134,859 used machines on RESALE, but how to find them? Machine Search
max. workpiece length: - mm profile spindle: - Stück main drive: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
electric motor, three-phase motor -Power: 1.1 kW -Speed: 1415 rpm -Shaft: Ø 22 x 50 mm -Design: B3 -Protection class: IP 44 -Dimensions: 300/157/H200 mm -Weight: 17 kg
Three-phase motor, electric motor -Power: 2.5 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B35 -Protection class: IP 54 -Dimensions: 395/250/H270 mm -Weight: 30 kg
Three-phase motor, electric motor, gear motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 32 x 80 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 450/360/H270 mm -Weight: 55 kg
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: 0,8 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Power: 0.25 kW -Voltage: 230/400 V -Speed: 900 - 920 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP 56 -Dimensions: 205/130/H170 mm -Weight: 8.3 kg
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 400 mm max. pitch circle: 133,4 mm short taper holder: Gr. 6/ DIN55027 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
geared motor, electric motor -Speed: 40/80 rpm -Power: 0.6/1.0 kW -Design: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Quantity: 1 available -Dimensions: 655/250/H320 mm -Weight: 53.5 kg
Three-phase motor, electric motor -Power: 10 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: EX -Dimensions: 550/440/H315 mm -Weight: 113 kg
Gear motor, electric motor -Speed: 40/80 rpm -Power: 0.7/0.91 kW -Construction: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 685/240/H320 mm -Weight: 60 kg
Input module for valve terminals -Type: VIGE-03-FB-8-5POL -Inputs: 4 -5- pole -175555 -382344 -Dimensions: 42/67/H132 mm -Weight: 0.37 kg
Surveillance camera, video surveillance -comes from a warehouse liquidation: and are unused -Number: 2x cameras in weatherproof housing (300 mm) with heating/thermostat, 230 V. -Price: per piece -Dimensions: 395/130/H130 mm -Weight: 3 kg/piece
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1415 rpm -Shaft: Ø 22 x 47 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 347/198/H220 mm -Weight: 27.3 kg
Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1400 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 250/200/H210 mm -Weight: 12 kg
For sale: Vega radar sensor PS61. XXBAEHKMXX Order number: 2653.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.
faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Power: 2.5/1.5 kW -Speed: 1420/2930 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 480/210/H230 mm -Weight: 39 kg
Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/325/H301 mm -Weight: 72.5 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 63 rpm -Power: 0.8 kW -Construction: B3 -Shaft: Ø 38 x 80 mm -Protection class: IP 44 -Dimensions: 450/250/H280 mm -Weight: 36 kg
Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 x 25 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 180/114/H155 mm -Weight: 5 kg
Electric motor, three-phase motor -Power: 0.45 kW -Speed: 2815 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 56 -Number: 2x available -Price: per piece -Dimensions: 230/125/H120 mm -Weight: 7 kg
Three-phase motor, electric motor -Drive motor from a VEB SIP315x500 cylindrical grinding machine -Power: 3 kW -Speed: 1430 rpm -Construction: B5 -Dimensions: 480/265/H248 mm -Weight: 42 kg
Three-phase motor, electric motor -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 410/213/H240 mm -Weight: 36 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 16/31.5 rpm -Power: 0.3/0.55 kW -Construction: B3 -Shaft: Ø 48 x 110 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 580/250/H270 mm -Weight: 43 kg
Three-phase motor, electric motor -Foot defective, see photo -Power: 4 kW -Speed: 2880 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 405/195/H230 mm -Weight: 34.5 kg
turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 220 mm turning length: 200 mm control: Siemens Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 920 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 250/166/H185 mm -Weight: 11 kg
Three-phase motor, electric motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 190/110/H155 mm -Weight: 4.9 kg
various blow molds available from stock. More information on request
Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...
Baler V20X | 20t press for cardboard, foil, paper, waste Baler, packaging press V20X | 006 With a pressing force of up to 25 tons, the V20X can efficiently compact cardboard, plastic, paper, textiles and food waste. Recommended for markets, department stores, hotels and all other users who have to deal with average amounts of waste and have to work at low ceiling heights. Bale size: 800 mm H (variable) × 1100 mm W × 750 mm D Bale weight: 200–300 kg Pressing time: 35 seconds Pressing force: up to 25 tons Dimensions: 1970 mm H × 1695 mm W × 865 mm D Filling opening: 1100 mm W × 625 mm H Integrated bale ejection mechanism Weight: 980 kg Power supply: Three-phase, 380/400 volt 3 kW motor Noise: 74 decibels DIN EN 16500 IP54 protection class E-Power Standards PLC light indicator "Bale full" and "Automatic pressing process"
Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: D 53245050 -Current: 150 70 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Output: 3x 230 V -Output frequency: 0-120 Hz -Number: 1x converter available -Price: per piece -Dimensions: 205/250/H190 mm -Weight: 6 kg/piece
Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...
Bale size: 600 mm H (variable) × 600 mm W × 400 mm D Bale weight: 15–30 kg Pressing time: 35 seconds Pressing force: up to 8 tons Dimensions: 2500 mm H × 765 mm W × 575 mm D Integrated bale ejection mechanism Hinged door Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Weight: 415 kg Noise: 70 decibels DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification Made in EU OPTIONS Collecting tray for residual liquid Suitable for use at sea Electronic weighing system Annual maintenance contract Solar powered Galvanized or stainless steel V5HD PRESS FOR CANS & BOTTLES Fast, efficient and easy to use: The V5HD effortlessly presses aluminium cans and PET bottles to make them easier to dispose of. Recommended for restaurants, pubs, bars and special recyclers. Hinged door and 35-second pressing time Integrated bale ejection mechan ...
Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.
Vibronics Ultrasonic Bath Brand: Vibronics Power 1.8 kw; Serial number: 6092 Total dimensions L: 2800 mm; W: 1700 mm; H: 930 mm; Tank size: WxHxD= 1350x720x990 mm Frequency 25 kHz equipped with 4x generators
Viesse pump RB316BGT with electric motor recon Ball bearings renewed from rotor The pump was overhauled with the following new parts: - Impeller - Mechanical seal - Gasket set - Valve flap
Suction conveyors with side channel compressor and time control various capacities available
electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC -Dimensions: 1000/255/H98 mm -Weight: 140 kg
Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg
maximum number of results exceeded
please refine your search
