index v used for sale

240V, 50HZ, 0.75KW, 2.8A, 1420RPM FACTORY F40

General: Max. workpiece diameter: 140 mm Chuck diameter: 250 mm Max. turning length: 700 mm Gauge I: Tool carrier I: Tool turret (X/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 310 mm Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Sub-spindle (OP20): motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: 2+2 jaw power chuck Clamping Cylinder: Full Clamping Cylinder, Hydraulic C-axis: 0.01° Gauge III: Tool carrier II: Tool turret (X/Y/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 620 mm Y-axis: 50 mm (+ 22/ - 28 mm) Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Gauge IV: Main spindle (OP30): Movable motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: Co ...

Key data: 750 mm, 400 mm, 500 mm

Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine

General SKU262M292 MakeOnbekend, typeplaat ontbreekt Mounted on legscheck Main Features MaterialStainless steel Volume150 Ltr. Motor0.65 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity150 Ltr Vessel sizesdia. 500x800mm Dished bottomcheck Dished top sidecheck Manhole/handgat dia. 150mm Top connections2x dia. 25mm Outletdia. 25mm With propellor stirrercheck Motor0,65 KW, 230/400 Volt MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld Floorspace0,7x0,7 M Total height1,9 M Weight220 KGStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Vertical Machining Center MIKRON VCE1200+

General SKU409X1229 MakeNetzsch LocationBarneveld CEcheck TypeStativrührer Main Features MaterialStainless steel Volume43 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Open stirring vesselcheck Capacity43 Ltr. Vessel sizesø 300 x 600 mm Conical bottomcheck Flat top sidecheck With covercheck Outletø 30 mm With turbo stirrercheck With dissolver stirrercheck Motor1,1 kW (Ex) Speed mixing shaft1000 rpm Information No.2800170-11 Year of construction2016 Mounted on legscheck Floorspace1,1 x 1 m Total height2,3 m Weight400 kg ATEX compatiblecheck Extra SpecificationsWe have the bottom disk for this one in the box of the Netzsch rs 2/PM is informed, guess spacer is a problem to install : easy / BRFStirring vesselsNetzschStirring vessels > Stirring vesselsBrand > Netzsch What you can expect from Foeth: -- Machine is ...

General SKU268N283 MakeWilhelm Schmidt TypeGEV 1000 No.94.0119 Year of construction2006 LocationBarneveld Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1120 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel Capacity1120 Ltr Vessel sizesdia. 1200mm x1300 mm Dished topcheck Dished bottomcheck Max. temperature-60/50 degr.C. Information Floorspace2,6 x 1,4 M Total height1,8 M Weight400 KG Extra Specificationswith collectbinPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg

Digital Microscope Controller for VHX-7000 Series Console for VHX-7000 Camera Unit High Performance Camera VHX 7020 Tripod (motorized in XYZ 100mm) VH Zoom Lens 20x-200x Tripod adapter for VH-Z20 Polarization adapter for VH-Z20 3D Measurement Software for VHX-7000 Bracket for VHX-S770E/750E Viewing by telef. Arrangement possible used, bought as seen, without warranty Price = 53000.00 € + VAT Invoice due upon readiness for shipment or delivery

Number of axes: 3, control: Fanuc OMA, operating hours: 4708h, with tool magazine. An on-site inspection is possible.

Diametro Tavola Rotante: 1000 Posizioni Tavola: 2 Canali caldi: 8

General SKU268N301 MakeWilhelm Schmidt TypeGEX 1000 No.93.0127 Year of construction2007 LocationBarneveld Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1080 Ltr. Pressure1 Bar Specified Features - Pressure vessel Capacity1080 Ltr Vessel sizesdia.800 x 2300 mm Dished topcheck Dished bottomcheck Max. temperature-60/50 °C MaterialStainless steel Information Floorspace2,9 x 0,9 M Total height0,9 M Weight300 KGPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU268N282 MakeWilhelm Schmidt TypeGEX 1000 No.93.0126 Year of construction2007 LocationBarneveld Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1080 Ltr. Pressure1 Bar Specified Features - Pressure vessel Capacity1080 Ltr Vessel sizesdia. 800mm x2300mm Max. temperature-60/50 degr.C. MaterialStainless steel Information Floorspace2,9 x 0,9 M Total height0,9 M Weight300 KGPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU104U694 MakeZiemann Ludwigsburg No.507690/10 Year of construction1986 Mounted on legscheck Pressure Working pressure0.05 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor1.6 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity120 Ltr Vessel sizesdia. 500x500mm Dished bottomcheck Flat top sidecheck Top connections(5x) Outlet± dia. 30mm With paddle stirrermake Ekato, type SD 30.126 Motor0,66/1,3 KW, 380 Volt (Ex) MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace1,1x0,8 M Total height2,1 M ATEX compatiblecheckStirring vesselsZiemannStirring vessels > Stirring vesselsBrand > Ziemann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine.

This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details.

This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information.

This 3-axis DART VMC650 XL/A T.S was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1000 × 500 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the DART VMC650 XL/A T.S vertical machining centre we have for sale. Contact us for further details.

This 3-axis AXA VSC-1-M/C was manufactured in 1997. It features an X-axis travel of 2240 mm, Y-axis travel of 420 mm, and Z-axis travel of 480 mm. The machine is equipped with a Heidenhain CNC TNC 407 control system and has a tool changer capacity of 22 tools. If you are looking to get high-quality machining capabilities, consider the AXA VSC-1-M/C vertical machining centre we have for sale. Contact us for further details.

This 3-axis AXA VSC-2M was manufactured in 1991. It features a CNC control type and has an approximate total connected load of 20 kW. With around 13,063 operating hours, this machine represents an opportunity for high-quality machining capabilities. If you are looking to get high-quality machining capabilities, consider the AXA VSC-2M vertical machining centre we have for sale. Contact us for further details.

This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details.

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

Vemag vacuum filling machine with lifter for 200 liter meat bins, model: HP12E, number: 1650655, year of construction: 2016, 400-460 V, 3 Ph, 50/60 Hz, 27 A, 16 kW, Vemag vacuum pump, type: KC 0040 D IZ0, serial number: D15251636, year of construction: 2015, capacity: 40 m³ per hour, dimensions: 2300 mm x 1380 mm x 2050 mm.

Vemag vacuum filling machine with lifter for 200 liter meat bins, model: DP10E, number: 1570100, year of construction: 2016, 400-460 V, 3 Ph, 50/60 Hz, 25 A, 15 kW, dimensions: 2250 mm x 1400 mm x 2120 mm.

General SKU251U336 MakePfaundler LocationBarneveld TypeCH 4000 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity4440 Ltr. Vessel sizes1400x3200 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100, DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC MaterialGlass - Enamel (WWG-9115) Information No.66058 Year of construction2000 Mounted on legscheck Floorspace1,5x1,5m Total height4,1m Weight1790 kgPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!

General SKU050C445 Mounted on framecheck Pressure Working pressure0.0005 Bar Main Features Volume160000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Capacity160 m3/Hr With motor7,5 KW, 400 Volt (Ex) Information LocationBarneveld Floorspace1,4x1,1 M Total height2,1 M ATEX compatiblecheck Technical specs Extra information0,5 mbar Enddruck (abs)Vacuum pumpsDiscountRietschlePumps > Vacuum pumpsDiscountBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU050C446 Mounted on framecheck Pressure Working pressure0.0005 Bar Main Features Volume160000 Ltr. Motor6.8 KW Specified Features - Vacuum pump Capacity160 m3/Hr With motor6,8 KW, 400 Volt (Ex) Information LocationBarneveld Floorspace1,5x1,4 M Total height1,8 M Weight1150 KG ATEX compatiblecheck Technical specs Extra information0,5 mbar Enddruck (abs)Vacuum pumpsDiscountRietschlePumps > Vacuum pumpsDiscountBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU035F151 LocationBarneveld MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) Information Year of construction1982 Mounted on legscheck With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra SpecificationsMixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kWProcessing vesselsNew arrivalsFryma KorumaProcessing vessels > Pro ...

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 365 U/min milling motor:37 kW ram head dimension:240 x 240 mm max. ram stroke:1250 mm total power requirement:133 kVA weight of the machine ca.:50 t dimensions of the machine ca.:11 x 5 x 6,4 m Machine was overhauled in 2008 by OEM New control CNC SIEMENS 840 D automatic tool changer 72-pcs C-axis with driven tools Angle-, straight tool holders with CAPTO holder Coolant device Chipconveyour

x-travel:1660 mm y-travel:760 mm z-travel:660 mm weight of the machine ca.:8700 t dimensions of the machine ca.:4.320 x 3.380 mm distance spindlenose - table min./max.:808 mm distance work spindle /surface of the table:155 - 815 mm Machine height:2850 mm floor space required (w/o switchgear cabinet):4.320 x 3.380 mm spindle motor:11 (10 Minuten) /7,5 (30 Minuten)/ 5,5 (Dauerbetrieb) kW tool taper:SK 40 Spindle RPM:40 - 7.000 (Standard ) / 40 - 10.000 ( Option ) 1/min surface area:2.000 x 760 mm max. table load:1.000 kg feeds X-axis:1 - 5.000 mm/min rapid traverse X-axis:24.000 m/min rapid traverse Y-axis:24.000 feeds Y-axis:1 - 5.000 mm/min feeds Z-axis:1 - 5.000 mm/min rapid traverse Z-axis:20.000 m/min

x-travel:600 mm y-travel:410 mm z-travel:520 mm tool change unit:16 turning speeds:8000 1/min control:SIEMENS 810 shopmill table surface area:840 x 420 mm rapid traverse X- and Y-axis:36 m/min rapid traverse Z-axis:20 m/min taper ISO:SK 40 spindle drive:15 kW weight of the machine ca.:2,5 t space requirements approx. LxWxH:2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on"

x-travel:1270 mm y-travel:660 mm z-travel:610 mm table surface area:1500 x 660 mm table load:1,3 t control:ULTIMAX 4 turning speeds:10000 1/min spindle:15 kW Tool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/min tool change unit:24 Pos. total power requirement:30 kVA weight of the machine ca.:9,5 t dimensions of the machine ca.:4,8 x 4,56 x 2,95 m vertical machining center, el. handwheel, chipconveyor,

faceplate diameter:2000 mm swing diameter:2130 mm turning height:1400 mm ram stroke range:1000 mm workpiece weight:10 t faceplate turning speed range:1 -200 U/min main drive:60 kW total power requirement:95 kW weight of the machine ca.:24 t dimensions of the machine ca.:6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1270 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min max. workpiece weight:6.000 kg milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 (8 x 100 mm) mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Weld-on part with VTN / Martin old small mount, Dimensions of the mount:, Bolt diameter: 50 mm, Handle/mounting width: 190 mm, Bolt spacing [center - locking plate]: 320 mm

General SKU327X695 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck 2x Capacity2x 150 l. Vessel sizesø 700 x 800 mm Top connectionsDN25, DN40 OutletDN25 Information TypeR409/454 No.M702-723865 Mounted on legscheck in frame Floorspace1,90 x 1,00 m Total height2,20 m Weight500 kg Extra SpecificationsQVF Glass Receiver System – 2 × 150 L Receiver Flasks with Coil Heat Exchanger (Condenser/Cooler)Vertical tanksNew arrivalsQVF GlasstechnikTanks > Vertical tanksNew arrivalsBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

General SKU015E073 MakeSeitz Werke GmbH Bad Kreuznach TypeVacubloc Drehfilter Year of construction1982 LocationBarneveld Main Features MaterialStainless steel Motor0.18 KW Surface6 m2 Specified Features - Rotating vacuum filter Rotating vacuum filter(1x) Filter surface6,0 m2 Drum sizesdia. 900x2050mm Motor0,18 KW, 220/380 Volt With variable speed driveTrough without stirrer With knife dischargecheck Manual operatedcheck With vacuum pumpmake SIHI, type LPHE-40516 Motor5,5 KW, 380 Volt With vacuum vesselcheck With liquid pumpmake Netzsch, type NU-50 Motor1,3/1,8 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace3,9x1,7 M Total height1,8 M Weight1400 KGRotating vacuum filtersDiscountSeitz - WerkeFilters > Rotating vacuum filtersDiscountBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condit ...

General SKU081B448 MakeSeitz Enzinger Noll AG TypeVacubloc Drehfilter Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor0.75 KW Surface8 m2 Specified Features - Rotating vacuum filter Rotating vacuum filter(1x) Filter surface8,0 M2 Drum sizesdia. 1200x2120mm Motor0,75 KW, 220/380 Volt With variable speed drivecheck With knife dischargecheck With vacuum pumpmake SIHI, type LEHA-450 Motor15,0 KW, 380/660 Volt With vacuum vesselcheck With liquid pumpcheck Suitable for pre-coatcheck MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace4,1x1,9 M Total height2,6 M Weight2100 KGRotating vacuum filtersDiscountSeitz - WerkeFilters > Rotating vacuum filtersDiscountBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...

General SKU035T171 LocationBarneveld Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor2.2 KW Inlet diameter400 mm Specified Features - Rotating valve MaterialStainless steel Rotary valvecheck Rotor diameter400mm Rotor width480mm Inletdia. 400mm Inlet flange sizesdia. 540mm Outletdia. 400mm Outlet flange sizesdia. 540mm With motor2,2 KW, 230/400 Volt Rotor speed± 36 Rpm Information Floorspace1,2x0,6 M Total height0,6 MRotating valvesDiscount-Rotary valves > Rotating valvesDiscountBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!