134,294 used machines on RESALE, but how to find them? Machine Search
clamping force: 300 kN injection volume: 180 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine for rubber - second-hand Clamping unit: - Clamping unit: vertical - Clamping force: 300 kN - Platen size: 300 x 300 mm Injection unit: - Maximum injection volume: 180 cm³ - Mains supply: 3x 400 V, 50 Hz - Power rating: 11 kW - Control system: MAPLAN The machine is still in production and can be viewed in operation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.
A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating h ...
Key data: 3500 kN, 70 mm
Netstal EVOS 3500/2900 - 350T Year: 2010 Model: EVOS 3500/2900 Tonnage: 350T Operating hours: 60,000 h Screw diameter: 70 mm L/D ratio: 27 Injection pressure : 2400 bar Injection volume (max.): 1078 cm³ Mold thickness (min./max.): 700 – 1150 mm Distance between tiebar (H x V): 730 x 730 mm Platen dimensions: 922 x 1086 mm Weight: 25,000 kg
clamping force: 4.500 kN injection volume: 5.000 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 10000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 5,000 cm³ - Injection pressure: 2060 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 38 kW - Installed heating capacity: 67.5 kW - Weight: Clamping unit approx.: 8,900 kg Injection unit approx.: 3,200 kg Hydraulic unit with oil and control cabinet 2,350 kg - For dimensions, see the installation data in the appendix There are 6 machines available, manufactured between 2001 and 2004. The data ...
BORCHE BS 200 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of technical components and everyday products made from plastics of various shapes and for various purposes. A clamping force of 200 tonnes, combined with reliable components, ensures high efficiency even during intensive mass production. The parts are made by injection moulding, a process which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This method enables the rapid production of parts with complex geometries whilst maintaining high repeatability and a high-quality finished product. The BORCHE BS200-III Plus injection moulding machine can be further equipped with production automation systems that increase the efficiency of the entire ...
ENGEL ES 1350/275 HL ST injection moulding machine was manufactured in 1999 in Austria by ENGEL Austria GmbH. The machine is designed for the economical production of plastic parts in various shapes, colours and for various purposes. This process utilises the injection moulding method, which involves injecting plastified plastic into a closed mould, where the material cools and takes on the mould’s shape. The combination of a high clamping force of 275 tonnes with proven components ensures high efficiency even during demanding series production. The ENGEL ES 1350/275 HL ST is fitted with a 60 mm diameter screw, which is responsible for plasticising the material and precisely feeding it into the injection mould. The ability to operate at increased injection pressure enables the processing of more demanding plastics and the precise filling of moulds with complex geometries. To increas ...
clamping force: 2.700 kN injection volume: 6.000 cm³ screw diameter: -- mm platen size: 560 x 630 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 2.700 kN - Platen size: 560 x 630 mm - Max. stroke: 550 mm (see data sheet) Injection unit: - Max. injection volume: 6,000 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 28,2 kW - Installed heating capacity: 49,9 kW - Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 1,860 kg Total weight approx.: 10.600 kg - For dime ...
clamping force: 4.500 kN injection volume: 3.300 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 3,300 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N - Motor power: 35,5 kW - Installed heating capacity: 73,9 kW - Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg Total weight approx.: 16.300 kg - For dimensions, see the installation data in the appe ...
clamping force: 4.500 kN injection volume: 5.600 cm³ screw diameter: 610 - 985 mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 610 - 985 mm (see data sheet) Injection unit: - Injection unit type: ADV - Max. injection volume: 5,600 cm³ - Injection pressure: 2200 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Pump capacity: 27 kW - Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.: 21,000 kg - For dimensions, see the installation data in the appendix The data for this ad w ...
Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings
NEGRI BOSSI V 160 - 610 CANBIO ?Année : 2001 Force de fermeture : 160T Volume injectable : 360 cm3? Capacité d’injection : 330 gr de PS? Diamètre de vis : 45 mm? Pression d’injection : 1700 bars ?Épaisseur moule mini/max : 170 - 550 mm ?Course d’ouverture : 460 mm? Entre colonnes H-V : 510 × 450 mm Dimensions des plateaux : 780 x 730 mm? Commande : DIMI EL 2 Interface colorateur? Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 5,72 x 1,47 x 2,15 m Poids : 6150 kg
Key data: 3200 , 1035 , 70
NEGRI BOSSI 320 T type V320-2000CANBIO? Année : 2000 Force de fermeture : 320 T Diamètre vis : 70 mm Rapport L/D : 20 Volume d’injection : 1150 cm3? Capacité d’injection : 1035 gr de PS? Pression d’injection : 1700 bars ?Épaisseur moule mini/max : 250/700 mm Entre colonnes H-V : 630-570 mm Dimensions des plateaux : 970 x 940 mm? Commande : DIMI EL 2 Interface colorateur Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 7,55 x 1,80 x 2,24 m Poids : 12 300 kg
BORCHE BH500 injection moulding machine was built in 2016 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of plastic components used in many industrial sectors and in everyday products. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This technology enables the rapid and precise production of repeatable components with complex geometries. The BORCHE BH500 has been designed for demanding mass production and intensive use. The machine is equipped, among others, with an 80 mm diameter screw and a precision mould clamping system with a force of 500 tonnes, which ensures a stable process. All operating parameters are programmed via the intuitive KEBA control system, which enables con ...
ARBURG ALLROUNDER 720S 3200-2100 injection moulding machine was built in 2008 in Germany by ARBURG GmbH + Co KG. The machine is designed for the efficient mass production of plastic components used across a wide range of industries. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. A 60 mm diameter screw and a precision mould clamping system with a clamping force of 320 tonnes ensure the process runs smoothly, guaranteeing high repeatability and quality of the parts produced. The ARBURG ALLROUNDER 720S 3200-2100 is offered with a comprehensive range of equipment that increases the level of automation of the production process. All process parameters are programmed in the intuitive SELOGICA control system, which ensures convenient ...
NEGRI BOSSI 55 T type V55-200 CANBIO? Force de fermeture : 55 T Diamètre vis : 28 mm Rapport L/D : 20 Volume d’injection : 92 cm3? Capacité d’injection : 84 gr de PS? Pression d’injection : 2100 bars? Épaisseur moule mini/max : 120/350 mm ?Entre colonnes H-V : 315 x 280 mm Dimensions des plateaux : 455 x 430 mm? Commande : DIMI EL 2 Interface colorateur ?Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 3,72 x 1,18 x 1,80 m Poids : 2000 kg
Key data: 2000 , 50
KRAUSS MAFFEI 200 T type CX 200-750 Clamping force: 200 T Year: 2011 33 000 operating hours Screw diameter: 50 Injection volume: 393 cm3 Injection pressure: 1892 bars Tie-bar spacing: 560 x 560 mm Opening stroke : 700 mm Maximal distance between platen : 1050 mm Power install : 37 KW Dimensions : 5,20 x 2 x 2 m Weight : 11 500 kg
Key data: 3200 , 694 , 60
FERROMATIK MILACRON K 320-S injection molding machine Clamping force: 320T / 3200 KN Year: 1997 Screw diameter: 60 Injection weight : 694 gr Injection volume: 710 cm3 Injection pressure: 2144 bars Tie-bar spacing: 750 x 750 mm Weight : 18 800 kg
Key data: 1250 , 174 , 43
SANDRETTO serie 9 T 430/125 Clamping force : 125 T / 1250 KN Distance between tie bar : 475 x 475 mm Platen dimensions : 600 x 600 mm Mould thickness min / max : 150 - 480 mm Opening strocke : 470 mm Screw diameter : 43 mm Injectable volume : 274 cm3 Pressure on material : 1566 bars Weight : 6200kg
Key data: 3200 , 845 , 65
HAITIAN SATURN 320 T Type: SA 3200/1700 Closing Force: 320 T Year: 2008 Screw Diameter: 65 mm Injection Volume: 929 cm³ Injection Pressure: 1820 bar L/D Ratio: 20 Distance Between Tie bar : 680 x 680 mm Opening Stroke: 640 mm Mold Thickness (min/max) : 250/680 mm Motor Power: 37 kW Dimensions : 6,9 x 1,91 x 2,08 m Weight : 13 T
Key data: 3800 , 1693 , 80
HAITIAN MARS MA3800 II S year : 2020 Type: MA 3800 II S Injection group : 3200 Clamping Force : 380 T Year: 2020 Screw Diameter: 80 mm Injection Volume: 1693 cm³ Injection Pressure: 1860 bar L/D Ratio: 20 Distance Between Tie bar : 730 x 730 mm Opening Stroke: 700 mm Mold Thickness (min/max) : 280/730 mm Servo Motor Power: 355 kW Dimensions : 8,33 x 1,79 x 2,60 m Weight : 15,4 T
Key data: 1200 , 134 , 36
HAITIAN ZHAFIR VENUS 120 T Type: VE 1200/300 Closing Force: 120 T Year: 2012 Screw Diameter: 36 mm Injection Volume: 147 cm³ Weight in PS : 134 gr Injection Pressure: 2000 bar L/D Ratio: 20 Distance Between Tie bar : 470 x 470 mm Opening Stroke: 360 mm Mold Thickness (min/max) : 150/480 mm Motor Power: 18 kW Dimensions : 5 x 1,50 x 2,20 m Weight : 5,40 T
ENGEL DUO 500 T type 4550/500 pico Force de fermeture : 500 T / 5000 KN Année : 2013 Nombre d’heures : 48 000 h Diamètre vis. : 90 mm Volume injectable : 2480 cm3 Entre colonnes : 830 x 915 mm Dimensions des plateaux : 1270 x 1260 mm Epaisseur moule min/max : 350/900 mm Ecart maximal entre plateaux : 1650 mm Dimensions : 7,80 x 2,40 x 2,36 m Poids : 14 T + 7 T
Key data: 800 kN, 100 g/PS, 35 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence
Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany
Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany
Specification Injection Moulding Machine Demag Extra 35-80 General data Clamping force: 35 t Year of Make: 2007 Control: NC4 / MC4 Clamping unit Size of the clamping plates: 390 x 390 mm Lights spar spacing: 280 x 280 mm Ejector force: 26 kN Ejector travel: 100 mm Injection unit Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Spray volume: 42 cc Injection weight in hp: 37 g L/D Screw Ratio: 20 Machine weight: approx. 2,200 kg Equipment: hydraulic core pull, pneumatic valve Location: Aachen, Germany
Specification Injection Molding Machine Ferromatik (Milacron) Magna T Servo 110-450 General data Clamping force: 110 t Year of Make: 2017 Drive: Servo Clamping unit Lights spar spacing: 435 x 435 mm Tool installation height: min. 150 / max. 480 mm Opening travel: 350 mm Max. plate spacing: 830 mm Injection unit: 450 Screw diameter: 40 mm Location: Aachen, Germany
Specification Injection Molding Machine Ferromatik Milacron Magna T150 General data Clamping force: 150 t Year of Make: 2016 Clamping unit Clearance spar spacing: 510 x 510 mm Max. plate spacing: 950 mm Injection unit: 630 Screw diameter: 45 mm Location: Aachen, Germany
Specification Injection Molding Machine Demag Systec 210/580-840 (Servo) General data Clamping force: 210 t Year of Make: 2019 Control: NC5 / MC5 Clamping unit Size of the clamping plates: 860 x 860 mm Lights spar spacing: 580 x 580 mm Opening travel: 790 mm Ejector travel: 180 mm Injection unit Screw diameter: 60 mm Injection volume: 636 cc Injection weight in hp: 579 g Spec. Spray pressure: 1352 bar L/D Screw Ratio: 20 Facilities Pump drive power: 26.0 kW Servo motor drive Bimetal, wear-resistant screw Flexible clamping unit with multiple ejector and core movements Ejector with position control Injection with control pump (p+v-controlled, closed loop) Pressure return system (RSP), 3-part Reinforced oil cooling system (supply up to 35 °C) Location: Aachen, Germany
ENGEL 220 T Type VICTORY VC 1050 / 220 TECH PRO Année : 2015 Nombre d’heures : 35 250 h Diamètre vis : 60 mm Volume injectable : 603 cm3 Epaisseur moule mini : 300 mm Poids : 13 tonnes
ENGEL VICTOY 160 T Type: VICTORY 860/160 spex Clamping force: 160 T / 1600 KN Year: 2017 Number of hours: 36,900 hours Screw diameter: 55 mm Injectable volume: 508 cm3 Dimensions of the trays. : 750 x 750 mm Min mould thickness: 250 mm Dimensions: 5.80 x 1.70 x 2.40 m Weight: 8900 kg
clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...
clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 + ...
Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible.
NETSTAL SYN 1500-460 ist eine Plastikspritzmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schliesskraft: 150 to; Hubvolumen: 201 cm3; Schneckendurchmesser: 40 mm; Auswerferhub: 150 mm; Auswerferkraft: 49 kN; Einspritzdruck: 2218 bar. Technische Daten: von 20 t/min bis 300 t/min; Formenheizung 20 kW; Schneckengetriebemotor 30 kW; Maschinengewicht ca. 9000 kg; Maße L×B×H 5700×1650×2220 mm. Erreicht enge Toleranzen; geeignet für Automotive, Medizintechnik, Luftfahrt und Elektronik Technische Daten ohne Gewähr
Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008
Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009
Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006
Injection Molding Machine Ferromatik 110s-2F BJ 1999
Injection moulding machine Ferromatik K 125s/2f BJ 1995
Injection moulding machine Ferromatik K 200s /2F-493 BJ 1999
KRAUSS MAFFEI KM 175-1000 C2 injection moulding machine was manufactured in 2002 in Germany by Krauss-Maffei Kunststofftechnik München Germany. The machine is designed for the mass production of plastic components of various shapes, colours and applications. The components are produced using the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This process enables the production of precise and repeatable components of high quality. The KRAUSS MAFFEI KM 175-1000 C2 is equipped, among others, with a 55 mm diameter screw and a precision mould clamping system with a clamping force of 175 tonnes. Thanks to additional core pulls, the machine can work with more advanced moulds for the production of parts with complex geometries. Day-to-day operation of the machine is fa ...
RECON Part Number: 2.3597-BB 0.00.6-43-12.00-72 Without element ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
BORCHE BS 150 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of plastic parts used in both everyday products and in many industrial sectors. These parts are manufactured using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. As a result, precise and repeatable parts of high quality are produced. The offered machine belongs to the Borche BS Plus series, designed for companies seeking lower operating costs whilst maintaining high production efficiency. Compared with the manufacturer’s standard models, it is equipped with an energy-saving servo drive and a more efficient pump. The BORCHE BS 150 Plus also features, among others, a 45 mm diameter screw and a precise mould ...
Manufacturer: Krauss Maffei Model No.: PrecisionMolding 160-750 Year: 2022 Condition: Used Stock number: 9405 Clamping force: 160 t Screw diameter: 50 mm Injection capacity: 393 cm³ Distance between uprights (horizontal): 570 mm Distance between uprights (vertical): 520 mm
BORCHE BS 120 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of technical components and everyday products made from plastics, in a variety of shapes and for various applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The offered machine represents the Borche BS Plus series, designed for companies seeking high efficiency with reduced operating costs. Compared with the manufacturer’s standard models, it features an energy-saving servo drive and a more efficient pump, enabling more economical operation. The BORCHE BS 120 Plus also stands out with its 40 mm diamete ...
Manufacturer: ARBURG Model: ALLROUNDER Centex 470 C 1500 - 400 Year: 2006 Condition: Used Stock number: 9406 Clamping force: 150 t Screw diameter: 40 mm Injection capacity: 201 cc Maximum distance between mounting plates: 750 mm Injection Molding Stroke: 500 mm Distance between uprights (horizontal): 470 mm Distance between uprights (vertical): 470 mm
ENGEL VC 80/25 TECH injection moulding machine was built in 2004 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components used both in everyday products and in many industrial sectors. These components are produced using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL VC 80/25 TECH is an excellent solution for both single-unit and series production. The machine is equipped, among others, with a 22 mm diameter screw and a precision mould clamping system with a clamping force of 25 tonnes. Day-to-day operation of the injection moulding machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of in ...
ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increase the efficiency of the e ...
maximum number of results exceeded
please refine your search
