injection battenfeld used for sale

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Key data: 1000 kN

BILLION H260 / 100 - 100T Type: H260/100 Clamping Force: 100T Control: Dixit 500 Operating Hours: 25,000 h Distance Between tiebar: 445 x 445 mm Platen Dimensions (H x W): 630 x 630 mm Mold Thickness (Min/Max): 180-400 mm Opening Stroke: 380 mm Weight: 5100 kg Dimensions: 4.6 x 1.7 x 2.1 m

Screw diameter: 50 mm Injectable volume: 422 cm3 Passage between columns: 560 x 510 Moulded thickness: minimum: 200mm- max: 600 mm Opening stroke: 600 mm

Key data: 3200 kN, 75 mm

BILLION HERCULE H2000 Series - 320 T Clamping Force : 320 T - 3200 kN Injection Unit : H 2000 Screw Diameter: 75 mm Year: 1998 Maximum Theoretical Volume : 1259 cm³ Maximum Material Pressure : 1587 bar Maximum Injection Flow Rate : 970 cm³/s Platen Dimensions : 1045 × 1045 mm Distance Between tie bar : 735 × 735 mm Dimensions : 7.6 x 2.1 x 2.6 m Weight : 15,500 kg

Key data: 11000 kN, 150 mm

Clamping force: 1100 T Year: 1999 Working hours: 86,200 h Screw diameter: 150 mm Column diameter: 230 mm Displacement: 10,955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 x 1400 mm Heating capacity: 113 kW (153.64 hp) Total weight: 77,000 kg Clamping Unit (L x L x H) : 5 x 3,5 x 2,6 m Weight : 53T Injection unit(L x L x H) : 5,5 x 2,7 x 2 m Weight : 24T

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm

NEGRI BOSSI CANBIO 210 T type V210-610 Année : 2008 Force de fermeture : 2100 KN - 210 T Diamètre vis : 40 mm Volume injectable: 285 cm3 Capacité d’injection en PS : 260 gr Pression d’injection : 2100 bars Rapport L/D : 22 Débit d'injection maxi : 129 cm3/s 3 zones de chauffe Course d’ouverture moule : 540 mm Epaisseur moule mini / max : 200 - 630 mm Passage entre colonnes : 570 x 510 mm Dimension des plateaux : 870 x 790 mm Puissance moteur de la pompe : 22 kW Puissance totale installée : 35 kW Dimensions : 6,03 x 1,54 x 2,20 m Poids : 8200 Kg

Key data: 8000 kN, 105 mm

Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes

Key data: 8000 kN, 95 mm

Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes

Key data: 130000 kN, 120 mm

Model: KM 1300-12000 MX Year: 2007 Clamping force: 1300 T Screw Diameter: 120 mm Operating Hours: 71,800 Robot: Sepro S5 Robot Year: 2007 Mold thickness (Mini/maxi) : 700 x 1400mm Maximum injection pressure:1758bar Maximum distance between clamping plates: 3050mm Dimension of the clamping plate horizontally : 2150mm Clamping plate dimension vertical : 1910mm Injection Volume: 6786 cm³ Injectable Weight: 6175 g Video: No

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2006 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 70,100 Robot: BZ-V Robot Year: 2006 Mold thickness (Mini/maxi) : 700 x 1600mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3400mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2007 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 64,700 Robot: Sepro S4 Robot Year: 2007 Mold thickness (Mini/maxi) : 1000 x 1900mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3700mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 20000 kN, 135 mm

Model: KM 2000-17200 MC Year: 2003 Clamping force: 2000 T Screw Diameter: 135 mm Operating Hours: 41,400 Robot: Sepo S900 Robot Year: 2003 Mold thickness (Mini/maxi) : 1000 x 1700mm Maximum injection pressure: 1789bar Maximum distance between clamping plates: 3600mm Dimension of the clamping plate horizontally : 2580mm Clamping plate dimension vertical : 2270mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: No

Year: 2020 Operating hours: 8,000h Reference : DE388-E1700C Screw diameter: 65 mm L/D ratio: 20 Injectable volume: 929 cm3 Injectable weight in PS: 846 g Injection pressure: 1890 bar Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 kW Distance between tie bar: 750 x 750 mm Mold thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores 3 blow guns EUROMAP 67

Year: 2021 Working hours : 250h Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 g Injection pressure: 1890 bar Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 kW Distance between tie bar: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67

Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible.

An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine.

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

Key data: 1300 kN, 127 g/PS, 35 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ARBURG Type: 420C1300-350-60 Year of Make: 2003 Clamping force: 130 tons Spar spacing 420 x 420 mm Screws DN 1: 35 mm Moulded part weight in hp: 127 g Screw DN 2: 25 mm Moulded part weight in hp: 45 g Control: Selogica Equipment: . Core train -Robots

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Presse à injecter ENGEL 800 T type DUO 5550/800? Nombre d’heures : 21 000 h ?Force de fermeture : 800 T - 8 000 KN? Diamètre vis : 90 mm? Volume injectable : 2 740 cm3? Pression d’injection : 1920 bars Rapport L/D : 20 Entre colonnes. : 1025 x 935 mm Dimensions des plateaux : 1570 x 1480 mm? Epaisseur moule mini : 650 mm ?Dimensions : 10 080 x 3 000 x 2 120 mm? Poids : 44 Tonnes

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details.

clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 430 x 660 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 800 kN - Mould mounting area: 430 x 660 mm - Clamping/opening stroke: 450 mm - Maximum mould installation height without heating plates: 300 mm - Maximum plate spacing without heating plates: 750 mm - Clamping direction: from below - Ejector stroke: 130 mm - Ejector force: 40 kN Injection unit: - Increased injection pressure: 2,180 bar - Maximum injection volume: 154 cm³ - Screw diameter: 35 mm - Screw length: 20D - Maximum screw speed: 20–400 rpm - Metering stroke: 160 mm - Injection: from above - Nozzle stroke: 250 mm - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power:  ...

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine.

clamping force: -- kN injection volume: -- cm³ screw diameter: -- mm platen size: -- mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising 3x machines, model SAD 114/30 - Year of manufacture: 1999 - Problems with the control system 1x machine, model Super AD 76/15 - Year of manufacture: 2006 - Problems with the control system There are 3 machines built in 1999 and 1 machine built in 2006 available. The price is per unit. If you purchase several units a package price can be arranged. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.

Key data: 1500 kN, 291 g/PS, 45 mm

Arburg 470C-1500-800 Injection moulding machine with conveyor belt and sprue picker (257) Year of production: 2005 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Clamping force [kN]: 1500 Gap spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Minimum mould height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 44,9 Working time [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot connection: Euro 12 Feed hopper: NO

This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.

Key data: 120 kN

Mohrtek injection press, vertical loadable, horizontal pressing machine. please contact for more information

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the  ...

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023

Screw diameter: 75 mm Injectable volume: 1657 cm3 Injection pressure: 2121 bar Column passage: 820 x 820 mm Moulded thickness: minimum: 300mm- max: 850 mm Opening stroke: 950 mm Number Of Cores :3 Robot interface: E12

Key data: 350 kN

Krauss Maffei 35-55 CX - 35T Year: 2005

Engel ES 2550/500 HL - V Hours - 114924 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.894 Maximum shot volume cm3/g 1193 Injection pressure maximum hydr/spec bar 2140 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 5000 Maximum opening stroke (distance between the platens) mm 1700 Minimum installation height mm 500 Distance between tie bars Horizontal mm not applicable Distance between tie bars Vertical mm not applicable Centering ring Diameter nozzle side mm 200 Centering ring Diameter ejector side mm 200 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufactur ...

Screw diameter: 90 mm Injectable volume: 2862 cm3 Injection Pressure: 1472 Column passage: 1100 x 1100 mm Moulded thickness: minimum: 450mm- max: 1200 Opening stroke: 1200 mm Number Of Cores :0 Robot interface: E12 28 heated zones

Manufacturer: Arburg Year of manufacture: 2008 Model: ALLROUNDER 370 S 600-290 Type of machine: Wax spraying machine Condition: already dismantled, ready for collection Find more here - .ucymachines/ Contact us at - sales@ucymachines

Screw diameter: 55 mm double thread Injectable volume: 582 cm3 Injection pressure: 2200 Column passage: 780 x 780 mm Moulded thickness: minimum: 760mm- maximum: 1190 mm Opening stroke: 760 mm Number Of Cores :2 Robot interface: E67 36 heated zones

Used NEGRI BOSSI 700T injection molding machine - Year 2009Technical Specifications & Performance DataThis Negri Bossi injection molding machine delivers high-output performance in the 700-ton clamping class, ideal for producing technical plastic parts and PET preforms that feed downstream used bottling line and industrial packaging operations. Built in 2009, it combines robust Italian engineering with a versatile injection unit and advanced controls for demanding, continuous-duty manufacturing environments common in beverage production supply chains.Manufacturer: Negri BossiModel: VECTOR 7000 H 6500Year: 2009Working hours: 69500Clamping class: 700-ton classScrew diameter: 110 mmShot volume: 4750 cm³Shot weight: 4320 gMaximum injection pressure: 1670 barCore pulling: 4 (2 + 2)Robot interface: YesAir circuits: 4Ejection stroke: 350 mmOpening stroke: 1000 mmMould height (min–max): 400� ...

Screw diameter: 110 mm Injectable volume: 4847cm3 Injection pressure: 1892 bar Column passage: 1270 x 1100 mm Moulded thickness: minimum: 500mm- max: 1200 mm Number Of Cores :4 Robot interface: E67 Servo motor

Used NEGRI BOSSI 800T injection molding machine - year 2010Technical Specifications & Performance DataThis Negri Bossi VECTOR 800T injection molding machine delivers high-output performance for large-format plastic parts and packaging components. As a second hand industrial machine from 2010, it combines robust mechanical design with generous mold space and powerful injection characteristics, ideal for heavy-duty applications and supporting upstream production for industrial packaging and beverage production accessories.Manufacturer: Negri BossiModel family / code: VECTOR 8000H8400 (V800 designation)Year: 2010Working hours: 66000Screw diameter: 110 mmShot volume: 5160 cm³Shot weight: 4700 gInjection pressure: 1620 barEjection stroke: 350 mmTie bar spacing (H x W): 950 x 1100 mmPlaten size (H x W): 1400 x 1550 mmOpening stroke: 1080 mmMold height (min–max): 400–1100 mmCore pull circu ...

Used NEGRI BOSSI 980T injection molding machine - Year 2001Technical Specifications & Performance DataThe Negri Bossi 980T is a high-tonnage injection molding machine engineered for large-part production with consistent precision and reliability. This second hand unit offers robust clamping performance and generous molding space, making it suitable for industrial packaging components and upstream items for beverage production workflows. Manufactured by Negri Bossi, it combines strong mechanics with advanced controls to deliver dependable output within demanding production environments.Manufacturer: Negri BossiModel: 980TType/Code: 9800H11000 (clamp/injection unit designation)Installed power: 174 kWWorking hours: 80000Clamp force class: 9000–11000 (model family range)Screw diameter: 120 mmShot volume: 6785 cm³Shot weight: 6100 gInjection pressure: 1620 barOpening stroke: 1200 mmEjectio ...

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.