injection molding machine used for sale

SANDRETTO series 8 790-200 SEF100 Clamping force: 200 T Distance between columns: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Tray dimensions 770 x 770 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000 kg Dimensions: 7.26 x 2.30 x 1.58 m

SANDRETTO series 8 790-200 SEF 90 Clamping force: 200 T Distance between tie rods: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000kg Dimensions: 7.26 x 2.30 x 1.58 m Euromap 12 robot interface (CHAVERIAT A.111.24.PM - CH 2002 from 07/1998 as an option possible)

SANDRETTO serie 8 612/150 with SEF 90 Clamping force : 150 T Distance between tie bar : 460 x 460 mm Mould thickness min / max : 155 - 560 mm Opening strocke : 500 mm Injectable volume : 392 cm3 Pressure on material : 1560 bars Screw diameter : 50 mm Weight : 7000 kg Dimensions : 6,36 x 2,08 x 1,50 m

SANDRETTO series 8 1334/330 Clamping force: 330 T - 3300 KN Distance between tie rods: 650 x 650 mm Tray dimension: 980 x 980 mm Min / max mold thickness: 200 - 730 mm Opening stroke: 550 mm Injectable volume: 863 cm3 Material pressure: 1550 bars Screw diameter: 65 mm Heating power: 37 KW Total machine power: 57 KW L/D ratio: 21 Weight: 15,700 kg Dimensions: 7.85 x 2.36 x 1.85 m Euromap 12 robot interface aus core top dosage

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 14350 kg
 Dimensions : 7,54 x 2,31 x 1,91 m

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie rods: 510 X 510 mm Tray dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Material pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage Weight: 8100 kg Dimensions: 6.13 x 2.08 x 1.59 m

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thickness min / max : 210 - 730 mm
 Opening strocke : 630 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 11 000 kg
 Dimensions : 7,04 x 2,22 x 1,82 m

SANDRETTO serie 9 1780/3950 Clamping force : 395 T - 3950 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 960 cm3
 Pressure on material : 1852 bars
 Screw diameter : 63 mm Total power of the machine : 66,8 KW Rapport L/D : 20
 Weight : 15 000 kg
 Dimensions : 7,80 x 2,31 x 1,93 m Additional option on this machine : Sequential injection

Inv. Num. : 7360 Type: CLH 630 1/8 Producer: Vihorlat Snina Created: 1985 Parameters: Compressive force: 630 t

Inv. Num. : 7359 Type: TL-4-250 Producer: RTS Rakovník Created: 1997 Parameters: The machine is in good condition.

Key data: 400 kN, 17 g/PS, 18 mm

Arburg 270S-400-70 (220) General information SKU: (220) Availability: In stock CTFZQ29N Year of construction: 2008 Brand: Arburg Specifications Injection weight: 17 g Clamping force: 400 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 385 x 385 mm Tool installation height min.: 225 mm Control: Selogica Language: English,Swedish Power: 16.4 kW Weight: 2040 kg Dimensions: 1.3 x 3.1 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Used injection moulding machine made by Arburg model Allrounder 221-75-350, new 1984. Closing force: 350 kN/tonne. Injection force: 77 kN/tonne. Operating voltage: 380V, 50Hz. Heating: 3.4 kW. Pump motor: 7.5 kW. Total load: 10.9 kW.

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

Key data: 1000 kN, 198 g/PS, 40 mm

Angel E-max 440-100 (216) General information Item number: (216 MB) Availability: In stock Year of construction: 2009 Brand: Angel Specifications Spray weight: 198 g Clamping force: 1,000 kN Stand: Used Screw diameter: 40 mm Spray pressure: 2000 bar Tie bar spacing: 410 x 460 mm Clamping plate size: 650 x 600 mm Tool installation height min.: 150 mm Control: LC 200 Language: English,Swedish Power: 18 kW Operating hours: 36000 h Weight: 4400 kg Dimensions: 4.7 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Key data: 500 kN, 50 g/PS, 25 mm

Angel E-Max 200-50 (215) General information SKU: (215) Availability: In stock Year of construction: 2008 Brand: Angel Specifications Spray weight: 50 g Clamping force: 500 kN Stand: Used Screw diameter: 25 mm Injection pressure: 2400 bar Tie bar spacing: 320 x 370 mm Clamping plate size: 520 x 470 mm Tool installation height min.: 150 mm Control: LC 200 Language: English/ Swedish Power: 14 kW Hours: 37500 h Weight: 3400 kg Dimensions: 3.8 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Inv. Num. : 7180 Type: ALLROUNDER 320 C 600 Producer: Arburg Created: 2008 Parameters: Distance between tie rods: 320x320 mm Clamping force: 500 kN Injection weight: 2300 kg

B&A REF: 9009 TON: 220 SHOT WEIGHT: 575G SCREW DIAMETER: 55MM STROKE VOLUME: 529CM3 INJECTION PRESSURE: 1550BAR PLATEN SIZES: 860 X 860MM DBTB: 585 X 585MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 580MM MAX DAYLIGHT: 1210MM EJECTOR STROKE: 230MM CONTROLS: SEF 2000 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

B&A REF: 9008 TON: 800 SHOT WEIGHT: 3687G SCREW DIAMETER: 100MM STROKE VOLUME: 3927CM3 INJECTION PRESSURE: 1470BAR PLATEN SIZES: 1470 X 1470MM DBTB: 1010 X 1010MM MIN MOULD HEIGHT: 380MM MAX MOULD HEIGHT: 975MM MOULD OPENING STROKE: 1025MM MAX DAYLIGHT: 2000MM EJECTOR STROKE: 300MM CONTROLS: KEBA AIR VALVES: 2 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Screw diameter; 95 mm Injectable volume: 3360cm3 Injection pressure: 1895 bar Column width: 1000 x 900 mm Minimum mould thickness: 40 mm max: 950 mm Aperture stroke: 930 mm Cores: 4 Robot Interface: Yes Options: Retractable Column - Electric Dosing Motor 24 Zones Mold Heater Magnetic trays 8-point sequential injection Blow guns: 2 3-axis robot

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012

Screw diameter: 55 mm Injectable volume: 515 cm3 Injectable weight: 460 g Injection pressure: 2400 g Column width: 1020 x 920 mm Aperture stroke: 900 mm Mould thickness: min: 600 mm - max: 1050

Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Screw diameter: 60 mm Injectable volume: Injection Pressure: Passage between columns: 735 x 735 Mould thickness: min: 330mm- max: 680 Opening stroke: 660 mm Number Of Cores :2 Robot interface: E67

Clamping force 150 ton

Key data: 5800 , 2860 , 90

Screw diameter: 90 mm Injectable volume: 2860 cm Injectable weight: 2700 g Column width: 960 x 830 mm Opening stroke: 1000 mm Mould thickness: min: 300 mm -max: 900mm 2 hydraulic cores

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

Description: Machine number: 44314 Operating voltage: 400 V Frequency: 50 Hz Rated current: 50 A Closing force: 50 to Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 2,000 mm, weight approx.: 3,000 kg

Description: Machine number: 175808 Operating voltage: 400 V Frequency: 50 Hz Heating connection: 14.9 kW Pump motor: 30 kW Total connection: 44.9 kW Clamping force: 1600 kN Screw diameter: 50 Platen dimensions: 780 x 700 mm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 2,100 mm, weight approx.: 6,600 kg

Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg

B&A REF: 9024 TON: 160 SHOT WEIGHT: 343 SCREW DIAMETER: 50MM STROKE VOLUME: 3477CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR CIRCUIT: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE

B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES

B&A REF: 9006 TON: 500 SHOT WEIGHT: 993 SCREW DIAMETER: 70MM STROKE VOLUME: 70CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 1280 X 1280MM DBTB:920 X 920 MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1850MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: EUROMAP HEATING CAPACITY: 37KW ROBOT INTERFACE: EUROMAP ACCUMULATED: 2

Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg

ENGEL 2k 200 ton year 2009 x 2 units. Used for handles of toothbrush

Key data: 200000 kN, 72 g/PS, 30 mm

Clamping force: 200 t Year of construction: 2006 Injection weight in PS: 72 / 45 g Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spec. Spray pressure: 2000 / 2500 bar Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Size of clamping plates: 795 x 795 mm Lights spar spacing: 570 x 570 mm Tool installation height: 300 mm Aperture travel: 650 mm Max. plate spacing: 950 mm Ejector travel: 225 mm General information: Delivery Time: Natychmiast Dimensions(m) LxWxH: 5.50 x 2.08 x 2.45 m Equipment: 3 x Hydraulic Core Pull 4 x Air Valve 2 x Thermoregulators Snail: upper/vertical 30 mm Bottom/Horizontal 25mm

Key data: 100000 kN, 149 g/PS, 35 mm

Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve

Key data: 160 kN, 291 g/PS, 45 mm

Clamping force: 160 t Year of construction: 2006 Injection weight in PS: 291 g Control type: Selogica Injection unit: .../800 Screw diameter: 45 mm Spec. Spray pressure: 2470 bar Spray volume: 317 ccm Injection weight in PS: 291 g Clamping unit: 160/... Clamping force:: 160 t Lights spar spacing: 520 mm Aperture travel: 175 mm Max. plate spacing: 900 mm General information: Weight: 7000 kg Dimensions(m) LxWxH: 5.5 x 1.8 x 2.1 m Other equipment: 2 x Core Pulls

Key data: 200000 kN, 117 g/PS, 35 mm

Clamping force: 200 t Year of construction: 2001 Injection weight in PS: 117 g Control type: Selogica Injection unit: .../350 Screw diameter: 35/35 mm Spec. Spraying pressure: 2500/2500 bar Spraying volume: 127 ccm Injection weight in PS: 117 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 mm Aperture travel: 175 mm Max. plate spacing: 950 mm Ejector travel: 225 mm Other equipment: 2 x Core Pulls

Key data: 1000 kN, 6947 g/PS, 120 mm

Clamping force: 1000 t Year of construction: 2005 Injection weight in PS: 6947 g Control Type: Unilog B4 Injection unit: .../19000 Screw diameter: 120 mm Spraying volume: 7634 ccm Injection weight in PS: 6947 g Clamping unit: 10000/... Clamping force:: 1000 t Lights spar spacing: 1350 x 1350 mm Aperture travel: 1300 mm Max. plate spacing: 2350 mm Equipment: 2 x Hydraulic Core Wittmann Manipulator Conveyor belt Centering hole 250mm

Key data: 250000 kN, 690 g/PS, 60 mm

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

Key data: 60000 kN, 18 g/PS, 15 mm

Clamping force: 60 t Year of construction: 2000 Injection weight in PS: 18 g Control type: Selogica Injection unit: .../150 Screw diameter: 15 mm Spec. Injection pressure: 2500 bar Spraying volume: 20 ccm Injection weight in PS: 18 g Clamping unit: 600/... Clamping force:: 60 t Size of clamping plates: 570 x 570 mm Lights spar spacing: 370 x 370 mm Tool installation height: 200 mm Aperture travel: 450 mm Max. plate spacing: 650 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 150 l Weight: 3600 kg Dimensions(m) LxWxH: 4.0 x 1.2 x 2.1 m

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

Key data: 130000 kN, 194 g/PS, 45 mm

Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m

Description: Injection unit: Screw diameter 75 mm, , Specific injection pressure 1990 bar, , stroke volume 1756 cm³, , maximum injection weight 1605 g, , Injection flow 373.5 g/sec, , Screw speed 160 rpm, , Closing unit: , closing force 4800 kN, , Locking force 5280 kN, , Opening time 730 mm, , maximum plate distance 1480 mm,  ,clear distance between tie bars 760 x 760 mm, , Ejector force 125 kN, , Ejector stroke 250 mm, , Total system drive power , Hydraulics 45 kW, , Total connected load 74.2 kW, , System pressure 140 bar, , Tank capacity 1250 l, , Machine is equipped with new hydraulic pump, , Without visible accessories Approx. Onsite Dimension. (l x w x h): 9,000 x 2,300 x 2,200 mm, weight approx.: 24,000 kg

Description: Closing unit: , closing force 1000 kN, ,random force 50 kN Opening stroke 500 mm Mold mounting height 250 mm Distance between the clamping platens 750 mm Light column spacing 420 x 420 mm Ejector force 40 kN, ejector stroke ,175 mm Injection unit: screw diameter 35 mm, effective screw length 20 l/d, screw stroke 150 mm Stroke volume 144 cm³ Injection part weight 132 g Injection pressure 1820 bar Approx. Onsite Dimension. (l x w x h): 4,600 x 1,600 x 2,000 mm, weight approx.: 3,200 kg