128,595 used machines on RESALE, but how to find them? Machine Search
B&A REF: 9170 TON: 50 SCREW DIAMETER: 14MM SHOT WEIGHT: 1 STROKE VOLUME: 1.1CM3 INJECTION PRESSURE: 2500AR PLATEN SIZES: 364 X 196MM MIN MOULD HEIGHT: 100MM MOULD OPENING STROKE: 200MM MAX DAYLIGHT: 300MM EJECTOR STROKE: 50MM CONTROLS: UNILOG B4
B&A REF: 9127 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 183 STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 670 X 670MM DBTB: 420 X 420MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 2 AIR VALVES: 2 MOTOR: 15 HEATING CAPACITY: 10.97KW SCREW DRIVE: HYDRAULIC
Key data: 1500 kN, 40 mm
ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...
A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.
A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.
B&A REF: 9024 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 343 STROKE VOLUME: 377CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE
Key data: 2000 kN, 291 g/PS, 45 mm
1.0 St. gebr. Rotary Table Injection Molding Machine Manufacturer: ARBURG Type: 1500T2000-800 Year of Make: 2012 Clamping force: 200 tons Rotary table; 2 x 180° Screws DN: 45 mm Max. displacement: 313 cm³ Moulded part weight: 291 g/hp Control: SELGOCIA Equipment: 1 x Core Pulls
Spritzgießmaschine HUARONG HRN-400 wurde 2008 in Taiwan von HUARONG PLASTIC MACHINERY CO., LTD. gebaut. Die Maschine wird für die wirtschaftliche Produktion von Kunststoffteilen in verschiedenen Farben, Formen und Größen eingesetzt. Diese Teile werden im Spritzgussverfahren hergestellt, bei dem plastifizierter Kunststoff in eine Form eingefüllt und dann mit hoher Presskraft gepresst wird. Um die höchste Produktivität und Wiederholbarkeit der hergestellten Teile zu erreichen, verfügt die Maschine über eine Reihe zuverlässiger Lösungen. Dazu gehören unter anderem ein Präzisions-Formenspannsystem, das mit einer Kraft von 400 Tonnen arbeitet, und ein Potentiometer, das die Position der Formen genau erfasst. Die Verformung der Aufspannplatten hingegen wird durch speziell entwickelte Säulen minimiert. Ein Zentralschmiersystem schmiert kontinuierlich alle beweglichen Teile der ...
An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.
A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.
A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible.
A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.
2 Babyplast-machines for sale. Injection capacity 9 cm3. One is year 2009, one is year 2011
Key data: 1500 kN, 45 mm
Stork S+S1500-850 Year of Make: 2011 Clamping force: 150 tons. Screw diameter: 45 mm Max opening distance: 480 mm Injection pressure: 2100 bar used for PP thin-wall packaging
Key data: 3300 kN, 62 mm
Stork S+3300-2150 Year of Make: 2008 Clamping force: 330 tons Screw diameter: 62 mm Max. opening distance: 620 mm Injection pressure: 2100 bar Material: PP
Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm
Screw diameter: 120 mm Injectable volume / Shot volume: 5598 cm3 Injection pressure : 1137 bar Column passage / Bettween tie bar: 1060 x 1060 mm Mould thickness mini-maxi / Mould tickness mini-max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 Hydraulic Cores / 4 Corepulling
Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING
Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling
Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request
Injection molding machine Krauss Maffei CX 650-3000 BJ 2009
This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.
This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.
This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information.
This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information.
This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.
This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.
This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.
This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information.
This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information.
Manufacturer: Engel Victory 330/80 Model:Victory 330/80 Year of Manufacture: 2006 Operating hours: 95257 Closing force: 80 t Screw diameter: 40 mm Max. injection volume: 154 cm3 Fixing plate: 670 x 600 mm Machine weight: 5.6 t Find more here - / Contact us at -
Manufacturer: Arburg Model:720S 3200/1300 Year of Manufacture: 2010 Operating hours: 84854 Closing force: 320 t Screw diameter: 60 mm Max. injection volume: 664 cm3 Fixing plate: 1030 x 1030 mm Machine weight: 17.5 t Find more here - / Contact us at -
Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt
Key data: 3200 mm, 972 , 65
Screw diameter: 65 mm Injection weight in polystyrene: 972 g Clamping force: 3200 kN Screw diameter: 65 mm Stroke volume: 1068 cm³ Injection weight in polystyrene: 972 g/hp Injection pressure: 2,120 bar Clamping force: 320 t Lights Tie bar spacing H x V: 680 x 680 mm Tool installation height - min.: 250 mm Opening distance: 640 mm Microprocessor control: ABF0100-KEBA2985, 15" Screen text: german Operating instructions: german FHK interface for robots: Euromap 67 Core pull: -- Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 78 kW Total weight: 14,000 kg Total size: 8.0 x 1.9 x 2.4 m Payment terms: 100 % before taking over the machine, net only
Key data: 5500 mm, 1127 , 70
Screw diameter: 70 mm Injection weight in polystyrene: 1127 g Clamping force: 5500 kN Screw diameter: 70 mm Stroke volume: 1239 cm³ Injection weight in polystyrene: 1127 g/hp Injection pressure: 1,990 bar Clamping force: 550 t Lights Tie bar spacing H x V: 920 x 830 mm Tool installation height - min.: 350 mm Opening distance: 750/1300 mm Microprocessor control: KEBA 2880 Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / without water battery: -/- Pump drive power: 55+4 kW Total connected load: 95.4 kW Total weight: 21,000 kg Total size: 7.5 x 2.5 x 2.6 m Payment terms: 100 % before taking over the machine, purely net
2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003
Inv. Num. : 8935 Type: AX 80-380 Producer: Krauss Maffei Created: 2011 Parameters: Control System: MC5 4.5 Clamping force: 80 t Screw diameter: 30 mm
year 2009. injection volume 9 cm3. Immediate ex stock available
BILLION HERCULE 100 T Reference: H260/100 Condition: Very good Technical Specifications: Clamping force: 100 T / 1000 KN Tie bar spacing: 445 x 445 mm Platen dimensions: 630 x 630 mm Mold thickness (Min/Max): 180- 400 mm Opening stroke: 380 mm Injection volume: 139 cm³ Injection pressure: 1843 bar Screw diameter: 35 mm L/D ratio: 20 Dimensions & Weight: Weight: 5 100 kg
Presse à injecter BILLION 200T Bi-matière HERCULE H260-470/200 Commande Dixit 500 Année : 1998 Nombre d’heures: 23 000 heures Caractéristiques des 2 groupes d’injection : Groupe H260 : diamètre 32 mm - volume injectable de 116 cm3 Pression d’injection : 2205 bars Groupe H470 : diamètre 38 mm - volume injectable de 198 cm3 Pressions d’injection : 2327 bars Diamètre bague du plateau : 100 mm Distance entre colonnes : 610 x 610 mm Dimensions des plateau : 870 x 870 mm Course d'ouverture : 560 mm Epaisseur du moule min/max : 280-580mm Capacité du réservoir d’huile : 500 litres Interface robot Robot STAR 1000EMIII 3 Course en X : 2100 mm / Course en Y : 750 mm / Course en Z : 1000 mm
Key data: 7000 , 6785 , 120
Presse à injecter NEGRI BOSSI 700 T Vector Type : V700-12000 Commande : DIMI EL II Force de verrouillage : 700 T Diamètre vis : 120 mm Volume injectable : 6785 cm3 Pression d’injection : 1620 bars Course d’ouverture : 1000 mm Dimensions des plateaux : 1410 x 1310 mm Distance entre colonnes : 1000 x 900 mm Epaisseur moule min/max : 400 - 1000 mm Vis d’injection bi métal 2 noyaux hydrauliques Interface robot Dimensions : 11 x 2,34 x 2,40 m
Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg
Key data: 10000 , 11690 , 155
Presse à injecter SANDRETTO MEGA T 17750/1000 Force de fermeture : 1000 T Diamètre vis : 155 mm Volume théorique d'injection: 11690 cm3 Longueur utile de la vis L/D : 20 Capacité d'injection max : 1450 Capacité de plastification : 275 Pression d'injection : 1520 bars Zone de chauffe : 6 Puissance total de chauffage : 105 KW Epaisseur moule min/max : 450mm /1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1900 L Dimensions : 15,1 x 3,15 x 2,81 m Poids total : 87 000 KG
Key data: 1000 , 3420 , 110
DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot
Key data: 11000 , 1950 , 150
Presse à injecter ENGEL 1100 T Année 1999 Nombre d’heures : 85 000 h Force de fermeture : 1100 T - 11 000 KN Diamètre vis : 150 mm Volume injectable : 10950 cm3 Pression d’injection : 1330 bars Diamètre des colonnes : 230 mm Force d’éjection : 215 N Dimensions des plateaux : 1400 mm x 1150 mm Course d’ouverture : 1800 mm Poids : 77 Tonnes
Key data: 11000 , 13254 , 150
Presse a injecter ITALTECH BS 1100 T Type : BS-1100/13250 Année : 1999 Diamètre vis : 150 mm Volume injectable : 13254 cm3 Pression d’injection : 1520 bars Epaisseur moule : 450 - 1350 mm
Key data: 1100 , 353 , 50
SANDRETTO serie 8 430/110 Clamping force : 110 T Distance between tie bar : 415 X 415 mm Platen dimensions : 610 X 610 mm Mould thickness min / max : 100 - 460 mm Opening strocke : 410 mm Injectable volume : 353 cm3 Pressure on material : 1215 bars Screw diameter : 50 mm Weight : 5700 kg Dimensions : 5,67 x 2,03 x 1,32 m
Key data: 600 , 131 , 35
Injection molding machine SANDRETTO Serie 8 - 60 T Reference : 192 / 60 Screw diameter : 35 mm Injection volume : 131 cm3 Injection pressure : 1450 bars L/D ratio : 21 Distance between tie bars : 325 x 325 mm Platen dimension : 500 x 500 mm Robot interface Dimensions: 5.17 m x 1.17 m x 1.98 m (top) Weight: 4,100 kg
Key data: 4850 , 1768 , 80
SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air blow gun 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m
Injection moulding machine Battenfeld TM 4500/2800 BJ 2002
maximum number of results exceeded
please refine your search
