injection battenfeld used for sale

Description EUROMAP 12 INTERFACE

Description 4 HOT ROOM ZONES AVAILABLE LANGUAGES: ITALIAN ENGLISH GERMAN FRENCH SPANISH ARABIC

Description with hoist it changes molds

Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm

Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm

Description Euromap 67 robot interface plus adapter to euromap 12 hot chambers 4 zones

Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE

For sale are approx. 15 pieces of overhauled or new injection pumps for Deutz 6 cylinders. Please take all data and numbers from pictures. Delivery is possible.

Description E 67 robot interface external control unit for hydraulic radials (2 radials)

Description mold holder planes 740 X 680 New screw and barrell Sprue removal robot ENGEL mod. ER-USP 5 year:2006 pieces falling chute with waste selector

Description working hours: 23.000h

Description SILICONE PRESS 12 zone mold heating water channels 2 zones 6-zone thermoregulator control WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017

Description Working hours: 73.000h New pump.

Description Electrical charge

Description Working hours: 71.800 Electrical charge

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1

Description Working hours: 74.000 Electrical charge

Key data: 550 , 67 , 28

Type: 55 M Built: 2003 Control: Procan MD Closing type: Hydraulic Technical data Closing force: 550 kN Tie bar distance H x V: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance max.: 400 mm Plate spacing max.: 650 mm Screw diameter: 28 mm Lifting volume / spray weight (PS): 73.9 cc / 67 gram hp Spray pressure: 2778 bar General data Engine: 11 kW Heating: 9.6 kW Operating hours: on request Dimensions L x W x H: 3.3 m 1.8 m x 1.3 m Weight: 2430 kg Accessories Screen text: German Manual: Yes Additional equipment: Core train: x2 Robot interface

TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED ORIGINAL. CATERPILLAR MODEL 3406 PUMP -GP- FUEL INJECTION AT OUR STOCK. ITEM NUMBER 4P-1381 SERIAL NO 15770853 IT IS ORIGINAL AND NEW READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Description Working hours: 75.000 Electrical charge

Description Electrical charge

Description Working hour: 72.000 Electric charge

Description Working hours: 47.000

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No Walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller

Description Columbia control Visible in production until April 2024 in the Parma area

ENGEL VC200/50 TEHC PRO -Clamping force : 50 ton -Screw diameter : 25mm -Manufactured year : 2009 x 1 unit & 2010 x 3 untis

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 1.810 x 1.610 mm - Screw diameter: 140 mm - Shot weight max: 8.630 (PE) g - Shot weight max: 10.880 (PS) g - Injection rate: 1.510 cm?/s - Injection volume: 11.820 cm? - Screw speed: 90 / 90 / 75 rpm - Screw L/D ratio: n/a - Nozzle stroke / force max.: 600 mm / kN - Nozzle stroke max: 350 mm - Clamping force: 25.000 kN - Mould opening stroke max: 2.700 mm - Mould height max: 1.700 mm - Mould height min: 900 mm - Daylight between platens max: 3.600 mm - Platen size (h x v): 2.480 x 2.250 mm - Cascades / Sequential valve gates: n/a - Heating zones: n/a - Ejector force: 60 kN - Control: HICOM-5000 - Core pulls: n/a - Oil tank capacity: 3.800 l - Operating hours: 635 - Power: installed max: 85 + 55 +55 +55 +11 kW - Dimensions (long x wide x ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 80 mm - Clamping force: 2.500 kN - Shot weight max: 1.441 g - Injection rate: 2.000 cm?/s - Injection pressure: 1.665 bar - Injection volume: 1.583 cm? - Screw speed: 240 rpm - Screw L/D ratio: 19,3 - Nozzle stroke / force max.: - / 115 mm / kN - Ejector stroke / force max.: 200 / 85 mm / kN - Mould opening stroke max: 850 mm - Mould height min: 345 mm - Daylight between platens max: 1.195 mm - Platen size (h x v): 970 x 1.035 mm - Heating zones: 4 + 1 - Distance between tie-bars (h x v): 630 x 630 mm - Ejector force: 85 kN - Mold opening force: 144 kN - Oil tank capacity: 680 l - Power: installed max: 77 kW - Weight: 18.500 kg - Dimensions (long x wide x high): 8.220 x 2.160 x 2.660 mm

Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW

Description Press with electric extruder NO ROBOT

Description AVAILABLE LANGUAGES: GERMAN - ITALIAN - ENGLISH

included Sepro, with accumulator - Distance between tie-bars (h x v): 630 x 630 mm - Air Valves: 1 - Screw diameter: 60 mm - Shot weight max: 694 g - Injection pressure: 2.144 bar - Injection volume: 763 cm? - Clamping force: 1.750 kN - Mould height min: 295 mm - Daylight between platens max: 750 mm - Heating zones: 4 - Platen size (h x v): 1.035 x 970 mm - Ejector force: 0 kN - Control: IQT6 - Core pulls: 1 - Operating hours: 82.000 - Power: installed max: 55 + 29,3 kW - Weight: 11.200 kg - Dimensions (long x wide x high): 6.900 x 2.000 x 2.600 mm