injection moulding for used for sale

BTS 200 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 gt; 1,5 mm winding diameter: max 40 mm 18 gt; 445 pieces/min power: 1,5 kW length: 990 mm width: 1000 mm height: 1600 mm weight: 610 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

BTO 236 spring coiling machine + AB1 decoiler cap wire diameter: 1 gt; 3 mm winding diameter: max 70 mm max spring length: 180 mm max length of leg: 80 mm speed: 80 m/min power: min 9 kW / max 13,4 kW length: 1500 mm width: 1100 mm height: 1500 mm weight: 1300 kg

BX 400 spring coiling machine + AB2 decoiler cap wire diameter: 0,8 gt; 4 mm winding diameter: max 70 mm speed: 180 m/min (max 90 pieces/min) power: 6 kW length: 1400 mm width: 1350 mm height: 1900 mm weight: 2200 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,2 gt; 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 1300 mm weight: 620 kg

max wire diameter: 4 mm max strip width: 40 mm table dimensions: 860 x 860 mm internal diameter of tube support: 100 mm max 9 toolholders can be installed on the table

max wire diameter: 4 mm max strip width: 40 mm table dimensions: 860 x 860 mm internal diameter of tube support: 100 mm max 9 toolholders can be installed on the table

Load capacity: 2500kg, unladen weight: 4115kg. The forklift is still in use and in perfect condition.

One forklift including charger. Operating hours: approx. 22000h. Battery defective. Documentation available.

Lifting capacity: 2500kg, lifting height: 5000mm, fuel: gas, operating hours: 19621h, weight: 3865kg.

Max. total load: 5t, weight: 8.89t, without accessories, spare parts or documentation, was maintained regularly.

Load: 1.1t, battery weight: 1.065-1.175t, motor power: 5kW, weight: 4.14t, operational hours counter: 2580h.

Including battery charger.

Max. load: 910kg, weight: 2.93t.

Nominal load: 8t, weight: 12.3t, operational hours counter: 5166h, including three meter long forks, without documentation.

The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.

Max. load: 5t, lifting height: 4100mm, installation height: 2971mm, free stroke: 150mm, tires: Super Elastik solid rubber 300-15, Super Elastik solid rubber 250-15, operating hours: 15,200h, with overhead guard SDFHT full cab, heating and air conditioning, double auxiliary hydraulics and pallet clamp Meyer, an on-site inspection is possible.

Load: 2.5t, lifting height: 3220mm, length: 2262mm, width: 1199mm, height: 2230mm, weight: 4.4t, an on-site inspection is possible.

Load: 7.7t, max. stroke: 3200mm, weight: 5.8t.

There are two identical electric forklifts available, connected load: 7.6kW, weight: 8.17t, operating hours of machine 1: 24,063h, on-site inspection is possible.

Wire diameter: 1 mm Number of bending slides: 1   CNC Brand: _Unknown / Other Integrated C-Axis 0-40 Rpm Min. distance table to quill : 215 Max. distance table to quill: 615 With seperate coolant tank X-Axis:                 700mm Y-Axis:                 500mm Z-Axis:                 400mm Table size L x W / or ø:870 x 550mm Table load:             50 Feed rate X-Axis:       1500mm/min. Feed rate Y-Axis:       1500mm/min. Feed rate Z-Axis:       1500mm/min. Length:                 3000mm Width:                  3000mm Height:         ...

Linde forklift, electric powered, 4 forks, fork length: 1200 mm, total dimensions: 3900 mm x 1200 mm x 2300 mm. With battery charger, serial number: 0387612-0010-001, year of construction: 2012.03.

Vemag mobile forming machine, model: FM250, number: 2500621, year of construction: 2016, 220-240/400-460/575 V, 3 Ph, 50/60 Hz, 4 A, 2.5 kW, 340 kg, plastic belt, belt width: 250 mm, total dimensions: 2000 mm x 820 mm x 1600 mm.

CFS Bakel B.V. forming machine, type: MLF 600, machine number: 800, year of construction: 2004, 400 V, 3 Ph, 50 Hz, 48 A, 23 kW, weight: 1782 kg, dye: (6x) 235 mm x 35 mm, total dimensions: 2400 mm x 1200 mm x 2600 mm. Incomplete.

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

fork head new, galvanized 6,80€ piece Forkhead new, galvanized 6,80€/ piece Support leg / tripod / tripod newly galvanized. 24,00€/ piece all prices excl. VAT and transport Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Inv. Num. : 6283 Type: Producer: Generated: 2000 Parameters: The line consists of: 2x shape lines (force shaper. 2x unwinding reel and automatic scissors at the end) 1x edge banding machine (corner shelf) automatic calculator for finished corners)

Product number: 2643B Type: MultiFormer400 Serial number: 2489 Year of construction: 2013 Belt width: 400 mm Capacity: max 55 strokes/min. Hopper: 270 litres Power: 3 x 400V, 50Hz, 9kW Dimensions: 3350 x 1100 x 2650 mm Weight: 1200 kg WIth bridgebreaker Including trolley for forming plates and parts

Product number: 2644J Type: VM400HD Belt width: 400 mm Capacity: max 50 strokes/min. Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2150 x 800 x 2250 mm Weight: 820 kg

Tine adjuster with side adjustment type: 3.5 T 466 B from Kaup

: gebraucht : 9697 : prompt, Zwischenverkauf v : USA : 2800 € : 1 : 0.8 - 1.25 mm : 2.2 kW : 1500 mm : 620 mm : 1150 mm : 284 kg 1 set of rollers for Pittsburgh fold 1 set of rollers for long fold Mounted on wheels no User manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overall size: 3950 x 3700 x 300 mm Door size: 3600 x 3500 mm

MEATBALLS FORMER STORK TITAN B.V, MODEL: TVM 004 Technical description: Number of heads: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1500 x 2300 x 2680 mm Load lifter: Optional

MEATBALLS FORMER 1 HEAD, MENZING TITAN TYPE: VM 005 Technical description: Serial number: 641490 Number of heads: 1 Diaphragm diameter: ?70 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 1450 x 2170 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

Capacity: 100 t Stroke of each cylinder: 200 mm Width material maximum: 10 mm Distance grippers maximum: 710 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:710mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:         ...

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

We offer a new, universal element slab formwork system EVODECK 300m², directly from the factory at great conditions, special net price € 87,368.00 Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 150 Element EVODECK 150x120 cm with PP formwork plate 10 element EVODECK 150x75 cm with PP formwork board 10 element EVODECK 120x75 cm with PP formwork board 90 Drop head EVODECK 135 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 9 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and di ...

Seewer Rondo SSO62 pastry brake Stainless frame, belt dimensions 3200mm x 640mm, top mounted flour duster, mobile, 3Ph

IMPACT ENERGY, KJ 50 NOMINAL WEIGHT OF FALLING PARTS, KG 2000 MAX NUMBER OF BLOWS PER MINUTE 56 WORKING ZONE DAYLIGHT, MM 530 DISTANCE BETWEEN COLUMNS, MM 2360 DIE IMPRESSION SIZE, MM 530 x 300 STEAM PRESSURE, MPA 0,7-0,9 HAMMER DIMENSIONS, MM 4900 x 1930 HAMMER HEIGHT ABOVE FLOOR LEVEL, MM5000 HAMMER WEIGHT WITH ANVIL BLOCK, KG 50100 ANVIL BLOCK WEIGHT, KG 30000

Weight of impact (Nominal weight of falling parts) kg 3150 Energy of impact kj 80 The greatest number of impacts it is brisk in a minute 56 Distance between racks in light mm 2800 Height working area mm 630 The sizes of a mirror it is brisk 600 x 340 Distance from a mirror bottom it is brisk up to a level of a floor mm 750 Pressure of air before an intake 6-8 Machine overall dimensions: mm ·length 5000 ·width 2500 ·height 4500 Weight of an anvil-block kg 41 250 Weight of a hammer with an anvil-block kg 70 700

Offer 04446 Specifications: - Total width approx. 950 mm - Working surface length / web length approx. 420 mm - Working surface depth / web depth approx. 150 mm - Compression foot approx. W 120 x D 125 x H 140 mm - Total depth approx. 280 mm - Round horn approx. 250 mm - Square horn approx. 260 mm - Round hole in the track approx. 22 mm - Through-square hole in the track approx. 25 mm - Anvil height approx. 345 mm - Weight approx. 190 kg - Base frame W 520 x D 520 x H 345 mm - Weight 30 kg

Product number: 2704EG Type: PFM-12 Serial number: 171 Capacity: 20 - 65 strokes/min. Forming width: 12", 30.54 cm Hopper: 500 Lbs. / 226 kg Belt width: 380 mm Compressed air: 7 Bar, 140 l/min. Power: 3 x 460V, 60Hz, 17kW Dimensions: 2950 x 1100 x 2050 mm Weight: 1950 kg With Tender-Form and paperfeed interleaver. Including various parts and moulds.

Gebr. Stair formwork / delta formwork ramp, make HOWAL, for straight stairs - mechanically adjustable, stairs can be made in installation position up to approx. 2.26 m wide and 18 gradients, max. platform length: 2.00 m