injection moulding for used for sale

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Technical data: Make: Moehringer Length: 1900 mm Width: 60 mm - Good condition - Used to transport parquet friezes - Tipping stool and adjustable stem holder Pictures and further information on request

technical data: Funding length: 2 m Axle distance: 1.8 m Bandwidth: 1500 mm

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min

Ladies and gentlemen, Offer Textile conveyor belt approx. 180 tons With a friendly greeting Trade & Translations

Basic-outdated Fortuna Gr.4 machine was anew varnished completely dismantled and wearing parts were renewed. 6-month guarantee taking back old machine possibly.

4 Cyl. Ford industrial engine, alternator, tractor Ford 5000, pass.f. New Holland Mähdr. 8030

CONVEYOR BELT CONVEYOR BELT, FEED DIRECT FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -Stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with textile plies, coated on one side, underside of fabric! -New, endless welded, 2-ply reinforced, with Central wedge guide rail on the underside, grooved profile 8 mm x 12 mm wide! -Dimensions: 7480 mm x 300 mm width x thickness mm 2 with 26 piece PVC T studs 30 mm high x 240 mm long (edge distance 30 mm each), obliquely set, -Band will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Not is your de ...

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Formcook combi grill Belt width: 1100 mm Grill length: 11.000 mm Heating: thermic oil Cooking time: 3-50 min. Maximum temperature of 250 degrees Celsius Power: 25 kW Dimension: 12.825 x 1740 x 2323 mm Weight: 10.000 kg

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

Pillow-pack machine Max 80 packages per minute thermally sealed

Formaco meat former press Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press

MADE directly from the manufacturer of PREMIUM quality large stock for all manufacturers! Conveyor belt / conveyor / new merchandise directly from the manufacturer, MaÃ?anfertigungSpeziell new for Growi - round bale Uncoiler stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with 3 tissue deposits. - endless with 3-fold different finger-joint dimensions: length 3,000 mm x width 1,200 mmFür Kverneland (3,250 mm x 250 mm), or other manufacturer on request on request, we can the conveyors / conveyor belts on Cut out their individual dimensions. (All lengths and widths possible) We ship worldwide we deliver worldwide, please ask for shipping costs! Not is your desired size? No problem! We customize for you! BELTech GmbH in Lüdenscheid

MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Hydraulic

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Form-on smartPROP 20 sF2 - 2,00 - 3,50m, new a 33,95€ net -low weight -long service life -safe working Your benefits: Effortless and fast work due to the low dead weight Preservation of the value of the support over many years thanks to high-quality production and galvanizing Safe working thanks to crushing and Failover Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim e-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO: DE279047055

CONVEYOR BELT / CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! For many applications in industry, agriculture and for woodchips. On request we manufacture the conveyors / conveyor belts to your individual measurements. (All lengths, widths and designs possible) Available also with pimples, studs or textured surfaces. We ship worldwide we deliver worldwide, please ask for shipping costs!

FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green

Formwork/Beam H20 Form-on smartBEAM 20 P new from 6,50 EUR/lm Form-on smartBEAMS 20P new, bridge made of phenolic resin glued hardboard, available in all lengths: Subject to sale Your benefits: - reliably high load-bearing capacity over the entire length of the beam due to the homogeneous web material - Secured component load-bearing capacity through mechanical strength grading and load test for 100% of the belts - consistent product properties thanks to high dimensional stability - multiple savings compared to squared timber due to higher load-bearing capacity with lower weight Carrier produced according to DIN EN and with German technical approval. The images listed are sample images All prices excl. VAT and transport Subject to sale For questions Mr. Becker under 0176700 44689 Purchase and sale of scaffolding/formwork systems and construction ma ...

Sale front forklift Kalmar with fork adjustment and side shift, Transport high 3,83 m , length with forks 5800mm , width 2550mm, weight 19200kg, approx. 22 000 hrs Very good condition ! Immediately available!

Roll press / dough dividing and warp knitting machine / Klievmaschine Machine Mechanics completely overhauled & repainted by the expert New installation of the entire electrical system, according to the latest standards 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + Cleaning position electric, to the rear, with switch + even division of the dough, excellent rounding of the dough pieces + equipped with active cut-off, for square dough pieces + Partial knife / cutter head has been overhauled / recoated + completely disassembled, mechanically overhauled, repainted + New installation of the entire electrical system, according to the latest standards + Transmission parts run constantly in an oil bath + complete overhaul in Babenhausen, according to German quality stand ...

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

Sahnezapfer, Fortuna, Type Record

HYSTER 5.5 FORTENS forklift built in 2009 is dedicated for fast and safe transportation of loads with a maximum weight of 5500 kg. Thanks to its reliable design characterised by maximum stability and excellent visibility in all directions, the forklift is ideal for even the most demanding challenges inside and outside warehouses. The vehicle’s LPG ignition engine features super-fast glow plugs to ensure fast and reliable engine starting in all conditions. The HYSTER H5.5FT gas forklift weighs 8160 kg Technical specifications of the LPG forklift truck HYSTER 5.5 FORTENS - maximum lifting capacity: 5500 kg - maximum lifting height: 4445 mm - weight centre (5000 kg load): 600 mm - weight centre (4650 kg load): 700 mm - weight centre (3800 kg load): 1000 mm - mast type: triplex - hydraulic accumulator: HYDRA SMOOTH - drive type: gas - vehicle weight: 8160 kg

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor curve 90° Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 2100 mm Total width inside: approx. 1130 mm Conveying width incl. motor: approx. 700 mm Conveying width without motor: approx. 600 mm Roller spacing/ axle spacing: approx. 80/130 mm Steel frame Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (0.37 KW) Includes side guide Feet to be ordered separately In stock: 4 pieces Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tai ...

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: up to 300 meters Total width incl. motor: approx. 540 mm Conveyor width: approx. 450 mm Roll diameter: approx. 50 mm Roller spacing/ axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 300 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your c ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 57 metres Total width incl. motor: approx. 790 mm Conveyor width: approx. 710 mm Roll diameter: approx. 65 mm Axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 57 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partn ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 57 metres Total width incl. motor: approx. 790 mm Conveyor width: approx. 710 mm Roll diameter: approx. 65 mm Axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 57 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partn ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 90 metres Total width incl. motor: approx. 690 mm Conveyor width: approx. 610 mm Roll diameter: approx. 50 mm Roller spacing: approx. 65 mm Axle spacing: approx. 125 mm Colour: Light grey Frame height: approx. 120 mm Frame width: approx. 35 mm Drive Type: SEW Motor Flat Belt Stock: approx. 90 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics W ...

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

continuous grilling line all stainless steel bottom contact grilling + hot air steam injection belt width 1.000 mm nett length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Belt Conveyor/ Webbing/ Conveyor Belt Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Webbing Condition: Used Total length: approx. 1000 mm Total width incl. model: approx. 950 mm Total width without motor: approx. 790 mm Conveying width/ belt width: approx. 700 mm Frame height: approx. 80 mm SEW motor included Including side guide The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would b ...

Foerder band rolls, rollers for foerder tape or roller conveyor Ball bearings for heavy loads. GST roll 133.0mm/20mm pipe length 1.150mm GUP 88.9/20mm/750/756/782/SW14/13 Roller load 750 Clamping 756mm Diameter approx. 89 to 133mm, various lashings, partly coated with rubber. Steel carrying roller / Foerderband rollers / Roller conveyor rollers According to photos; Unused Special price

Technical Description:Base Jaws

-Air conditioning from BS-40 -Exhaust fan to the correction of the fermenting Cabinet climate -Turret cutting head with pneumatic connection and Capacity for maximum 4 tools -Kaiserstüpfler with pneumatically driven, adjustable flour Shaker -Hanger drying -Ablegevorrichtung for Gärgutträter of the 3 euro sizes 400 Ã? 600 mm, 580 Ã? 780 mm, 580 Ã? 980 mm, maximum stripping length 1,000 mm -Insertion opportunity for proofing trays (standard links) -Fermentation freight carrier recording as a slot loading -Bypass belt pneumatic single - and extendible -Disinfection station -Screen control via touch screen -Operating side in direction of travel links

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rose Forgrove (APV) Type: RF 555 Flowpak YOM: 1988 output: up to 200 pieces/min. electrical: 380 V; 3 ph; 50 Hz dimensions: 4000 x 1250 x 1700 (lxwxh) Format range: length 50 - 275mm width max. 175 mm high max. 50mm discharge length: 315 mm Roll width: 450 mm Max. Rollen - ?: 330 mm (Außen), 76 mm (Innen) different: Infeed ca. 2000mm We offer this machine in as-is where-is condition excluded Vat, ex Warehouse Hess. Lichtenau, unpacked

Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 900 mm -Weight approx. 420 kg -with:-coolant system -Keyless drill Chuck 1-13 - lighting

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices