injection moulding machine used for sale

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

Licon LiFLEX II i³ 766 DT B22 Precise mechanical machine Operating hours: approx. 40,148 h power: 150 KW The LiFLEX II i³ 766 sets new standards with its groundbreaking i³ technology, which combines two spindles in one machine. With double spindles and maximum accuracy, it enables a stable and precise machining process like never before. Thanks to independently adjustable motor spindles in the Z axes and a 5-axis configuration, this machine offers maximum performance in every operation. The generous spindle distance of 750mm and the generous working area of ​​X 750 Y 660 Z 650 enable the machining of a wide range of workpieces with ease. Temperature sensors with innovative algorithms reduce the influence of different temperatures on the positioning accuracy of the motor spindles, while the Watt Pilot ensures reliable drill breakage control. The LiFLEX II i³ 766 is not onl ...

3x VERSATRONIC RV1s P&P machines which are slow (1200cmp/h) but full fully functional and with a lot of feeders. These machines were manufactured in a UK factory Versatronic. Machine were named Violer, Rosie and Blue. The last one is faster, little better software for fiducial camera for components. All machine are working and were used for prototype and low series like 50pcs electronic or 25pcs or 200pcs electronic. All P&P machines have two cameras, one for fiducial (up camera) and one (down camera) for components. Machines can place without problem components down to 0402 and fine pitch component like QFN or VFQFPN48… Speed for firs two is 1200cmp/h the last one is around 1500cmp/h. All machines have tool changer with 10 positions and one tool for camera auto calibration. Only 5 different tools were used but can be used up to 10 different tools. On one machine you can put u ...

2001 & 2002 HYUNDAI HIT 15 2X HYUNDAI HIT 15 turning machines equipped with QUICK LOAD portal and two stockers (loading and unloading) Both machines are currently working. Ordinary maintenance can be proved by invoices. Turning machine G1 Hyundai HIT-15 (single spindle with tailstock, no axis C) Year of manufacture: 2001 Turning machine G2 Hyundai HIT-15 (single spindle with tailstock, no axis C) Year of manufacture: 2002 Quick Load portal Year: 2003 Find more here - / Contact us at -

Mitutoyo QUICK VISION ACTIVE 202 Optical measuring machine (Vision Measuring Machine) from the manufacturer Mitutoyo Specifications (See pictures) High efficiency No constant supervision is required. The operator can carry out other tasks. Minimisation of error sources Automatic edge detection The automatic edge detection function enables high reproducibility of measurements, regardless of the reproducibility of measurements. Image autofocus The image autofocus function enables reliable height measurements at high speed. Continuous measurement of multiple workpieces Grinding function With this function, a large number of workpieces positioned on the large number of workpieces positioned on the device are on the device in a single operation. Automatic measurement can be started after be started after rough positioning Pattern search The pattern search function automat ...

2019 Soft Energy Controls CES0007 Ranking machine End of line testing machine which sorts and grades cylindrical and prismatic battery cells. It is quite a specific piece of equipment, but it has some components that have value and could be repurposed in other machines. Originally from Japan. Main functions: DCIR testing and grading of cells Sorting of prismatic and cylindrical cells based on the cell grade into trays Find more here - / Contact us at -

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - / Contact us at -

2017 Trumpf TruDisk2002 (FD24) A laser device with chiller in excellent technical condition Manufacturer: Trumpf Type: TruDisk 2002 (FD24) 380 V -10%... 460 V +10%, 3AC +PE 11,8 kW/12,6 kVA 18 A/400 V IP 54 50... 60 Hz July 2017 4/2LLK: 550/470 kg Icn/SCCR 13 KA Find more here - / Contact us at -

Metallkraft MTBS 3100-40 D The Metallkraft MTBS 3100-40 D is a heavy-duty, motorized metal shear designed for industrial use. Cutting Capacity: Maximum cutting length: 3100 mm Maximum sheet thickness: 4.0 mm Construction and Design: Heavy and stable welded construction Low cutting angle (1.3 degrees) for minimal distortion and burr-free cuts Equipped with plastic-coated material hold-downs, manually adjustable width stop, and angle stop Motor and Performance: Motor power: 7.5 kW (10 HP) Voltage: 400 V, 3-phase Cutting speed: 42 cuts per minute Dimensions and Weight: Overall dimensions: 3650 mm x 2260 mm x 1330 mm Weight: Approximately 3600 kg Additional Features: Electrically adjustable rear stop up to 750 mm (optional up to 1000 mm) Ergonomic working height Self-lubricating and adjustable slideways High-quality roller bearings Operated via foot pedal, allowing hands ...

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - / Contact us at -

2002 Kettner BLITZPAC E 35 T1 Wrapping machine Machine type: wrapping machine BLITZPAC E 35 T1 Year of construction 2002 Equipment for up to 9 people Voltage 230/400V 50Hz Frequency 50 Hz +- 2% Apparent power ~ 15 KVA Active power ~ 11 KW Overpressure 5 bar Dew point: -5 °C Filter: 40 micro Air consumption P x 0.0002 m3 Weight: approx. 4300 kg Floor load 8 x 6750 N Alignment angle +- 1° Sound level =

Gallus R200 (refurbished by Graficon in 2005) Label printing machine Machine definition 1 UV rotary screen + 7x UV letterpress + 1 UV flexo Rotary hot stamp unit (after 5th unit) Printing to glue / liner (2 units) 2x rotary die cutting unit Longitudial slitting Technical parameters: Max. width of material: 222 mm Max printing width: 205 mm Magnetic cylinders: 72, 78, 84, 90, 96, 132, 136 teeth Printing cylinders: 72, 78, 84, 90, 96, 103, 110, 117, 124, 132 teeth Collars for screen: 110, 117, 124, 132, 144, 156, 168 teeth Cores for hot stamp: 72, 78, 84, 96, 103, 110, 117, 124 teeth Find more here - / Contact us at -

1984 Schlüsselbauer Magic 1211 Manufacturer Information: Name: Maschinenbau Schlüsselbauer Machine Details: Model: Schlüsselbauer Magic 1211 Year of Building : 1984 Voltage : 380 V Control Voltage : 24 V Connected Wattage : 50 kW Frequency : 50 Hz Weight Total : 16,000 kg Country of Manufacture: Made in Austria 1984 Ernst Wagner KG Reutlingen HGU 3000 Type: HGU 3000 Load capacity: 3,000 kg Year of construction: 11 / 1984 Weight without battery: 4,410 kg Weight with battery: 6,410 kg Battery weight: min 200 kg / max 200 kg Find more here - / Contact us at -

Ultrasonic welding machine for the production of thermal solar absorbers Dimensions and Material Specifications: - Pipe Diameter Options: 8, 10, 12, or 15 mm - Material Thickness: - Copper Sheet: 0.12 to 0.5 mm - Aluminum Sheet: 0.3 to 0.5 mm - Sheet Width: Up to 200 mm - Programmable Welding Length: 1 mm to 9999 mm or continuous - Overall Height: 1250 mm - Overall Depth / Width: 1100 mm / 900 mm - Table Height: Adjustable to 900 mm - Total Weight: Approximately 150 kg Electrical and Pneumatic Requirements: - Supply Voltage: 230V | 50Hz - Power Consumption: Maximum 3500 VA - Compressed Air Supply: Minimum 300 liters/min at 8 bar, clean and dry Performance and Features: - Mechanical Repeatability: Less than 0.2 mm - CNC Module: B&R with CAN-BUS connection for frequency inverter - Memory: 128 MB CF card for programs - Interfaces: - 1 x RS 232 - 1 x USB - 1 x Ethernet - Control Panel: ...

2016 Hexagon OC 322 Measuring machine The machine is in perfect working condition. The 2016 Hexagon OPTIV CLASSIC 322 is a type of coordinate measuring machine (CMM) manufactured by Hexagon Manufacturing Intelligence. This machine is used for precision measurement and quality control in manufacturing processes. PRODUCT DESCRIPTION The Optiv Classic 322 combines optical and tactile measurement in one system (optional touch-trigger probe). The system supports multi-sensor measurements using the Vision sensor (CMOS colour camera, motorised CNC zoom) and the touch-trigger probe HP-TM. The Optiv Classic 322 provides easy pallet station integration with good accessibility to the measuring table from all sides. Measurement software is PC-DMIS. FIELDS OF APPLICATION • Shop floor and inspection room • Versatile geometry measurements and GD&T analysis DESIGN Design principle : Ben ...

Two group sander ideal for deburring, rounding edges and obtaining a perfect finish, thanks to the initial abrasive belt for removing excess burr and a carousel group with 8 abrasive brushes that rotate both clockwise and counterclockwise for a uniform result on the whole piece. The perfect machine for an excellent finishing quality. Independent control of the work groups via electronic touch screen panel, variable speed of the groups for a better finishing result. Table with vacuum system to guarantee the seal of the piece during processing. Quick release system for changing brushes and belt. The staggered arrangement of the brushes means allow that during the rotation the piece is always processed all over. Also suitable for processing surface treated material. Technical Specifications: - Working Width: 1350 mm - Abrasive Belt Speed: 1370 mm x 2200 mm - Abrasive Brush Dimensions: 300 ...

Model: MH 1200 S Manufacturer: MAHO Type of machine : Milling machine Condition : Used Find more here - / Contact us at -

Manufacturer: Merz Model Type/Number: MP-2 / 109-1 Year of Manufacture: 2002 Year of Modification: July 2008 Electrical Connection: 400V, 3.5 kW, 50 Hz Heating Voltage: 230V AC Control Voltage: 230V AC / 24V DC Compressed Air Requirement: 6 bar / L-min The Merz MP-2 is a type of rotary tablet press machine, used in the pharmaceutical and nutraceutical industries to produce tablets. Merz, a manufacturer known for creating industrial machinery, developed this type of tablet press to efficiently compress powders into tablets. Key features of the Merz MP-2 include: - Rotary Operation: It operates in a rotary fashion, meaning it has multiple stations or dies that rotate, allowing for a continuous and efficient process of powder filling, compression, and tablet ejection. - Versatility: The machine can be configured to produce tablets of different shapes and sizes by changing the tool ...

CTK 2200 Kaschieranlage: - Type: CTK 2200 - Nominal Width: 2,200 mm - Product Width: 2,200 mm - Working Height: 1,220 mm ± 50 mm - Processing Side: One-sided from above - Control Side: Right - Fixed Edge of Machine: Right - Machine Speed: 10 – 30 m/min - Max Production Speed: 25 m/min - Passage Height: 80 mm - Dimensions: - Total Width: 3,000 mm - Installation Length: 11,000 mm - Working Width: Max 2,150 mm - Height: 5,700 mm - Weight: Approximately 9,500 kg - Load Capacity: 80 kg - Maximum Cycle Speed: 10 cycles/min - Power Supply: 400 V / 50 Hz, 3 phases, and control voltage 230 V / 50 Hz + 24 V/DC​ In the event that the buyer wishes to laminate the panels on both sides, we can also offer a suitable stacking turner. Seen on the last picutre Find more here - / Contact us at -

Year of Manufacture : 2021 Model : TEMPORA 45.03L Type of machine : Edge banding machine Manufacturer: Format-4 Voltage: 400 V Phase: 3 PH Frequency: 50 Hz Current: 22.8 A Power: 14.5 kW Minimum Air Pressure: 7 bar Find more here - / Contact us at -

Manufacturer: BOEHL Model: BA24-15-54 Year: 2013 Voltage: 230 Volts Frequency: 50 Hz Find more here - / Contact us at -

Manufacturer: ALPA Model : RT 2100 Type of machine : surface grinding machine Year of manufacture : 1997 - Max workpiece width: 600 mm - Max workpiece length: 2100 mm - Magnetic table: 2000 x 400 mm Equipped with: - Wheel dresser - Electronic control unit Mod. MT 2000/R - Electrospindle for conical grinding - Electronic plate from Tecnomagnete - Coolant tank Find more here - / Contact us at -

hydraulic drilling and milling machine Rotary table included Manufacture Details: - Manufacturer: Société Genevoise d´Instruments de Physique (SGIP) - Model: Hydroptic (with reference to a sub-component "Rotoptic-6") - Serial Number: Specific series number mentioned for traceability and maintenance Table Specifications: - Length: 1100 mm - Width: 842 mm - Max T-Nut Length: Noted as 800 mm with spacing details on the machine table - Max Load Capacity: 800 kg Machine and Operation Specs: - Spindle Type: Morse No. 4 taper with both internal and external fitments per DIN 2202 standards - Spindle Speeds: Ranges from 40 rpm to 2000 rpm across 18 settings - Table Motion: Hand-adjustable hydraulic shift and rapid traverse capability up to 1100 mm - Vertical Clearance: Max clearance of 2385 mm - Feed Rates: Adjustable between 25 to 300 mm/min - Total Weight: Approximate gross weight wit ...

Manufacturer : MININI Model : PL 65-10 Year of manufacture : 2005 Type of machine : Surface grinding machine - Max width: 600 mm - Max length: 1000 mm Equipped with: - Electronic magnetic table 1000 x 600 - Fume extractor - Coolant tank Find more here - / Contact us at -

Manufacturer: KOVOSVIT Model : VO 50 Year of Manufacture: 1995 Condition: Used Weight (Kg): 4300 kg Find more here - / Contact us at -

Machine Type: Center Grinding Machine Manufacturer: Henninger Model: ZS 200 Year: Not specified - Max Workpiece Length: up to 2000 mm - Workpiece Diameter: 285 - 325 mm - Center Diameter: 2 - 110 mm - Bore Taper: 50 - 120 mm - Center Height: 165 mm - Wheel Diameter: 10 - 60 mm - Grinding Wheel Speed: 9150 - 18300 RPM - Power: 0.4 kW - Weight: 0.5 tons Equipped with: - Pneumatic centering device

he KARG 2/S is a double twist bunching machine designed for the wire and cable industry. Manufactured by KARG, this machine is utilized for twisting multiple wires or strands together to form cables or bundles, a critical process in cable production. In the context of a 2000 KARG II-S, it is likely a model from the year 2000, serving a similar function in the wire and cable manufacturing sector. For detailed specifications and capabilities of this specific model, consulting the manufacturer´s documentation or contacting them directly would provide the most accurate information. The following accessories are available: Gear set shown in a picture for common lay lengths, see Excel file 7-fold roller set as used in the video On request, about 10 drawing dies made of carbide with signs of wear, which would first have to be reworked by the customer Operating instructions etc... We com ...

1) Twin Vitacount 12-2 The Vitacount 12-1 is the lower cost solution designed for vitamin applications, yet it combines proven product feed technology with electronic controls and infrared count heads as used on the higher specification machines. The 12-1 features 12 product feed tracks. The Vitacount features an integrated chip and dust extraction system. A touch screen control panel allows easy access to machine and product parameters, giving the operator good visibility of the complete filling process. The product library can store up to 1000 different set-ups and offers instant recall of both product and machine parameters. Vitacount is height adjustable by means of the manually adjusted telescopic funnel arrangement to allow differing heights of bottle to be filled and the system offers maximum versatility as product feed system requires no change parts and is capable of packagin ...

Shipping packer Dispatch packing machine Type HE F 470 / BDS Year of construction 2008 / 2002 Find more here - / Contact us at -

Progress MSR 20/6 Straightening and Bending Machine - Year of Manufacture: 2015 - Wire Diameter: 8 mm - 20 mm - Straightening Length: 500 mm - 14,000 mm - Rotor Straightening System: Equipped with a feed unit - Automatic Wire Diameter Changeover - Max Feeding Speed: 160 m/min - Stationary Shear - Includes: 6 reels, each with 5-ton coil capacity The 2015 PROGRESS MSR 20/6 is a specialized bending machine used primarily in the construction and manufacturing industries for processing reinforcing steel bars and wire. Manufactured by Progress Maschinen & Automation AG, this model is designed for high efficiency and precision in bending and cutting operations, particularly useful for creating structural reinforcements. Key Specifications and Features - Bending Capabilities: The MSR 20/6 is typically equipped to handle multiple wires simultaneously, up to six wires with a diameter around 6  ...

Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used Find more here - / Contact us at -

Manufacturer: VICI Designation: Optical Measuring Machine Machine Type: M909 (MTL TECNO) Year of Construction: 2022 Weight: 237 kg Electrical Supply: 230 V / 50 Hz Phases: Three-phase Included Components: - Computer System: - Fully configured computer - Pre-installed software - Security dongle for licensed software access - Accessories: - Computer Cabinet: Organized and compact for clean operations - Center Point Set: Includes interchangeable inserts for versatile measurements - Three-Jaw Precision Manual Chuck: Model PHSF 100 for secure and precise part holding Find more here - / Contact us at -

Manufacturer: SME Model: TTV-3L Year of Manufacture: 2013 Welding Method: TIG Welder: Fronius TransTIG 2200 Control System: Siemens-based PLC Application: Pipe welding in a straight line with adjustable height and length of weld Machine Stations: - Operator loads the part - Automatic welding process - Part ejection mechanism Condition: Used but fully functional Find more here - / Contact us at -

Manufacturer: Timesavers Grindingmaster Type of Machine: Grinding Machine Model: 81 series Condition: used Machine Hours: 2963,9 h Find more here - / Contact us at -

Manufacturer: FANUC Type of Machine : Welding Robot Condition: Used Find more here - / Contact us at -

Manufacturer: Peddinghaus Model: FDB 600 Type of Machine: Flat steel drilling and burning machine Find more here - / Contact us at -

grinding diameter: 600 mm grinding length: 2000 mm centre height: 320 mm workpiece weight: 1200 kg workpiece weight in steadies max.: 5000 kg grinding wheel size: 760 x 304,8 x 75 mm grinding wheel turining speeds: 500 - 1400 U/min turning speed range - workpiece: 5 - 150 U/min main drive motor: 22 kW workpiece drive: 12 kW Control: Fanuc 0i Mate-MD total power requirement: 42 kW weight of the machine ca.: ca 10 t dimensions of the machine ca.: 11 x 2,9 x 1,8 m equipped with: - CNC control FANUC Series 0i Mate-MD - tailstock - 5 closed steady rests - 4 support blocks - Splash guard doors - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m

Key data: 420 mm, 1524 mm, 3300 1/min

Stock number: 3963 CNC LATHE Manufacturer: MAZAK, Type: INTEGREX 400 III-S Machine NO.: 173882, Year of manufacture: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About Bed 850 mm Dia. Turning length 1524 mm Main motor power 30 kw Main spindle speed range 3300 rpm Drilling through drawing tube 102 mm dia. C axis - head spindle movement 0.001 degrees Y axis +/- 115 mm B Axis Movement -30/+195 degrees B axis spindle speed 12000 rpm B axis spindle effect 18.5 B axis tool system Capto C6 Sub-spindle C axis - counter pindle movement 0.001 degrees Engine power sub-spindle 26/22 Kw Total Power Consumption 99.9 kva Control Mazatrol 640 Fabr. Spindle Hours 7167 Hours Controlled in 6 Axes Accessories: ATC Tool magazine with 40 stations Hydr. Chuck main spindle 300 mm dia Hydr. Chuck Subspindle 300 mm dia  ...

Key data: 1350 mm, 11000 mm

CNC Lathe Make Swift CNC Fanuc 21i-MB Inspection Under Power Year 1978 Between centers .. 11,000 mm Swing over Bed .. 1,350 mm Swing over Carriage .. 1,000 mm Chuck dia .. 1 ,200 mm Max. Workpiece weight …….. 20 ton Motor power ………………………… 40 kW RPM …………………………………………….150 c/w 2 steadies

Description HERSTEL Vertical Lathe VDM 120 Details Year of construction 1998 Control Siemens Sinumerik 840C Flexos Max. turning diameter 1,300 mm max. circulating diameter 1,400 mm (option 1,500 mm) Axis stroke Z/X axis 1,000/1,000 mm (option 1,000/1,500 mm) Dimensions to top edge of spindle 940 mm Main Spindle Bearing Circulation Lubrication 2-speed manual transmission autom. Range switching Main spindle motor 76/115 kW Clamping device diameter 1,600 mm Chuck pick-up centering diameter 790 mm Max. feed force Z-/X-axis 25,000 N Axis speed Z-/X-axis 0.01 - 14,000 mm/min. Disc turret with B-axis Tool holder modular system UTS 50 Main dimensions approx. 6,250 x 3,300 x 4,500 mm incl. documentation

Used Schur packaging machine type Y30054. New 2021. The Schur packer is an all-in-one solution for high packaging flexibility. It offers multiple filling options - including horizontal and vertical filling - to suit virtually any product. Designed with exceptional flexibility in mind, the Schur allows multiple bag formats in a wide range of innovative shapes, and even multiple products, to be packed on a single line. Changes are quick and easy, and there are no additional tooling costs.

engine: 2,8 KW weight of the machine ca.: 320 kg dimensions of the machine ca.: 86 x 90 x 85 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. Drilling Diameter... 50mm Spindle holder ... ISO 50. Max. vertical arm adjustment ... 875mm Max. distance of the spindle axis from the stand ... 1250mm Main engine power ... 4kW Total power requirement ... 6kVA L x W x H ... 2750 x 1120 x 3271mm Machine weight ... 4550kg

- Roll to roll cutter -Year 2008, max roll diameter 450 mms. -Max width 360 mms . -Inverter with speed control -Many cutting devices for any size

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

JAFO FWF 32 universal milling machine was manufactured in 1989 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine, distinguished by its high functionality, versatility and reliability, is used for precision machining of workpieces. The stable design made of high-quality cast iron has, among others, an pull-out beam and a table with a large working area. The vertical torsion spindle used can work with a wide range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32 vertical milling machine weighs 2280 kg. Technical data of the JAFO FWF 32 milling machine - work table surface (L x W): 1300 x 320 mm - distance between spindle end and work table: 430 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam - arm for removing vertical spindle - installed power: 7,1 kW - power supply: 3 ...

Width 52 cm Year of construction 2002 Automatic Paper Folding Machine Computer control with monitor Flat pile feeder FSA 52 with suction head 1st station: 4 fold pockets 52 cm Downstream knife shaft 2nd station: 4 fold pockets 52 cm 3rd station: 2 fold pockets 38 cm Shed display Price on request. We deliver and install worldwide!

For sale is a Krones Ergomatic labeller in mint condition. The system can be used for large, small and small glass, as well as bottles. Top condition. Is given away inexpensively.

A lid/tray packer from the manufacturer Somic is sold. The SOMIC Lid/Tray Packer is suitable for open cartons and lid/tray packaging. The facility has been used very little and is in absolute top condition.