induction heat used for sale

The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

DHS-200 – 200 T Hydraulic Heating Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a hydraulic heating press DHS-200 with a pressing force of 200 T and an extendable sliding table system. The machine has heating plates ranging in size from 800 × 800 mm, an open height of 800 mm and a hydraulic stroke of 600 mm, and is particularly suitable for laminating, forming and thermal pressing processes with temperature-controlled tools. Technical data + information: Hydraulic Heating Press DHS-200 – 200 T General information - Type: Hydraulic heating press with sliding table - Pressing force: 200 t - Usable area table: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (WxDxH): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

BVM Compacta 5022 EGS Sleever + Inline BVM SC 4530 Heat shrink tunnel, Age 2014, Infeed flighted Conveyor length 1200 mm (approx.), BVM grouping System:, For production of multipacks of upto 4 Stacks side by side, consisting of:, Transport conveyor, width 400 mm, length 1000 mm (approx.), 1 Rake on top with mechanical positioning via frequency converter in servo mode, Including pneumatic flap for producing multipacks of 1, 2, 3 or 4 Stacks side by side, Max. length of Stacks 630 mm, BVM fully enclosing packing/ Sleeving machine Compacta 5022. Fully automatic, fed by conveyor belt with photocell control, including 100 format-data storage locations, Technical Data:, Service side standard : left had side, Sealing length : 500 mm, Passing Height : 220 mm (standard), Belt width infeed/ outfeed conveyor : 400 mm, Speed : upto 120 cycles/ min , Length sealing : continuously working, Film width  ...

Equipment: heatable/coolable, insulation, overpressure,condition: brand new,volume: 3,850,max. overpressure: 3.3,lower bottom: eccentric cone,design: upright,stand shape: feet height adjustable,number of feet: 4,heating/cooling (filter bar): available,temperature control cylinder: half-tube coil,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,insulation material: PU foam,material insulation jacket: stainless steel,insulation thickness: 70,diameter inside: 1.600,diameter outside: 1.800,cylindrical height: 1.250,total height: 3.900,technical documentation: drawing,

Heating elements / heating rod for quail Infra AE NewCeramic( 4 pieces )Infra AE:815/685 400V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Infra AE NewCeramic( 4 Pieces )Quail Infra CE 1360/1230 400V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Infra AE NewCeramic( 4 Pieces )Quail Infra EE 1960/1830 400 V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 Pieces )Piccolo Cross:925/840 230 V 250W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )Piccolo I:725/640 230V 250W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )Piccolo II:1325/1240 450W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace New( 4 Pieces )680 / 630mm230 Volt / 350 WattDetails see picture

Heating Elements / Heating Rod for Quail Furnace New( 4 Pieces )Material :Ceramic715 / 630 mm230 Volt / 250 WattDetails see picture

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )715 / 630 mm230 Volt / 350 WattDetails see picture

Heating Elements / Heating Rod for Quail Furnace New( 4 pieces )680 / 630mm230 Volt / 250 WattDetails see picture

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: A06 Item No.: 246366 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 285 mm -Weight: 0.1kg/pcs

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs

Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater, fan heater, fan heater, switch cabinet fan -Manufacturer: RO/SE fan heater/switch cabinet heater -Type: HH/250s -Power: 250 watts -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: KJT, 599 KIT heating element -Item No.: 1258987 -Power: 250W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 100 mm -Weight: 0.1kg/pcs

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Manufacturer: hotset, heating element -Type: G06 Item No.: 268471 -Power: 800 W 230 V -Number: 3x elements available -Price: per piece -Cartridge dimensions: Ø 8 x 295 mm -Weight: 0.1 kg/piece

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

screw-in heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Power: 9000 watts 230/400 volts -Material: steel (magnetic) -Number: 8x radiators available -Price: per piece -Dimensions: 1020/60/H60 mm -Weight: 1.7 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: HTT, heating element type 2132G311 -Power: about 12 kW 400 V -Bolt circle: Ø 145 x 18 mm -Immersion depth: 800 mm -Total dimensions: 940/185/185 mm -Weight: 13 kg

Mold heating, fan heaters, heating, gas heating, construction heating, construction dryers, heating, hall heating, gas heating for casting molds, foundry technology -Manufacturer: Junker, gas heating WA 26532 on a mobile transport frame -Burner: Wiedemann B202 H2-3 175 kW -Blower: Spelleken 5.5 kW volume flow 500 m³/h -Individual components/accessories: see photos -Dimensions 1500/1250/H2010 mm -Weight 625 kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, heating element, heating register, finned tubular heater -Manufacturer: Siemens, heating element finned tubular heater -Type: Order no.: 2NW 3510 Instr. no.: J100 519 201 -Voltage: 220 V -Power: 1000 W -Immersion depth: 800 mm -Quantity: 2x heating element available -Price per piece -Total dimensions: Ø 122 x 910 mm -Weight: 6.8 kg/pc.

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, heating element, heating register, finned tubular heater -Heating element: finned radiator -Type: unfortunately no type designation -Voltage: V -Power: W -Total dimensions: 825/100/H130 mm -Weight: 8.4 kg

Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Thermal system, fan heater, heating elements, radial heater fan -Handover: in current condition as viewed -Controller/On/Off switch: missing -Heater fan: with temperature display -Heating capacity: unfortunately not specified -Blower: Karl Klein Type DNG 1-1,5K -Blower power: 0.45 kW / 31 m³/min -Outlet: Ø 60 mm -Number: 3x blowers available -Price: per piece -Dimensions: 320/265/H475mm -Weight: 10.2 kg/piece

electric heater, electric radiator, heating coil, electric heating, surface storage heating, surface heating -Manufacturer: Wibo, surface heating type thermatic 1000 with thermostat -Power: 1000 watts -Voltage: 220 V -Number: 2x heating available -Price: per piece -Dimensions: 800/110/H620 mm -Weight: 20 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

Compressors, screw compressor, compressor heating, compressor heating, finned tube radiators, finned tube radiators, finned tube heating - frost guard -Manufacturer: Helios, finned tube radiator from screw compressor BlitzTyp Monsun 7.5 P -Art.No.: 06010021 -Power: 230 V / 1000 Watt -Dimensions: 560/110/H160 mm -Weight: 3.3 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 806-0-4 -Contents: Jacket space 50.7 l / Tube space 22.0 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2120/285/H305 mm -Weight: 146 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg