induction heat used for sale

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

IBC stainless steel container transport container electrically heated 1,000 ltr. Content: 1.000 Ltr. Working pressure: max. vapour pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded-on construction for use by forklift or pallet truck, Insulating sheath with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Outlet with butterfly valve DN 80 reduced to DN 50, lid DN 400, 1 x safety valve, 1 x Kamlock coupling 1", Total weight 381 kg final use: Food Height: approx. 1,670 mm Width/length: approx. 1,200 mm/1,100 mm

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

Stock number: 3290 INDUCTIONS HEATER Manufacturer: FAG, type: HEATER PSI 24-400 Machine no.: 10167, year of construction: 2011 Specifications: Automatic residual magnetism Max. 28 kVA

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Mol D'art Heating cabinet Model: MD60 Serial: 6 Heating cabinet, variable temp control, three shelves, internal dimensions 1450mm x 600mm x 900mm, 1Ph

Palamine 80ton Upstroke Press (hot press) Platen size: 1525x1150 Daylight gap between top and bottom platen 185cm Max. temperature on platens 600 degrees Type of platen heating Electric 240V Overall footprint size 2160cm x 1525cm

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - / Contact us at -

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - / Contact us at -

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

The 15 kW heating element in Tetra Pak systems is commonly used for heating liquids in processes such as pasteurization and sterilization. Here are some key details regarding this component:, Key Features of the 15 kW Heating Element:, - Power Rating: With a rating of 15 kW, this heating element is capable of providing significant thermal energy, making it suitable for processing large volumes of liquid quickly and efficiently., - Application: Primarily used in food and beverage processing, including pasteurizers, UHT (Ultra-High Temperature) systems, and other equipment where precise temperature control is crucial., - Material: Typically constructed from materials that are resistant to corrosion and can withstand high temperatures, ensuring durability and longevity in harsh processing conditions., - Heating Method: The heating element may employ methods such as conduction or convection  ...

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - / Contact us at -

General SKU430W1383 LocationBarneveld CEcheck Pressure Working pressure4.7 Bar Main Features Heating (medium)Electric Capacity30 KW Temp.90 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Heating medium:Water Temperature3°C-95°C Tank capacity44 l., (26 l.) With pumpcheck Capacity240 l/min With temperature controllercheck Information MakeHuber TypeHTS 30-H6 Mach.No.S506504 Mounted on wheelscheck With switchgearcheck Floorspace1,10x1,10 m Total height1,20 m Weight270 kg Extra SpecificationsThe HTS has no mechanical refrigeration but is fitted with a circulation pump and a plate heat exchanger. This compact circulator provides low cost cooling with a stable pressure and flow to the application. As no mechanical refrigeration system is fitted (compressor etc.), the machine is silent, efficient and energy saving ...

General SKUR0083 LocationBarneveld Main Features Capacity3 KW Motor0.37 KW Temp.90 °C Specified Features - Temperature control unit Vessel sizesdia. 270x400mm Top connections2 Outletdia 40mm With jacketcheck Temperature control units Water heatercheck Electric heatingcheck Heating medium:Fluid Electric capacity3 kW With pump0,37 kW 220-240/380-415 Volt With control30-90 °C MaterialStainless steel General MakeUnknown manufacturer plate is missing Year of constructionunknown Mounted on framecheck Floorspace0,6x0,6 M Total height1,3 M Weight100 KgTemperature control units-Heat exchangers > Temperature control unitsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit  ...

General SKU254S227 MakeElmess (D) TypeDHG01B03St/SE-4 Flow heater No.826280/001 and 826280/002 Mach.No.826280/001 and 826280/002 Year of construction2016 Pressure Working pressure2 Bar Main Features Heating (medium)Electric Capacity8 KW Temp.820 °C Specified Features - Temperature control unit Horizontal:flow heater: Number of tubes:1 Tube diameter76,1mm Tube length900mm Wall thickness tubes2,9mm Max. temperature-10/550...820 degr. C Shell diameter219 mm With jacketcheck Temperature control units Temperating machine:flow heater: Gas heatingcheck Electric capacity4 kW 230 Volt (2x) Temperature-10/550...820 degr. C With temperature controllercheck MaterialStainless steel 1.4541 (321) General LocationBarneveld With switchgear(as is) Floorspace1,6x0,9 M Total height1,2 M Weight700 Kg CEcheck Extra SpecificationsUNUSEDTemperature control unitsElmessHeat e ...

General SKU254S226 MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Year of constructionUnknown LocationBarneveld Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel With jacketcheck General Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is).MiscellaneousHauck (USA)Miscellaneous > MiscellaneousBrand > Hauck (USA) What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

General SKU312X1454 MakeAura Serial113819/1 TypeTST 140/8/185 – 25(50)/32 Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4552 Information Year of construction2011 Mounted on framecheck LocationBarneveld Floorspace11 23 Total height1,9 Weight1000 Extra Specifications Thermal oil secondary control circuit / temperature control station (heating duty) Heat transfer medium: thermal oil (Mobiltherm 603) Heating capacity: 140 kW Supply temperature from heater: 200°C Circulation pump: 8 m³/h, 9 m head, 1.1 kW, 1450 rpm, 3 × 400 V / 50 Hz Electrical control cabinet section with main switch, E-stop, pump/heater controls, and indicator lamps (as is)Temperature control unitsAuraHeat exchangers > Temperature control unitsBrand > Aura What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Re ...

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

General SKU020A140 MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmDiscountScraped surface heat exchangersAlfa LavalDiscountHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU034G143 MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Year of construction1992 / 1982 Mounted on framecheck Material Product contact materialStainless steel 1.4301 (304) Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor15 KW Surface0.6 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Rotor can be cooled/heatedcheck Motor2x 7,5 kW (400 V, 1450 rpm) Speed177 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld With switchcheck Floorspace1,3 x 1,0 m Total height2,0 m Weight650 kg Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barDiscountNew arrivalsScraped surface heat exchangersAlfa  ...

General SKU031H069 MakeAPI Schmidt-Bretten TypeSigma X49 SCL No.PA-087714 Year of construction2005 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface146.8 m2 Size length1100 mm Sizes width400 mm Specified Features - Plate heat exchanger Plate heat exchangers(1x) Heating surface146,8 m2 Capacity142/143 Ltr Number of platens360 Plate sizes± 1100x400mm Connections4x dia. 100mm Max. temperature100 Degr. C. Capacity900 KW MaterialStainless steel 1.4301 (304) With jacketcheck General Floorspace2,5x0,8 M Total height1,6 M Weight1500 KG Extra Specificationssealing material NBR Technical specs Extra informationindicated size is platen size, capacity is 900 KWDiscountPlate heat exchangersApi SchmidtDiscountHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working  ...

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

Grote 16L Heated butter pump 2013, stainless, 16L heated butter pump, agitated hopper, discharge screw, mobile, 3Ph

General SKU031H071 MakeAPI Schmidt-Bretten TypeSigma X49 SBL No.PA-90136 Year of construction2006 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface90.2 m2 Size length1100 mm Sizes width400 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface90,2 m² Capacity86/87 l. Number of platens222 Plate sizes± 1120x400mm Connections4x dia. 100mm Max. temperature100 °C. Capacity700 kW MaterialStainless steel 1.4404 (316L) Information Floorspace1,7x0,6 m Total height1,6 m Weight875 kg CEcheck Extra Specificationssealing material NBR Technical specs Extra informationindicated size is platen size, capacity is 700 KG: platen sizes: 400 x 1120 mmDiscountPlate heat exchangersNew arrivalsApi SchmidtDiscountHeat exchangers > Plate heat exchangersNew arrivalsBrand > Api Schmidt What you can expe ...

A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible.

Die cutting machine ML-1200 NXL with heating plate - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Die cutting machine ML-1200 NXL with heating plate Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Die cutting machine ML-1200 NXL with heating plate Price: 18200 EUR Download PDF Die cutting machine ML-1200 NXL with heating plate The machine is used to cut shapes from the mold (die) of materials such as paper, cardboard, leather, plastics, etc. The machine is brand new. It is the heaviest machine in this format, precise. This model is additionally equipped with a heating plate used for cutt ...

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...

Key data: 28 kVA

Dismantled and stored induction hardening system from Steremat Elektrowärme GmbH type EA 15DA-2C-HF turntable with 50 magnetic workpiece holders and a manual workstation, generator from ELDEC type: HFG 15 DA, HF power 15KW, power consumption at full load 18 KVA, frequency range 150 - 350 kHZ

frequency: 500 kHz Power: 50 KW control: Siemens S7-200 Hardening Unit - Induction | SAET - 3RALA equipped with a FANUC Robot The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3 RALA |3-RALA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated frequency: 120 MHz Power: 60 kW voltage: 14 kV current: 12 A Hardening Unit - Induction | SAET - 3RALA equipped with a FANUC Robot M-6i B The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3 RALA |3-RALA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data on request !

eldec induction hardening system for hardening and tempering workpieces 1. Basic machine and module eldec Mind 750 CNC Modular induction heating system with machine structure made of solid welded assemblies incl. control cabinet with CNC control Siemens 840D sl with OP12 control panel Basic version with a center stand for the Z-axis Basic equipment: Swivel control panel. Feed-through adapter, inductor mount, manual central lubrication, flow rate and temperature monitoring, quenching agent tank and return pump, 2 monitored shower connections, 1 continuous shower connection Travels, workpiece dimensions: Z (servo drive) 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter600 mm Maximum workpiece weight500 kg X-axis servo drive for infinitely variable and controlled positioning of the X-axis X-axis travel: 200 mm Y-axis servo dri ...

Max: 110 degrees, including various accessories Auction-ID: A1-48414-143

Semi-automatic induction sealer for aluminium foils in closures - Closure sizes 15-60mm - Closure sizes 50-120mm

Recon Part Number: 1231 4275 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Auction-ID: A1-48512-184

Auction-ID: A1-48473-16

Neumärker Induction Plate 3.5 kw tested-Buttons Signs of use

Auction-ID: A1-48473-15

Auction-ID: A1-48473-14

frequency: 230 Hz workpiece length: 150 mm work piece width: 150 mm temperature max.: ° muffle size (length): muffle size (width): muffle size (depth): mm total power requirement: 210 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REF-2650 PILLAR UNIFOILER-U 1kW INDUCTION CAP SEALER Manufacturer: PILLAR TECHNOLOGIES Model: UNIFOILER-U (U5R1002000000) Year: 2008 Induction sealing machine for sealing the foil inside the caps of bottles, jars, etc. Air-cooled Stainless steel design Portable cart with casters Power: 1 kW Voltage: 240 V/8 A/50-60 Hz/1PH Foil seal diameter: max. 120mm Room temperature: max. 40 °C Overall dimensions (mm): 900 x 560 x 1,700 (LxWxH) Sealing head: 126 x 51 mm Adjustable height