index v used for sale

; Gross weight [kg]: 5370; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 534

workpiece weight: 279 KG length: ca. von Bett bis Lynette mm : 189 € . max: durchlass 369 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 711- 00 37 48 total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IN: 3x380-500V 50/60Hz 3.7/3.1A OUT: 3x0-Vin 0-1000 Hz 4.1/3.4A 1.5 kW (400V) / 2.0HP (460V)

weight: 4 t X - Y + Z-axis each: 410 mm kN control: Fanuc Axis: 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1400 mm, 1750 mm, 1500 mm

CNC Carousel Lathe with Tool Changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/Retrofit Siemens 828D (retrofit) Face plate diameter: 1,400 mm Face plate loading: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger inlet hole: min. 340 mm Number of plungers: 1 Plunger transverse travel : X 1,900 (+/- 950) mm Plunger perpendicular travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverses: X,Z 8,000 mm/min Transverse beam perpendicular travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm Gear level: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on face plate: max. 40,000 Nm Automatic ...

STIGAL VXstandard plasma cutting machine, manufactured in 2010 in Poland, is used for precision cutting of workpieces with a maximum thickness of 57 mm. The open design with a very robust portal enables free sheet metal loading and guarantees exceptional stability during even the most demanding challenges. The entire workspace is covered by an extraction table with the ECTS system, which effectively levels the contamination generated during machining and ensures comfortable working conditions. All of this is complemented by an intuitive CNC control installed in the operator’s touchscreen control panel, allowing for machine control and control of all cutting process parameters. The STIGAL plasma cutting machine has also been retrofitted with an OB-R 400 rotator, which extends the machining range to tubes with diameters from 40 to 400 mm. Technical specifications of STIGAL VXstandard  ...

centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1500 mm table load: 10 t voltage: 380 V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Modular plant growth chambers Fitotron®, type HGC 1014 V incl. lighting module HQI-T and krypton Temperature range +5°C - +45°C for temperature tests Test room volume approx. 1300l Simpac Control Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on a modular design. Individual modules can be added to or exchanged if necessary. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation in time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation temporal ± 3 to 5% RH Fresh air up to 7.5 m³/h Electricity consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kw Characteristic valu ...

1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. The unit is unused, as good as new. Max. usable cabine dimensions: 670 mm (height); 610 mm (width); 750 mm (depth).

11052026 Modernized 200 hl Brewery with 6 × 540 hl CCTs and Siemens S7 Automation This modernized 200 hl brewhouse was originally manufactured in 1995 by leading German brewing equipment manufacturers including Ziemann, Huppmann, and Seeger. The complete brewhouse underwent a comprehensive rebuild and modernization prior to installation at its current location in 2018. Modernization included complete new operation management system with Siemens S7 series PLC automation system. The brewhouse can produce up to eight brews per day and has previously been operated for High Gravity Brewing (HGB) applications. The designed annual production capacity is approximately 400,000 hl, based on a production rate of 1600 hl per day, five production days per week, and fifty production weeks per year. The brew line process comprises truck malt receiving, one 99-ton storage silo, weighing and mil ...

For sale is a modern narrow-aisle forklift/system forklift with a elevating cab, which has been specially designed for the storage and retrieval of loads as well as picking in very narrow storage aisles. The device is in very good condition and is ideal for high-bay warehouses with high handling capacity. Technical data Type: Order picking stacker for high-bay warehouses Guide system: Rails Year of manufacture: 2023 Serial Number: 6973125 Condition: used / as good as new Nominal load capacity: 1,500 kg Load center of gravity: 600 mm Lifting height: 9,050 mm Platform lifting height: 8,600 mm Mast Type: Triplex Overall height (mast retracted): 4,460 mm Mast height (extended): 11,040 mm Overall length (head retracted): 3,846 mm Vehicle width: 1,270 / 1,520 mm Ground clearance: 60 mm Net weight (without battery): 6,790 kg Battery weight: 1,760 kg Turning radius: 1,698  ...

For sale is a modern narrow-aisle forklift/system forklift with a elevating cab, which has been specially designed for the storage and retrieval of loads as well as picking in very narrow storage aisles. The device is in very good condition and is ideal for high-bay warehouses with high handling capacity. Technical data Type: Order picking stacker for high-bay warehouses Guide System: Induction Loop Year of manufacture: 2023 Serial Number: 6959414 Nominal load capacity: 1,500 kg Load center of gravity: 600 mm Lifting height: 10,250 mm Platform lifting height: 8,600 mm Picking height: 10,200 mm Mast Type: Triplex Overall height (mast retracted): 4,460 mm Mast height (extended): 11,040 mm Overall length (head retracted): 3,846 mm Vehicle width: 1,270 / 1,520 mm Ground clearance: 60 mm Net weight (without battery): 6,790 kg Battery weight: 1,760 kg Turning radius: 1,698 ...

Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details.

5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20.

REF-872 VYC INDUSTRIAL HORIZONTAL AUTOCLAVE 4 BASKETS Cylindrical and fixed horizontal autoclave for sterilizing food products. The equipment is entirely made of AISI 304 stainless steel. Manufacturer: VYC INDUSTRIAL, S.A. Type: AE-7800 Year of manufacture: 2002 Maximum service pressure: 2 bar Design pressure: 2 bar Bell pressure: 2 bar Hydraulic test pressure: 3 bar Maximum service temperature: 110 °C Design temperature: 150 °C Elastic limit in design temperature: 140 n/mm2 Volume: 7.8 m3 Contained fluids: water/air Material: AISI 304 stainless steel. Chamber dimensions: diameter 1,480 mm, length 4,500 mm. Complete with 8 baskets made of stainless-steel sheet metal and 6 dollies to move them. Basket dimensions: Inside 980x1,000x950 mm / Outside 1,070x1,060x975 mm. Total dimensions: width 2.000 mm, height 2.500 mm, length 7.000 mm Recently overhauled ...

This 3-axis Vision Wide Vision gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,530 mm, and Z-axis travel of 750 mm. The spacious work table size of 2,000 × 1,530 mm makes it ideal for large, flat workpieces. If you are looking to get high-quality milling capabilities, consider the Vision Wide Vision gantry milling machine we have for sale. Contact us for further details.

Optical measurement machine manufactured in 2023. This VISCOM S3016 features a maximum PCB dimension capacity of up to 430 mm x 610 mm and includes an uninterruptible power supply. It is equipped with 4 orthogonal cameras and offers high-resolution inspection capabilities. If you are looking to get high-quality inspection capabilities, consider the VISCOM S3016 optical measurement machine we have for sale. Contact us for further details.

200941,789 h864,086 strokes4,550 mm2,300 kN (230 t)Cybelec ModEva 10S23,400 kg400 l3 x 400 V / 50 Hz AC24 V37 kVA80 A06/2026Various punches and dies

- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m

FLADDER 200/GYRO-1000 VAC deburring machine was built in 2018 in Denmark by Fladder Danmark A/S. The machine, designed for the precise removal of burrs, edge rounding and surface finishing of metal parts, is an excellent solution for both small and large production plants. The combination of proven solutions with reliable components ensures high machining repeatability over the entire service life. The finishing process is performed fully automatically by conical 6 spindles, arranged in pairs on a gear head. The spindles simultaneously rotate around their own axes and perform an orbital movement, enabling machining in all directions. This design guarantees a uniform surface finish regardless of how the workpiece is positioned on the conveyor belt. Each spindle is additionally equipped with the Lock-it system, which facilitates the fitting and balancing of the abrasive brushes. The  ...

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

The machine is immediately available and it has few operating hours Technical data - please see the attachment or on our website abc.kahlschlichterle under diverse machines - art.-no. 1354

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

Suitable for piccolo bottles With optical orientation for sparkling wine Working direction: left-right

Key data: 750 KW, 1500 1/min

MWM Engine TBD602-V16 Diesel engine from 1980, 1 available 750 KW x 1,500 rpm Manufacturer: MWM Model No.: TBD602-V16 Type: Diesel Engine Serial Number: 80 79 53 Power [KW]: 750 Year of Make: 1980 Operating hours: unknown Total weight [kg]: 10,000

Wolf vertical bagging machine, With 2021 Herma labeler and a markem Printer

Shredder with external feed, metal separator, etc. very good condition, many spare parts, immediately ready for use!

FADAL VMC 2016L CNC machining center was built in 1997 in the United States. The machine, designed for precision machining of workpieces, has a large, fully illuminated work area, with automatic tool changer (ATC) and a reliable spindle. Excellent dynamics and feed repeatability are ensured by precision guideways along which the X,Y,Z axes are guided. All this is complemented by the intuitive CNC control where machining programmes are created in just a few steps. All this makes the VMC 2016L CNC vertical machining center the perfect solution for any production facility. Technical specifications of the FADAL VMC 2016L CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 500/400/700 mm - work table dimensions (L x W): 750 x 410 mm - number of T-slots: 3 - maximum spindle rotational speed: 7500 rpm - automatic tool changer (ATC) - maximum tool diameter: 7 ...

Vogelsang MP 825 pallet racking system Vogelsang pallet racking system (type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per field (spread over 4 levels, each with 3 Euro pallets next to each other with a field width of 2,700 mm). The facility consists of 1 basic field and 7 cultivation fields and results in a total length of approx. 22 meters. Thanks to the grating shelves, the rack can be used extremely flexibly – even for general cargo, picked goods or damaged pallets. Maximum safety is ensured by the push-through protection devices and rear wall grilles included in the scope of delivery. The perfect protection against unintentional pushing or falling of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22000 mm Height: 6200 mm Depth: 1200 mm Span: 2700 mm Fields: 8 Levels: 4 incl. floor space Truss type: IN ...

OKK VM5-II CNC machining center built in 2002 in Japan, is used for precision machining of workpieces. The machine features a large workspace, which includes among others a 30-position tool magazine and a reliable spindle, operating at a maximum speed of 8000 rpm. The design, made from high-quality raw materials, ensures exceptional rigidity and stability, even during the most intensive challenges. The OKK VM5-2 CNC vertical machining center weighs 6806 kg. Technical specifications of the OKK VM5-II CNC milling machine - CNC controller: FANUC Series 16i-M - feed in X/Y/Z axis: 1020/510/510 mm - work table dimensions (L x W): 1049 x 561 mm - maximum spindle rotational speed: 8000 rpm - 30-position tool magazine - tool holder: BT 40 - number of T-slots: 5 - installed power: 47 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3330 x 2830 x 3000 mm - weight of mach ...

Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.

Grinding wheels, grinding elements, cup wheel, double bench grinder, surface grinding wheel, bench grinder wheel -Manufacturer: Tyrolit, ceramic grinding wheel 200x50x28 mm, unused -Type: 89A 46 J 8 V53 -Number: 4x discs available -Price: per piece -Dimensions: Ø 200 x 28 mm -Weight: 2.5 kg/pc.

Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

-Sourdough Fast Fermenter -Model: BRSSF100 -Mobile on castors -completely in stainless steel -400 volts -1.5 kW -Year of construction 2012 -External dimensions approx.: 64x70x125cm WxDxH

Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed

Key data: 500 KW, 600 kVA, 400 V

Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997

Pneumatic semi-automatic filling machine. Dosing volume: 50ml to 1000ml.

Service reset tool, electronic diagnostic and reset device -Manufacturer: Vestatec, Service Reset -Type: VSR-V -Item No.: 600004 -Case dimensions: 320/275/H60 mm -Weight: 0.7 kg

COMMERCIAL OFFER Supply of Four (4) MWM TCG 2032 V16 Gas Generator Sets – Dismantled Condition Date: 06 August 2026 Reference: Offer for 4 × MWM TCG 2032 V16 Gas Gensets Seller: AJAM ENERGY SOLUTIONS F.Z.E AJAM UAE. 1. Introduction We are pleased to submit our offer for the sale and supply of four (4) complete MWM TCG 2032 V16 Gas Generator Sets in dismantled condition, including all major mechanical, electrical, gas, cooling, and auxiliary equipment as detailed below. The equipment originates from a power generation facility and is offered as a complete package. All components have been professionally dismantled and packed for transportation. 2. Scope of Supply A. Gas Generator Sets 4 × MWM TCG 2032 V16 Gas Engine Generator Sets Each set consists of: MWM TCG 2032 V16 gas engine AVK alternator/generator Associated engine-mounted accessories Dimensions ...

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

Used Used oil filler Rcm 16 valves: Year: 1998 Condition: As Is Used oil filler Rcm 16 valves year: 1998 speed: 2.000 bph clockwise directions safety protections working machine Code: T 11 More details: https://bottlingscout.com

Used Used filler Vir Mauri Mutina isobaric 5.000 bph: Year: 1997 Condition: As Is Used filler Vir Mauri Mutina | isobaric Filler isobaric 36 valves Year: 1997 Velocit?: 5.000 bph with still wine 4.000 bph with champagne Clockwise directions Bottles equipments: da 0.375 a 0.75 l Safety protections Code: T 33 More details: https://bottlingscout.com

Used Used filler Alfatek low vacuum 3.500 bph: Year: 1995 Condition: As Is Used filler Alfatek 20 valves Year: 1995. Speed: 3.500 bph Direction: Clockwise Filler 20 valves Type of filling: low vacuum Safety protections Code: T 82 More details: https://bottlingscout.com

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Used Used filler Ocim vacuum filling 3.000 bph: Year: 1988 Condition: As Is Used filler ocim vacuum filling Year: 1988. Speed: 3.000 bph. Direction: clockwsie. 20 valves | vacuum filling Bell variable in height. Mechanical spring bottle lifting pistons. Machine all in stainless steel. Code: T 87 More details: https://bottlingscout.com