137,838 used machines on RESALE, but how to find them? Machine Search
Distance between points: 2300 mm, Min/max speed plate: 23/888 rpm., Speed number of plate: 12, Diameter over the bench: 720 mm, Diameter over carriage: 400 mm, Diameter of the plate: 300 mm, bar pitch: 57 mm, Counterbore cone nozzle: MORSE 4, Main engine power: 11 KW, Long: 3200 mm, Width: 1400 mm, Tall: 1400 mm.
centre distance: 1500 mm : 3 weight: 3 t : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic scantlings lathe Manufacturer: Hempel Model No.: VKR For the production of small turned parts from a long rod. Turning, bowing, parting off is automatic Starting material / max. rod length: 700mm Max. turning length: 64 mm Max. turning diameter: 64 mm
Code: 0410 Brand: CMC - ITALY Model: LT 1500 Lathe with copying device for wood and similar materials Technical specifications: Max centre distance 1500 mm Centre height 240 mm Max working diameter (without copying device) 450 mm Copying device with manual handwheel feed Gouge rest Tailstock Spindle speed rpm 600/1000/1500/2000 Motor power 1,5 Hp three-phase Overall dimensions mm 2430 x 730 x 1230 h Weight kg 340
Harrison 150mm Metric (L6) Lathe 3-speed 380V motor runs smoothly! Forward and reverse rotation. Geared spindle drive, gears run in oil. Spindle speeds adjustable from 45 to 1000 RPM. Spindle coupling for changing speed while the motor is running. Automatic feed in longitudinal and cross directions. Tapping threads is possible and easy thanks to the Norton gearbox. Removable machine bed for turning larger diameter workpieces. MT3 tailstock taper. Center distance: 600 mm Center height: 170 mm Spindle bore: 37 mm Dimensions: 170 x 70 x 130 cm Made in Great Britain. Includes accessories as shown in the pictures!
Emco Maximat V10-P Lathe. 3-speed 380V, 2-stage motor runs smoothly! Forward and reverse rotation. Geared spindle drive, gears run in oil. 8 spindle speeds adjustable from 60 to 2500 RPM. Automatic feed in longitudinal and cross directions. Norton gearbox for easy thread cutting. Metric. MT2 tailstock taper. Emco quick-change tool post with 7 holders. Made in Austria! Includes accessories as shown in the last two pictures at the front of the machine. The machine is in very good condition! Center distance: 650 mm Center height: 125 mm Spindle bore: 22 mm Overall dimensions: 125 x 55 x 40 cm
WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg
Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement.
turning diameter: 250 mm swing diameter: 250 mm turning height: 250 mm Control: Siemens Sinumerik 840 D total power requirement: 60 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The largest diameter of the workpiece mm. 4000 The largest diameter of the workpiece above the caliper mm. 3200 Maximum length of workpiece mm.20000 Main motion motor power kW 160 Largest tonn part weight. 160 Machine tonn weight. 314...
vibratory feeder diameter range 3,5-10 mm total screw length 150 mm output - pieces/min 28 head dia. 24 mm max.
Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg
Key data: 300 mm, 175 mm
Padovani E200 lathe mechanical situation 100% Siemens Simodrive 611 mainspindle fault, Siemens CNC.
A CNC slant bed lathe Focus is offered. Swing diameter over bed: 600mm, max. turning diameter: 330mm, max. turning length: 669mm, spindle bore: 88mm, spindle speed: 3400rpm, travel X/Z: 260mm/762mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, tool stations: 12, tool holder: VDI40, quill diameter: 85mm, tailstock taper: MK4, controls: Siemens. Weight: approx. 5700kg, machine dimensions: X/Y/Z: approx. 3600mm/1800mm/1800mm. Inspection possible by appointment.
The roughing and copying steels are provided with fine adjustments. Template adjustment can be adjusted from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feeds for turning highly profiled workpieces. Drive motor 400V/3kW with electric motor brake Two speed levels can be adjusted via belt belts, within the stages it is possible to work continuously via frequency converter. Speed level 1: 200 - 2000 rpm Speed level 2: 350 - 3400 rpm Center width approx. 1550mm Copy length with bezel approx. 1350mm Bed length approx. 2100mm Feed infinitely adjustable, rapid decline with safety limit shutdown Hydraulic copy carriage with V-lathe steel Spindle with M33 thread and MK3 inner cone Tailstock MK3 and with quick-release device Lots of accessories: Ring bezel with pre-turning steel and insertion aid Four-ja ...
engine lathe, year 2018, CNC Z32. Used machine. More info & price on IndustrialBuyer.
digital: ja multifix: ja : ja documentation: ja bed bridge: ja good condition: ja centre distance: 1800 mm : 530mm serial number: 0556 hollow: 60 mm weight: 3,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maximum turning diameter: 2800 mm Maximum swing diameter: 3000 mm diameter of spindle flange: 1100 mm control: Siemens 840 D sl Table rpm: 230 1/min Maximum speed of driven tools: 6000 1/min x-travel: 2700 mm z-travel: 1000 mm Feed - X: 24 m/min feed capacity - x: 22 kN tool taper: CAPTO C8 total power requirement: 200 kVA dimensions of the machine ca.: 10,4 x 6.3 x 5,7 m weight of the machine ca.: 120 t Equipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dörries Contumat VCE 2000-160Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:1991 / 2010Control system retrofit:2010Control system:Siemens 840 DslCircumferential diameter:2,000 mmTurning diameter:1,600 mmTurning height:1,800 mmTable / Faceplate:Technology:Gear-driven tableSpeed:315 rpmPower:105 kWMax. torque:50,000 NmFaceplate:1,600 mmMax. table load:12,000 kgTool carrier:Crossbeam travel (vertical):1,200 mmChisel slide travel:1,500 mmSupport travel (horizontal):2,300 (+/-1,150) mmPenetration diameter:340 mmChisel slide cross-section:240 x 240 mmEquipment:Tool magazine:20 stationsChip removal:Chip conveyorCoolant supply:Coolant system with filterTool measurement:ProbeSet-up:Electronic handwheelTool holders:Various tool holdersControl system overhaul:Year of overhauling:2010Technol ...
General Manufacturer: Emco Type: Emcomat EM17D Year of Make: 1996 Travel: X 220 mm Z 710 mm Working spindle Speed: 3,000 rpm Spindle bore: 50 mm Rotary diameter over bed: 340 mm Rotary diameter over slide: 190 mm Turning length: 700 mm Spindle holder: DIN55029 Tool holder: Multifix B Quill stroke: 120 mm Dimensions and weight Dimensions: 1,650 mm x 1,060 mm x 1,635 mm Weight: approx. 755 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tailstock MK3 3-jaw chuck Schunk 4-jaw chuck Face Plate 4x Multifix holder B
Inv. Num. : 9289 Type: Tandem 400 Producer: FAMAR Created: 2013 Parameters: Table diameter: 480 mm Max. workpiece diameter: 400 mm Max. length of the workpiece: 300 mm Number of Spindles: 2
Key data: 700 mm, 7000 mm
Inv. Num. : 9290 Type: LHDS Producer: LIEBER Created: 1992 Parameters: Maximum turning length: 7000 mm Maximum turning diameter over bed: 700 mm Lathe chuck diameter: 400 mm Equipment: 3x self-centering bezel Milling head Support Tip Tool Holder
Code: 0433 Brand: ZACCARI - ITALY Model: T 95 Lathe with copying device for wood and similar materials, cork and various Technical specifications: Max centre distance 950 mm Centre height 210 mm Max machining diameter 400 mm 3-jaw chuck Copying device with feeding Gouge rest Tailstock Variable speed Motor power 1 Hp Overall dimensions mm 1700 x 600 x 1100 h Weight kg 300
Manufacturer: CMZ Model: TC20-YS/800 Type of machine: Turning center with driven tools, CNC lathe Year of manufacture: 2010 Control: Fanuc 31iT HVi with manual guide i Spindle configuration: main and counter spindle Collet system: Axfix collet system C-axes: HS and GS fully functional C-axes Turret: 16-position BMT turret, all stations driven Bar loader: 1-meter short bar loader from LNS Rod opening: 65 mm Hours 86K is control time 16.5K is runtime 17.5K is processing time Tool holders: 2 VK25 external turning holders, 2 D40 internal turning holders 4 D25 internal turning holders 3 axial driven tools 3 radial driven tools Find more here - .ucymachines/ Contact us at - sales@ucymachines
A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible.
turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC cycle-controlled lathe VDF is offered. Max. swing diameter over bed: 420mm, max. swing diameter over slide: 235mm, max. turning length: 1000mm, main spindle bore: 51mm, max. spindle speed: 3000rpm, motor power: 11kW, tool size X/Y: approx. 25mm/25mm, rapid traverse X/Z: 5m/min/10m/min, tailstock quill diameter: 70mm, tailstock quill stroke: 110mm, tailstock taper: MT4, thread pitch range: 0.1mm-2000mm, control: Siemens Sinumerik, weight: approx. 3000kg, machine dimensions X/Y/Z: approx. 3400mm/2000mm/1800-2200mm. Inspection possible by appointment.
Manufacturer: Traub Year of Manufacture: 2002, factory overhaul completed 2018 Model: TNK 36 Type of Machine: CNC automatic lathe Operating Hours: approximately 147,007 hours, as of June 2026 CONTROL SYSTEM - Control: TX8i (64 bit), 14 inch flat screen - Additional V24 RS232 interface in the control cabinet - MDE interface in control cabinet, machine running and piece counter - Thread cutting without compensating chuck - Polyform function for C-axis - Tool monitoring MAIN SPINDLE - Spindle bore: 36 mm - Maximum speed: 6,300 rpm - Drive power: AC 6.7 / 10.7 kW - C-axis - Change parts: Hainbuch - Mounting aid base body - Manual Hainbuch change device COUNTER SPINDLE - Counter spindle as motor spindle - Spindle bore: 32 mm - Maximum speed: 6,300 rpm - Travel Z4: 250 mm - Rapid traverse Z4: 30 m/min - C-axis - Device for counter clamping pressure - Workpiece ejector device - Increa ...
CONTROLS Point-to-point control (NC) HEIDENHAIN BASIC FUNCTIONS number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 320 mm turning diameter (max): 150 mm worpiece length max.: 750 mm MAIN SPINDLE spindle revolutions (max): 4000 /min drive power: 16 kW TAILSTOCK sleeve diameter: 60 mm taper: MK 4 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 2500 kg ATTACHMENTS (TURNING) European CE standards: yes 6000 Hours
Manufacturer: HAAS Year of Manufacture: 07/2012 Model: ST-30 Type of machine: CNC Lathe Voltage: 360-480 V Phase: 3 Frequency: 50/60 Hz Full load amps: 70 amps Interrupting capacity: 10,000 amps Included equipment: bar feeder Condition: motor and gearbox fault present, requires repair Find more here - .ucymachines/ Contact us at - sales@ucymachines
centre height: 120 mm spindle bore: 20 mm copying device: ja kW weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: . mm turning length: . mm control: 2x 840 D : Kühlmittelsystem chip conveyor: ja kW generator - rated current: 95,00 A connected load: 65,00 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Distance between centres: 1200 mm Speed: A) 70 - 380 U/min. turning speeds: B) 380 - 2000 U/min weight: 2,2 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1250 mm swing diameter: 1450 mm turning height: 1200 mm slide adjustment: 800 mm side head - cross travel: 600 mm digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhauled in 1996 Machine is cycle-controlled with Heidenhain Positip New control panel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
turning diameter over bed: 2200 mm turning diameter over slide rest: 1650 mm turning length: 6000 mm 0: 75 kW coolant: spindle turning speed range: 2,8-600 U/min spindle bore: 102 mm Height of centres: 1100 mm accessories:: Planscheibe, Futter accessories:: Lynetten total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your vi ...
faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1500 mm Control: Siemens type: 880T Table load: 6000 kg cross rail - adjustment: 700 mm Max ram stroke: 1000 mm turning speeds: 400 U/min transmission ratio: 2 Feed: 3-8000 mm/min Tool changer: chip conveyor: total power requirement: 69 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...
faceplate diameter: 3500 mm swing diameter: 4100 mm turning height: 1400 mm Control: Siemens Slide movement horizontal longitudinal: 2100 slide adjustment: 1300 mm cross rail adjustment: 1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulM ...
turning diameter: 800 mm turning length: 2000 mm control: Monfort R&D turning diameter over slide: 520 mm spindle hollow: 88 mm total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: 4,2x2,2x1,9 m - Standard chuck diameter: 315/400/500 mm Work spindle drive: - Siemens Three-phase servo drives with mechanical safety clutch - Maximum Z-axis feed force: 23.9 kN - Maximum X-axis feed force: 11.3 kN - Rapid traverse speed Z-axis: 6.8 m/min - Rapid traverse speed X-axis: 4 m/min Tool setup: - Multifix quick-change tool post Tailstock: - Outer quill diameter: 120 mm - Maximum quill stroke: 210 mm - Internal taper: MK6 Capacities: - Hydraulic oil tank approx.: 15 l - Additional lubricating oil tank approx.: 6 l - Coolant tank approx.: 120 l - Coolant tank for chip conveyor approx.: 260 l The tech. Data are manufacturer or operator information and therefore non ...
faceplate diameter: 850 mm swing diameter: 1200 mm turning height: 1000 mm Control: Siemens type: 840 D Tool changer: 36 Pos. x-travel: 870 mm z-travel: 1020 mm : live tooling: c-axis: 0 weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTe ...
swing diameter: 2200 mm centre distance: 9500 mm turning diameter over bed: 2200 mm workpiece weight: 70 t turning speeds: . U/min 4-jaw-chuck diameter: 2100 mm control: Siemens type: Sinumerik 850 T mm transmission ratio: . total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: m Single Carriage Tailstock Hydrostatic Bed Chip Conveyor Serial Number: 27486 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appo ...
Diameter of the table: 3000 mm turning diameter: Max. 5500 mm column travel: 1000 mm table turning speeds: 82 U/min table load: max. 25 t turning height: 2000 mm weight of the machine ca.: 75 t dimensions of the machine ca.: m Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoT ...
turning diameter: 1020 mm turning length: 4000 mm turning diameter over slide: 720 mm Holder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: U/min turning speeds: U/min bed width: 560 mm spindle bore: 200 mm workpiece weight: kg faceplate: 1000 mm make: Forkhardt PSA 1000 3 jaw chuck Forckrath: 500 mm steady: 263 mm steady: 500 mm total power requirement: KVA weight of the machine ca.: t dimensions of the machine ca.: 7,4x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your bus ...
faceplate diameter: 2500 mm swing diameter: 2800 mm turning height: 2200 mm table load: 15 t turning speeds: U/min Feed: mm/U digital readout: Rest: 2 Side head: total power requirement: 55 kW weight of the machine ca.: 56 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solutio ...
faceplate diameter: 4770 mm swing diameter: 10000 mm turning height: 3500 mm table load: 100 t turning speeds: 40 U/min table drive: 125 kW Control: Siemens type: 840 D Rest: 1 slide adjustment: 1421 mm ram head dimension: 250x250 mm inclination: +/-30 ° live tooling: 16 Kw spindle taper ISO: 50 spindle turning speed range: 3000 U/min chip conveyor: total power requirement: 150 kW weight of the machine ca.: t dimensions of the machine ca.: m Machiney Refurbished 2003 Table extension up to 8000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, ...
faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 1750 mm slide adjustment: 1000 mm table load: 18 t turning speeds: 43,7 U/min Control: Siemens type: 840 D mm Rest: 2 chip conveyor: ram head dimension: 250x250 mm live tooling: 36 kw total power requirement: 85 KVA weight of the machine ca.: 64 t dimensions of the machine ca.: 8x5,8x8 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visi ...
turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 6000 mm workpiece weight: 30 t turning speeds: 100 U/min : total power requirement: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m Maschinennaummer 5110 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the softw ...
turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 5000 mm workpiece weight: 25 t turning speeds: 0,6-300 U/min : 4-jaw-chuck diameter: 800 mm control: Siemens transmission ratio: 3 total power requirement: 100 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m Renishaw Probe Depth of profile with 80mm tool 355mm @ 1400mm dia. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment ...
turning diameter: 650 mm turning length: 2000 mm control: MTC K turning diameter over slide rest: 360 mm turning speeds: 1800 U/min 3-jaw chuck: 315 mm Holder Multifix: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solutio ...
maximum number of results exceeded
please refine your search
