138,294 used machines on RESALE, but how to find them? Machine Search
Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine.
Key data: 120 kN
Mohrtek injection press, vertical loadable, horizontal pressing machine. please contact for more information
Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.
clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the ...
Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible.
Key data: 1500 kN, 359 g/PS, 50 mm
Year of construction 2011 + 2012 Clamping force: 150 tons. Screw diameter 50 mm Injection weight PS: 359 g Injection pressure: 2000 bar tie bar distance: 520 x 520 mm Machines are in good condition, and still in production
This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.
2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023
Key data: 220 kN, 27 g/PS, 22 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp
Injection moulding machine Battenfeld BK T 2500 BJ 1991
Key data: 220 kN, 27 g/PS, 22 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp
Manufacturer: Arburg Year of manufacture: 2008 Model: ALLROUNDER 370 S 600-290 Type of machine: Wax spraying machine Condition: already dismantled, ready for collection Find more here - .ucymachines/ Contact us at - sales@ucymachines
Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.
Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible.
A large-format injection molding machine Krauss Maffei is available. Clamping force: 6500kN, tie bar spacing X/Y: 1000mm/930mm, platen dimensions X/Y: 1530mm/1450mm, max. opening stroke: 900mm, mold height range: 350mm-650mm, max. platen spacing: 1550mm, ejector stroke: 250mm, ejector force: 110kN. Machine dimensions X/Y/Z: approx. 10000mm/2800mm/2450mm, weight: approx. 46000kg. Including a Wittmann handling unit. Documentation available. An on-site inspection is possible.
Key data: 1400 kN, 139 g/PS, 35 mm
1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt
This HAITIAN ZE2300 was manufactured in 2019. It features a clamping force of 2300 kN, a platen opening stroke of 1150 mm, and a screw diameter of 55 mm. Equipped with a robot and Euromap 67 interface, it remains in excellent condition and is still in production. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN ZE2300 machine we have for sale. Contact us for more information.
Key data: 1000 mm, 184 , 40
Screw diameter: 40 mm Displacement: 201 cm³ Injection weight in polystyrene: 184 g/hp Injection pressure: 2,000 bar Clamping force: 100 t 470 x 470 mm Tool installation height min.: 350 mm Opening distance: 350 mm CONTROL: Selogica Screen text: german / german Instruction manual: german / german Multilift H Core pulls: 2x Pump drive power: 22 kW Total connected load: 36.0 kW Total weight: 5,400 kg Machine dimensions L x W x H: 4.5 x 1.6 x 2.1 m m m Payment terms: 100 % before taking over the machine, net only
Key data: 1000 mm, 184 , 40
Screw diameter: 40 mm Displacement: 201 cm³ Injection weight in polystyrene: 184 g/hp Injection pressure: 2,000 bar Clamping force: 100 t 470 x 470 mm Tool installation height min.: 350 mm Opening distance: 350 mm CONTROL: Selogica Screen text: german / german Instruction manual: german / german Multilift H Core pulls: 2x Pump drive power: 22 kW Total connected load: 36.0 kW Total weight: 5,400 kg Machine dimensions L x W x H: 4.5 x 1.6 x 2.1 m m m Payment terms: 100 % before taking over the machine, net only
Key data: 250 mm, 21 , 18
Screw diameter: 18 or 25 mm Stroke volume: 23 / 44 cm³ Injection weight in polystyrene: 21 / 40 g/hp Injection pressure: 2,500 / 1,550 bar Clamping force: 25 t 270 x 270 mm Tool installation height min.: 200 mm Opening distance: 300 mm CONTROL: Selogica Screen text: german / english Instruction manual: german / german Euromap 67 Pump drive power: 7.5 kW Total weight: 2,500 kg Dimensions L x W x H: 3.0 x 1.3 x 1.9 m Payment terms: 100 % before taking over the machine, net only
Desma Vertical Injection Moulding Machines Model Type D968 250 ZO ( S3 ) Stroke Volume 2000 cm3 Injection Pressure 1670 bar Platen 560 mm x 630 mm Extended Daylight 860 mm Top and Bottom Hydraulic ejectors 400 mm stroke Strip Intake Control With Vacuum Pump Years: 2014 / 2015
Key data: 500 kN
Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg
This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details.
used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.
clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 550 x 430 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 35 mm - Screw length L/D: 17.3D - Dosing stroke: 140 mm - Screw speed: 20 – 480 rpm - Moulding volume: 135 cm³ - Injection pressure: 1,065 bar - Increased injection pressure: 1,620 bar - Heating power: 6.8 kW - Number of heating zones (including nozzle): 4 Clamping unit: - Maximum clamping force: 450 kN - Platen dimensions: 550 x 330 mm - Extended clamping plates: 550 x 430 mm - Minimum mould installation height: 180 mm - Maximum plate spacing: 530 mm - Opening stroke: 350 mm - Control system: EC 100 Drive: - Pump drive power: 11 kW - Approx. weight: 3,300 kg - Dimensions: 3,300 x 1,200 x 1,800 mm Current oper ...
clamping force: 4.000 kN injection volume: 2480 cm³ screw diameter: 90 mm platen size: 1.300 x 1.080 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 90 mm - Injection volume: 2,480 cm³ - Maximum shot weight: 2,232 g - Injection pressure: 1,360 bar - Increased injection pressure: 1,600 bar - Heating capacity: 64 kW Clamping unit: - Max. clamping force: 4,000 kN - Clamping plates: 1,300 x 740 mm - Extended clamping plates: 1,300 x 1,080 mm - Minimum mould installation height: 350 mm - Maximum platen spacing: 1,300 mm - Opening stroke: 950 mm - Core pull unit: 2-stage on BAP - Control system: EC 100 Drive: - Pump drive power: 55 kW - Weight (clamping side) approx.: 25,000 kg - Weight on injection side (approx.): 8,000 kg Discharge ...
Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2010. This Krauss Maffei CX 80-180 features a clamping force of 80 T and a screw diameter of 40 mm. It has a shot volume of 201 cm³ and a shot weight of 183 g. The machine includes a Euromap 67 robot interface and six heating zones. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei CX 80-180 machine we have for sale. Contact us for further details.
A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible.
Key data: 4200 kN, 527 g/PS, 70 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: KRAUSS MAFFEI Type: KM420-1900C2 Year of Make: 2006 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 70 mm Max. displacement: 1,047 cm³ Moulded part weight: 853 g/hp Control: MC5 Equipment: 2 pcs core train Robot SEPRO, type: SR4030 S3 VISUAL 12-way hot zone channel control Interface temperature control unit
Engel 3 ES 7050 / 1 500 Duo built in 1999 against bid.
Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible.
Hydraulic injection moulding machine manufactured in 2023. This TEDERIC NEO.E55/e110h features a 12 color TFT touchscreen control unit and a stainless steel material hopper. It includes a 3-stage central ejector and a pneumatic core pull control. With a screw diameter of 25 mm and a bimetallic barrel, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the TEDERIC NEO.E55/e110h machine we have for sale. Contact us for further details.
clamping force: 300 kN injection volume: 180 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine for rubber - second-hand Clamping unit: - Clamping unit: vertical - Clamping force: 300 kN - Platen size: 300 x 300 mm Injection unit: - Maximum injection volume: 180 cm³ - Mains supply: 3x 400 V, 50 Hz - Power rating: 11 kW - Control system: MAPLAN The machine is still in production and can be viewed in operation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.
A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating h ...
clamping force: 4.500 kN injection volume: 5.000 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 10000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 5,000 cm³ - Injection pressure: 2060 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 38 kW - Installed heating capacity: 67.5 kW - Weight: Clamping unit approx.: 8,900 kg Injection unit approx.: 3,200 kg Hydraulic unit with oil and control cabinet 2,350 kg - For dimensions, see the installation data in the appendix There are 6 machines available, manufactured between 2001 and 2004. The data ...
clamping force: 2.700 kN injection volume: 6.000 cm³ screw diameter: -- mm platen size: 560 x 630 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 2.700 kN - Platen size: 560 x 630 mm - Max. stroke: 550 mm (see data sheet) Injection unit: - Max. injection volume: 6,000 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 28,2 kW - Installed heating capacity: 49,9 kW - Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 1,860 kg Total weight approx.: 10.600 kg - For dime ...
clamping force: 4.500 kN injection volume: 3.300 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 3,300 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N - Motor power: 35,5 kW - Installed heating capacity: 73,9 kW - Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg Total weight approx.: 16.300 kg - For dimensions, see the installation data in the appe ...
clamping force: 4.500 kN injection volume: 5.600 cm³ screw diameter: 610 - 985 mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 610 - 985 mm (see data sheet) Injection unit: - Injection unit type: ADV - Max. injection volume: 5,600 cm³ - Injection pressure: 2200 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Pump capacity: 27 kW - Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.: 21,000 kg - For dimensions, see the installation data in the appendix The data for this ad w ...
Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings
Key data: 1250 , 174 , 43
SANDRETTO serie 9 T 430/125 Clamping force : 125 T / 1250 KN Distance between tie bar : 475 x 475 mm Platen dimensions : 600 x 600 mm Mould thickness min / max : 150 - 480 mm Opening strocke : 470 mm Screw diameter : 43 mm Injectable volume : 274 cm3 Pressure on material : 1566 bars Weight : 6200kg
clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...
clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 + ...
Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible.
NETSTAL SYN 1500-460 ist eine Plastikspritzmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schliesskraft: 150 to; Hubvolumen: 201 cm3; Schneckendurchmesser: 40 mm; Auswerferhub: 150 mm; Auswerferkraft: 49 kN; Einspritzdruck: 2218 bar. Technische Daten: von 20 t/min bis 300 t/min; Formenheizung 20 kW; Schneckengetriebemotor 30 kW; Maschinengewicht ca. 9000 kg; Maße L×B×H 5700×1650×2220 mm. Erreicht enge Toleranzen; geeignet für Automotive, Medizintechnik, Luftfahrt und Elektronik Technische Daten ohne Gewähr
Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008
Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009
maximum number of results exceeded
please refine your search
