injection molding machine used for sale

Used Sipa Blow Molding Machine 1994 We have a used Sipa blow molding machine from 1994 that is currently in storage The machine is manufactured by Sipa and the model is Top 2000 The condition of the machine is not specified It comes with safety features that are available for use and there are manuals available to assist with operating and maintaining the machine The machine is designed to produce containers made from PET material and it can create containers in two formats 0 50 L and 1 0 L The machine has six cavities and features a preform loader It s not stated whether the machine comes with a preform tipper or unscrambler Additionally the machine comes equipped with a compressor and chiller The preform neck type is compatible with a press cup closer The machine has an air recovery system and is either a linear or rotary type The machine s measurements are as follows width of 8000 mm  ...

Used Blow Molding Machine SMI SR12 2007 This used blow molding machine manufactured by SMI in 2007 is a reliable and efficient machine designed for PET containers The model is SR12 and it is capable of producing containers with a format of 1 5 L With 12 cavities this machine has a high production capacity and can produce large quantities of containers in a relatively short amount of time One of the advantages of this machine is its preform loader preforms tipper and preforms unscrambler which help to streamline the production process and make it more efficient The preform loader automatically loads the preforms into the machine the preforms tipper tips the preforms into the mold and the preforms unscrambler helps to orient the preforms in the correct position for molding The preform neck type for this machine is PCO1810 which is a widely used neck finish for PET containers This blow mold ...

Used Blow Molding Machine Blomax 14 2004 For businesses looking to invest in a cost effective high speed blow molding machine we re pleased to offer a used KHS Blomax 14 model from 2004 This machine is specifically designed to produce PET containers and has a remarkable speed of 18000 BPH The standard mould hanger can cover bottlevolumes from 0 1 to 3 0 liters Special sizescan also be produced Equipped with 14 cavities and a range of features including a preform loader preform tipper and preform unscrambler this machine offers excellent value for money Additionally it has a PCO1881 preform neck type and air recovery system to improve efficiency This Blomax 14 is a rotary type machine and is currently in production making it an excellent option for businesses looking to expand their production capacity Although it doesn t come with a compressor or chiller it is still a reliable and effici ...

Sidel SBO 10 Used Blow Molding Machine 1994 The Sidel SBO 10 Used Blow Molding Machine 1994 is a high quality machine manufactured by Sidel This machine is designed to create containers made from PET material and comes in a format of 1 5 L The model number of this machine is SBO10 and it was produced in the year 1994 The Sidel SBO 10 has a speed of 10000 bottles per hour making it an ideal choice for businesses looking for a reliable and efficient production process This machine comes equipped with ten cavities allowing for the creation of multiple containers simultaneously It also includes a preform loader preforms tipper and preforms unscrambler which work together to ensure that the preforms are loaded and positioned correctly for the blow molding process The Sidel SBO 10 Used Blow Molding Machine 1994 does not come equipped with a compressor or chiller so these will need to be provid ...

Sipa Blow Molding Machine 2001 High Speed Production of PET Containers We have a Sipa Blow Molding Machine from 2001 available for purchase This machine is a SF 12 8 model that can produce up to 8000 bottles per hour The machine is specifically designed to produce PET containers in 1 0 L and 1 5 L formats Features and Specifications The Sipa Blow Molding Machine has 8 cavities and is equipped with a preform loader to ensure efficient operation The preforms unscrambler is also included making it easy to load the preforms into the machine However the machine does not come with a preform tipper The machine has a compressor and chiller to maintain the ideal temperature and pressure for blow molding PET containers The preform neck type is border and the machine does not come with an air recovery system The linear type of this machine makes it easy to integrate it into your production line Cur ...

Used Sipa Rotary Blow Molding Machine 2008 A Comprehensive Overview Are you in the market for a reliable blow molding machine Look no further than the used Sipa Rotary Blow Molding Machine 2008 In this article we will delve into the details of this machine exploring its features specifications and benefits Whether you are a seasoned professional or just starting in the industry this article will provide you with valuable insights into the Sipa SFR8 Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1 Introduction Blow molding machines play a crucial role in the production of various plastic containers The Sipa Rotary Blow Molding Machine 2008 also known as the SFR8 is a popular ...

Used blow moulding machine Sidel SBO 8 series 2 up to 12000 bph Introduction of the blow moulding machine Sidel SBO 8 In the bottling field the choice of suitable machinery is crucial The used Sidel SBO 8 blow molding machine series 2 stands out for its production capacity and reliability Designed in 2004 this 2 series represents a cost effective option for companies looking for efficiency and quality in the bottling sector Technical details The Sidel SBO 8 series 2 is a bottle blowing machine that has accumulated 19857 working hours This data reflects the experience and resistance of the machinery over the years It is important to note that the machine is sold without molds This offers considerable flexibility in terms of customization and adaptability to specific production needs Maintenance and Reliability of the blow moulding machine Sidel SBO 8 The last maintenance intervention was  ...

PET Blow molding machine SIDEL SBO 18 Manufacturer: SIDEL Model: SBO 18 Manufactured in: 2001 Capacity: 26.500 bph Working hours: approx. 44.000 hours The machine was uploaded with a new program in 2006 and its output upgraded to 26,500 bph. The machine includes preform tippers for 2 Octabins each. Preform vertical conveyor up to the entry into the machine.

Used Blow Molding Machine SMI EBS 10 year 2019 Introduction to the Blow Molding machine SMI EBS 10 Initially the industrial bottling sector demands unparalleled precision and operational efficiency Consequently the Used SMI EBS 10 Blow Molding Machine from 2019 perfectly embodies these crucial characteristics This machine ingeniously integrating advanced engineering is specifically designed for the manufacturing of PET containers showcasing its pivotal role in the industry Technological Capacity Produced by SMI the introduction of the EBS 10 ERGON model in 2019 stands as a testament to significant technological advancement Boasting an impressive production capacity of 17 000 BPH bottles per hour this capacity is essential for meeting high volume production demands Additionally it supports various container formats including 0 20 L 0 33 L and 0 6 L thereby significantly enhancing its util ...

Used Blow Molding Machine SMI SR10HP year 2015 Firstly the SMI SR10HP produced in 2015 emerges as an advanced solution for PET container production This analysis aims to detail its technical specifications and operational features It significantly highlights the machine s efficiency and productive capacity in industrial environments Productive Capacity and Versatility of the Blow Molding Machine SR10HP Importantly the machine achieves a remarkable speed of 17 000 BPH showcasing its high capacity It adeptly processes a variety of container sizes including 0 20 L 0 33 L and 0 6 L thereby offering considerable flexibility in production lines Configuration and Components Moreover it boasts ten cavities for simultaneous preform processing which optimizes production time Integrated systems such as a loader tipper and unscrambler automate preform handling Consequently these systems minimize man ...

Used Blow Molding Machine KRONES Contiform C312 PRO Year 2016 Introducing the Blow Molding Machine KRONES Contiform C312 The KRONES Contiform C312 PRO blow molding machine manufactured in 2016 represents the pinnacle in the bottling industry Crafted by the renowned German company Krones this model delivers reliable high quality performance to meet the most demanding sector requirements Performance and Capacity of the Machinery Featuring a 12 cavity mold the Blow Molding Machine KRONES Contiform C312 operates at a maximum speed of 27 000 bottles per hour bph This remarkable production speed ensures a steady efficient flow thereby optimizing processing times and maximizing productivity Versatility and Adaptability of the Blow Molding Machine KRONES Contiform C312 Moreover its ability to adapt to various product types including square and round shapes makes the Contiform C312 PRO highly ver ...

Used Blow Molding Machine KRONES Contiform S14 year 2014 Introduction Revolutionizing Bottling Operations In the realm of bottling technology the Used Blow Molding Machine KRONES Contiform S14 crafted in 2014 emerges as a paragon of efficiency and precision Developed by Krones this rotary type machine redefines the standards of production boasting unparalleled features and capabilities Engineering Excellence Unraveling the Components At the core of the Contiform S14 lies a meticulously engineered mold with 14 cavities designed to accommodate diverse production needs This configuration ensures optimal utilization of resources while maintaining high output rates Complementing this design is the machine s impressive operational speed reaching up to 28000 bottles per hour a testament to its efficiency in meeting demanding production schedules Power and Performance A Closer Look to the Blow M ...

Used Blow Molding Machine UROLA MSC6 HDPE Year 2019 Introduction The UROLA MSC6 HDPE blow molding machine manufactured in 2019 stands as a pinnacle in HDPE bottle production technology Equipped with six moulds this rotary blow molder sets a new standard in efficiency and performance Technical Specifications The UROLA MSC6 HDPE utilizes a rotary blowing unit featuring six cavities capable of achieving a maximum output of 1600 bottles per hour Furthermore the machine boasts a maximum mould opening of 240mm and a mould clamping force of 9 000 kg ensuring precision and stability in the production process Blower HDPE Crafted specifically for High Density Polyethylene HDPE bottle production the UROLA MSC6 HDPE guarantees superior quality and durability Its advanced design and engineering cater to the demanding requirements of the packaging industry making it an ideal choice for manufacturers s ...

Used blow molding Sidel SBO 12 Series 2 The Sidel SBO 12 Series 2 represents a culmination of this evolution boasting advanced features and capabilities Over time blow molding machines have become indispensable in modern manufacturing Reliable Performance and Durability of the Used blow molding Sidel SBO 12 Series 2 Moreover the blow molding machine stands out for its exceptional performance and durability With a modest operational lifespan of 45 000 hours it has proven to be a reliable workhorse in the production line Its robust construction and precise engineering ensure consistent quality and productivity making it a valuable asset for manufacturing operations Comprehensive Maintenance Support In addition maintenance and servicing are crucial aspects of ensuring the longevity and performance of blow molding machines Sidel a leading manufacturer in the industry offers comprehensive sup ...

Used Blow Molding Machine Sipa SFR 16 Assessment of Heating System and Preform Feeding Firstly a comprehensive evaluation of the entire oven system is imperative encompassing turning over ramps and tension wheel guides to ensure an efficient and seamless bottle forming process Evaluation of Transfer Arms and Cams of the Sipa blower An indispensable aspect pertains to the scrutiny of transfer arms and cams These components play a pivotal role in maintaining a continuous and uninterrupted production flow Furthermore meticulous inspection of their functionality is essential to uphold the quality and precision of the blow molding process Condition of Molds and Stretching Mechanism Equal emphasis is placed on assessing the condition of molds and the stretching mechanism The accuracy and integrity of the molds are pivotal in producing flawless high quality bottles Consequently conducting a tho ...

A unique opportunity without intermediaries for people who want to become self-employed in the field of plastic injection molding! As of 1.3.24, we are actively discontinuing our activities in owner-managed plastic injection molding. We have been active in this field for several decades, both for our own products made of thermoplastics (ABS / POM / PC / glass fiber reinforced PA ), as well as on a contract basis for renowned companies. For sale we offer our small plastic injection moulding shop (without real estate and fixed building installations) as a whole - with currently 2 fully hydraulic Aarburg injection moulding machines type Allrounder 320-210-750 and 320-210-850 as well as all peripheral devices - all from well-known brand manufacturers, such as 2 Thermolift Arburg 100-2, various conveyor belts, various temperature control units oil and water, chiller for the cooling circuit ...

The machine is almost brand new. It was produced in 2021 February and installed in 2021 July it includes : - AL-250-50S ISBM machine - Mitsubishi RV-3SB , 5 axes take out robot with complete cell / conveyor , controller and teaching pendant - Wittmann Dry MAX E60 PET dryer (2013) The machine has the following extra options: - EN (European Norm compatibility) specification (value: JPY2,500,000) All the other options: (value: JPY960,000) -Blow clamping short stroke - blow core short stroke - Lip cooling circuit - blow & bottom mold chiller cooling, The machine will be in production until 2023 January. It is possible to see in running.

Vertical injection press GBF Pump pressure 180 bar. Thermoregulated surface with nozzle outlet on the upper surface 200x200. Rear extraction. Gefran electronics. atos valves. Injection capacity 2350 cubic cm. Independent cooling

Description: With 8 drawers  , Contents , Pillar and guide sleeves for tools, , Thread plugs, , Ejector rods, Mounting material, , Twist drill Approx. Onsite Dimension. (l x w x h): 710 x 700 x 1,000 mm, weight approx.: 380 kg

Technical data: Motor power: 0,75 kW Voltage: 220 V / 50 Hz Machine width: 900 mm Machine height: 1150 mm Machine length: 750 mm Weight: 135 kg Year of construction: 1996; ready for use

Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity

A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available.

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Universal riener, double riening machine, brake coating riener e.g. for rivets of couplings or brake belhighs Adjustable distance Ideal for faithful restoration and maintenance of classic cars Rest according to photos Special price

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately

-Winding unit with right winding sense -Winding buckthorn holder for coils Inner diameter 2-5mm -Winding number 2-30 -Wire thickness 0.25-1mm -Gear translation AA + DD -Roller-drht richter -380V; 50Hz; -Documentation, spare parts plans Explusinszeichnungen and schematic available -Dimensions Space requirement 675 H430 735mm low Ehcubsv -Weight 65Kg

Cup filling and sealing machine 67/95mm YOM 2014. As new, Only been used for a week.

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250