injection machine used for sale

Krauss Maffei KM 2000-17200 MX Injection Molding Machine Krauss Maffei robot - LR 500 Year of production - 2007 Hydraulic-mechanical double-plate locking system with 4 pressure cushions and 4 locking units on the movable plate. PV - adjustment of the injection unit. MC 5 - PC - (Pentium) control system with TFT colour monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with HPS-AT screw diameter 150 mm TECHNICAL DATA Clamping unit - mould clamping force: kN 20000 - mould opening force: kN 1400 - Dimensions of the mounting plate (H x V): mm 2650 x 2400 - Clearance between columns (H x V): mm 1870 x 1620 - mould opening stroke: mm 2800 - mould height (min-max.): mm 800 – 1700 - Opening width: mm 3600 - ejector stroke: mm 400 - ejector force: kN 400/200 Injection Unit - screw diameter: mm 150 Cetb ...

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +2.Aggregat+ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumula ...

used injection moulding machine 2-colours 2-K (45° arrangement of the 2nd unit) from clean room production Manufacturer: Arburg Type: 570C 2000-350/150 Control Selogica year of construction: 2007 Extras / Special features - Robot interface - 4x core pull - Technology level 2 and 3 (3 control pumps) - screw and barrel highly wear resistant - open nozzle - position controlled screw - Accumulator system f. fast injection - hydraulic accumulator - injection pressure increased for 2nd unit - Extension of tie bars of min. mold installation height to 500 mm Opening stroke unchanged - cores freely programmable - blow-out device - Interface for temperature control units - Control extension f. special signals - Interface coloring ( unit 1 u. 2 ) - interface vacuum valve B797ctcwes - additional heating control circuits for nozzle and nozzle tip - 12 electrical he ...

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu

Battenfeld HM 500/5100 injection molding machine Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1470 x 1260 Clearance between columns (hxv) [mm] 900 x 720 Min./max. mold height [mm] min 450 Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 85 Injection volume [cm3] 2412 Injection weight [g] 2195 Injection pressure [bar] 2110 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 37.3 Dimensions and weight Net weight with control cabinet [t] 26 Dimensions (L x W x H) [m] 6.9 x 2.4 x 3 m Instrumentation: EUROMAP 67 robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving plate 8 x hot runner controls bimetal injection system ejection plate

Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the  ...

Description: Serial number: 42169, Own weight: 7,000 kg Injection unit: Screw diameter: 80 mm, metering stroke: 310 mm, max. stroke volume: 1,558 cm³, screw speed: 183 rpm, standard screw length: 20 L/D, plasticizing capacity: 90 g/s, injection flow: 478 cm³/s, specific injection pressure: 1,400 bar, specific injection pressure increased: 1. 640 bar, nozzle stroke: 650 mm, nozzle pressing force: 110 kN, heating power: 34 kW, number of heating zones including nozzle: 5, pump drive power: 55 kW, oil filling main tank: 1,000 l, oil filling suction tank: 850 l, weight of injection unit: 7 t Clamping unit: Clamping force 6,000 kN, opening force: 300 kN, moving cylinder force: 150 kN, opening stroke: 1,200 mm, mold installation height min. 800 mm, platen distance max. 2,000 mm, platen size HOR.X.WERT. 1,580 x 1,300 mm, ejector stroke: 250 mm, ejector force: 110 kN, weight of clamping unit: 4 ...

Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000

Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

Injection moulding machine Demag Ergotech 5000-5200 Parameters: Production year: 2001 Control: NC10 Injection unit: .../5200 Screw diameter: 95 mm Specific injection pressure: 1550 bar Injection volume: 2835 ccm Injection weight: 2550 g Tool closure system: 5000/... Clamping force: 500 t Tool plate dimensions: 1300 x 1200 mm Distance between columns: 900 x 800 mm Tool height: 400...880 mm Opening distance: 810 mm Maximum plate distance: 1690 mm Ejector stroke: 230 mm General data: Dimensions (m) LxWxH: 9,40 x 2,30 x 2,50 m Instrumentation: 6 x pneumatic cascade 2 x Hydraulic Core

Electric Injection Molding Machine ! Clamping unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection Unit Screw diameter [mm] 35 Injection volume [cm3]: 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions & Weight Net weight with control cabinet [t] 5,7 Dimensions (L x W x H) [m] 4.7 x 1.4 x 2.7

Closing unit Clamping force [kN] 10000 Dimensions of mounting plates (hxv) [mm] 2000 x 1605 Clearance between columns (hxv) [mm] 1550 x 1200 Min./max. mold height [mm] 500 / 1300 Maximum opening width [mm] 2400 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2799 Injection weight [g] 2407 Injection pressure [bar] 2300 Electrical and hydraulic equipment Rated power of the pump motor [kW] 150 Heater power [kW] 44.1 Dimensions and weight Net weight with control cabinet [t] 52000 Dimensions (length x width x height) [m] 10.45 x 3.18 x 2.82 Injection molding machine included with the Apex robot

Battenfeld HM 60/350S injection molding machine – year of production 2008 – 41421h number – working hours worked. Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 550 x 530 Clearance between columns (hxv) [mm] 370 x 320 injection unit Screw diameter [mm] 35 Injection volume [cm3] 169 Injection weight [g] 153.8 Injection pressure [bar] 2083 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 10.4 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.79x1.24x1.88 – control b6

Netstal S 600-230 injection molding machine year 2007 Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 617 x 600 Clearance between columns (hxv) [mm] 410 x 410 min./ max. mold height [mm] 200 - 500 Maximum opening width [mm] 540 injection unit Screw diameter [mm] 32 Injection volume [cm3] 123 Injection weight [g] 118 Injection pressure [bar] 1890

Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 kN -The clearance between the columns vertical: 420 mm -The clearance between the columns pos: 420 mm -Size plates of the table pos: 650 mm -Dimension of the vertical table plates: 650 mm -Mold height min: 275 mm -Plate spacing: 850 mm -Opening path: 575 mm -Ejector: 175 mm -Ejection: 40 kN Injection Specifications: -Screw diameter: 55 mm - Injection volume: 353 ccm -Injection pressure: 2080 bar - Screw rotation speed: 59 min -Worm torque: 880 N - Air injection rate: 214 g / s PS -1 hydraulic core -Hydraulic ejector Dimensions and weight: -Dimensions in: 4.82m x 1.48m x 2.18m -Total weight in: 5400KG

Arburg 320K 700-250 injection molding machine Year - 03/2004 PP materials used CLOSING UNIT Closing force (Ton) 70 Space between columns (mm) 320 × 320 Column diameter (mm) 60 Plate size (H x V) (mm) 476 × 476 Mold Height (Max.- Min) (mm) 400-200 Space between plates (mm) 650 Closing speed (mm / s) 88 (l / min) Opening stroke (Max) (mm) 250 Ejection force (kN) 30 Opening stroke (mm) 70 Cores (YES / NO) NO INJECTION UNIT Screw diameter (mm) 35 Injection weight (Max) (Material) (g) 121 Volume (cm3) 144 Injection pressure (bar) 1820 Injection rate (cm3 / s) 154 Nozzle force (Max) (Ton) 70 Nozzle stroke (Max) (mm) 240 Plasticization efficiency (g / s) 141 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37 × 1.405 × 1.99 Total energy consumption (Kw) 35 Robot Manufacturers  ...

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.

Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 520C 1600-350 with Multilift Control Selogica Year of manufacture: 2001 operating hours: 55400 h constantly maintained (until 2022 by Arburg) Special features/extras: -Multilift Robot Closing side: Clamping force: 1600 kN/ 160 tons tie bar size hxv 520 x 520 mm platen size hxv: 728 x 728 mm Installation height min: 250 mm platen distance max: 900 mm opening stroke: 650 mm ejector stroke: 225 mm ejector force: 66 kN Injection side screw diameter 45 mm Stroke volume 230 ccm injection weight: 210 gr./hp injection pressure: 1670 bar dimensions: 5750 x 1950 x 2350 mm (L x W x H) Weight: 6.500 kg. - from week 48 2022 immediately available in our warehouse Hannover/Germany - Function tested (guaranteed function until first start-up)

very well maintained and constantly serviced injection moulding machine Manufacturer: Engel Type: VC 500/120 spex Control CC200 year of construction: 2010 Operating hours: 42500 h constantly maintained Special features/extras: 1 x core pull (on BAP) Hot runner: 4 circuits Clamping side: Clamping force: 1200 kN/ 120 tons Tie bar dimensions H X V tie bar-less Platen size hxv: 740 x 680 mm Installation height min: 200 mm Distance between platens max.: 700 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Injection side Screw diameter 40 mm Shot volume 251 ccm Injection weight: 230 gr./hp Injection pressure: 1297 bar (2023 bar increased) H2khaheng Dimensions: 4.82 x 1.48 x 2.01 (L x W x H) Weight: 6,800 kg. - immediately available now in our warehouse in Hanover free on truck or free to your door against freight reimburs ...

Arburg 320 C 500-270 injection moulding machine Year of production: 2007 Control type: Selogica Clamping System: Hydraulic TECHNICAL DATA Closing force: 500 kN Clearance between columns: 320 mm x 320 mm Plate dimensions: 446 mm x 446 mm Mould size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 35 mm Injection Volume / Injection Weight: 115 ccm / 105 gram PS Injection pressure: 1470 bar GENERAL DATA Motor: 11KW Heaters: 9.5 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 2400 kg

Engel ES 1350/250 HL injection molding machine Year of production - 1997 Closing unit: closing force: 2500 kN size of forming plates h: 1050 mm size of forming plates v: 650 mm min. mold height: 350 mm opening distance: 1200 mm opening stroke: 850 mm ejector stroke: 200 mm ejector force: 82 kNj Injection system: Screw diameter - 55 mm Injection volume - 618 cc Injection weight - 556 g number of heating zones: 5 nozzle stroke: 50 technical data of the robot-system Robot Engel Year of construction: 1997 handling weight: 10 kg X axis: 500mm Y axis: 1000mm Z axis: 2360mm

Arburg 470C 1500-350 injection molding machine Year of manufacture: 2005 Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min. 250 injection unit Screw diameter [mm] 35 Injection weight [g] 127 Injection pressure [bar] 2500 Electric-hydraulic equipment Nominal power of the pump motor [kW] 25 Heater power [kW] 16.9 Dimensions and weight Net weight with control cabinet [t] 4.56 Dimensions (L x W x H) [m] 4.60 x 1.70 x 1.80

Demag Extra 100-430 injection molding machine Year of manufacture -2004 NC control 4 Clamping force - 1000 kN Column spacing - 400X400 mm The dimensions of the boards are 540X540 mm Min. mold height - 250 mm Screw diameter - 40 mm Injection weight - 208 g Injection volume - 231 cc Injection pressure - 2025 bar Hydraulic cores - 1 Air valves - 1

Year of production: 2004 Total installed power: 185 kW Max. injection speed: 160 mm / s Max. injection pressure: 1560 bar Screw diameter: Ø76 mm Max. shot weight for PP: 1020 g Mold closing force: 6350 kN Clearance between H x V columns (↔ x ↕): 1060 x 960 mm Mold height min: 450 mm Max. mold height: 1000 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 300 mm Centering rings diameter: 160 mm Max. ejector stroke: 300 mm Form H x V clamping plates dimensions: 1500 x 1400 mm Aggregate volume: 2487 g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

Electric injection moulding machine Manufacturer: JSW Model: 55T AD 60H Year of manufacture: 2010 Screw diameter: 28 mm Screw length: 20D Injection volume: 62 cm3 Injection pressure: 2190 bar

Bausch Stroebel KS 1010 machine for injection vials Bausch Stroebel brand for injection vials from approx. 3. f00 vials/h, fully automatic, consisting of: Brand: Bausch Stroebel Model: KS 1010 Stainless steel crimper version for 16-45 mm vials, height 25-80 mm, speed according to product max. 3,500 vials/h. Includes 1 metal lid vibrator, staple station. The team is provided with its anti-cancer protections, monitoring the presence of the lid and its alarms.

Sumitomo Demag injection molding Systec Wittmann Robot Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

1,0 St. gebr. Injection molding machine with robot Manufacturer: ENGEL Type: VICTORY 500/120 Power Year of construction: 2002 Clamping force: 120 tons Tie bar spacing: tie-bar-less Screw diameter: 35 mm Injection volume: 192 cm³ Control: EC100 A03 Equipment: -Robot manufacturer Engel, type: ERC43/1-E, RC-100 Tandem stroke design (smaller overall height of Robots) Travel: X - axis: 500 mm Y - axis: 800 mm Tandem stroke version 500 + 500 mm C-axis (swivel) 0 - 90° -2.0 pcs. core pulls hydraulically on BAP -Highly wear-resistant screw up to 450° C -Clamping plates vertically enlarged

Key data: 500 kN, 45 g/PS, 25 mm

1,0 St. gebr. Injection molding machine Manufacturer: ARBURG Type: 320SC500-250 Year of construction: 1998 Clamping force: 50 tons Tie bar spacing 320 x 320 mm Screws DN: 25 mm Moulded part weight 45 g/hp Control: SELGOCIA Equipment: -1 x Core pull -Interface robot -ASL module -Prepared for injection into the separation plane

Electric injection molding machine model LGE250II (max. clamping force 250t) manufactured by LS Mitron Ltd. Korea. Inter-column distance 640x640mm. Screw diameter 50 mm. Maximum injection on PS 293 gr. Electrical power 10.2 kW. Dimensions (LxWxH) 5.5x1.5x2.1 m. Weight 8.5 tons.

The injection molding machine is in good working order, sold due to the completion of the project. If necessary, it can be seen in operation. Clamping force: 340 t Injection capacity: 113 cm³ Screw diameter: 30 mm Equipment: Turntable

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Haitian MA13000 injection moulding machine Injection size : 8230 cm3 Screw model : C-D130 Power : 214,55 Kw Distance between column : 130 cm x 130 cm , height : 135 cm Equipment in picture like loader,robot,tower are not included Power : 214,55 Kw

I am selling a Nissey injection molding machine made in Japan in 1989. Closing force 1610 kN Distance between columns 460x460 mm Auger diameter 50 mm Injection volume 353 cm³ Material pressure 1715 bar Installed power 32.3 kW Condition - faulty, reason - they did not find a specialist to configure the hydraulic pump control unit after replacing it with a new one. Price is negotiable

This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.

This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.

Used injection moulding machine made by Arburg model Allrounder 221-75-350, new 1984. Closing force: 350 kN/tonne. Injection force: 77 kN/tonne. Operating voltage: 380V, 50Hz. Heating: 3.4 kW. Pump motor: 7.5 kW. Total load: 10.9 kW.

This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.

Injection molding machine ENGEL ES570 for clamping forcé 125 Tons from 1999 in working conditions. Further information please contact. Good price for liquidation. Directly from the factory where they were working.

Engel injection moulding machine old

ENGEL two shot (2k) 2300 ton injection molding machine -Model : DUO 23050H/11050M/2300 COMBI -Manufactured year : 2009

LGH-450M injection molding machine made in Korea. Year of construction 2012 Number of hours worked: 35,000 Clamping force 450 tons. Screw diameter 70 mm. The technical and visual condition is very good. Double-plate closing system

OIMA STRATOS 400 KP plastic injection machine Year 2008

We offer a Negri Bossi CANBIO V90 injection molding machine for sale.

Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658

Battenfeld TM 550/4500 Injection Moulding Machine 550 Ton 55 Kw Working hour: 48500