135,208 used machines on RESALE, but how to find them? Machine Search
RECON Part number: 0212 5807 and 0212 5811 new Upper Part! ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price
RECON Part number: 1227 6584 0 401 430 015 PE12A120/520/6RS1510 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us For further questions we are gladly available!
Injection unit Krauss Maffei size 700 complete with screw cylinder 50 mm Ã?, complete with all valves and servo motor
PE12P110A520/5RS508 D 401 870 070 / RSUV 300-1150 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Complete control CC 90 for ENGEL injection moulding machines
Injection mortar, two-component adhesive, chemical anchors -Manufacturer:BeA, industrial staples staples type HIT-HY 200-A -Quantity: 12 pieces of injection mortar available -Price: per piece -Transport dimensions: 270/100/H60 mm -Weight: 0.8 kg/piece
Key data: 6500 mm, 2013 , 80
Screw diameter: 80 mm Injection weight in polystyrene: 2013 g Clamping force: 6500 kN Screw diameter: 80 mm Stroke volume: 2212 cm³ Injection weight in polystyrene: 2013 g/hp Injection pressure: 2,090 bar Clamping force: 650 t Lights Tie-bar spacing H x V: 1040 x 910 mm Tool installation height - min.: 400 mm Opening distance: 500/1350 mm Microprocessor control: KEBA 2985- 15' tou screen Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / Without water battery: -/- Pump drive power: 65 kW Total connected load: 84 kW Total weight: 28,000 kg Total size: 7.7 x 2.6 x 2.7 m Payment terms: 100 % before taking over the machine, net only
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.
Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details.
Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA900ІІ features a clamping force of 900 kN and a mold opening stroke of 320 mm. It has a screw diameter of 36 mm and a theoretical shot volume of 153 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA900ІІ machine we have for sale. Contact us for further details.
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available
motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible
Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.
The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.
PLASTIC MOLDING MACHINE FOR CONSTRUCTION POWER: 600 TON FLOOR FROM 1130 X 1130 MM SWITCHING BETWEEN COLUMNS: 730 X 730 MM
A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.
Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.
VERTICAL PRESS RUTIL MODEL: ZEUSS1000TCDDB MATR. C06/100 YEAR: 2000 CLOSING FORCE: 1000 TON VOLTAGE: 380 V FREQUENCY: 50 HZ POWER: 216 KW PRESS. AIR: 6 BAR PRESS H20:4.5 BAR
Key data: 600 , 132 , 35
Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment
Key data: 800 , 132 , 35
Manufacturer/Manufacturer: Arburg Typ/Type: 370C 800-250 Bau-year year: 2003 Control/Controller: Selogica Clothing kraft/Clamping Force: 800 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 34 mm Lifting volume/shot volume: 144 cc/132 gram hp Spez. Spray./injection pressure: 1820 bar General General Motor/Motor Power: 15 kW Heating/heating power: 8.6 kW Dimensions: 4.2 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap
Key data: 1300 , 194 , 45
Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1300 kN-350 Bau-year year: 1999 Control/Controller: Selogica Closing Power/Clamping Force: 1300 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 605 mm x 605 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cc/166 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap Vario
Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.
2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T
Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.
1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T
Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro
Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.
Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.
Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )
Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel
used
Manufacturer: KraussMaffei Model: 420-1000 CX Year of Manufacture: 2016 Type of Machine: Injection moulding machine Capacity: 420T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 7 - Height 2 (cm or m) - Weight 25500 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3; Compressed air 7 (bar or psi) - Cooling or heating - water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines
molds fo caps 1. for glass jars coffe - Caps for glass jars coffe 72 mm and 65 mm - 1500 Euro 2. Saint Gabin - few moulds 6 cav. - 3.000 Euro
maximum number of results exceeded
please refine your search
250 € 
