 3 kW Top: 4 kW Electric raising and lowering 4 tool holders included Chain drive Jointing table 1.70 m Dimensions (estimate): approx. 2,900 × 1,600 × 1,600 mm (to be confirmed) Weight (estimate): approx. 1,750 kg (to be confirmed) Auction-ID: A1-45443-71

Engel injection moulding machine old

Control CC 100 for ENGEL injection moulding machines

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Container Size (Max.): 2,5 l

Injection stretch blow moulding machines for PET bottles

Key data: 1500 kN

Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.

Key data: 2000 kN, 352 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Key data: 62 kN

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to part ...

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 50 mm Spraying weight: approx. 395 g Spray pressure: 2332 bar Dosing volume: 422 cc Clamping unit : Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 32,609 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant t ...

Haitian MA1600IIS with the Hilectro V-800IS robot / hybrid machine Year of Make: 2020 Injection unit: Screw diameter: 45 mm Injection weight: 291 g Spray pressure: 1780 bar Dosing volume: 320 ccm Clamping unit : Clamping force: 160 t Spar spacing: 470x470 mm Size of the clamping plates: 700x700 mm Ejector: hydraulic Clamping unit: toggle lever Control: Keba - Touch Screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication It is possible to change the screw diameter Hilectro V-800IS robot Year of Make: 2020 5-axis robot: 4 axes are driven by servo motors (electric): X, Y, Z, B (rotation) Touch control panel Robot with adapt ...

with spare screw, high-pressure hose and various spare parts - see pictures

Description New screw

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Description Equipped with Robot S400

Description