index cnc lathe used for sale

turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45711-151

Turning diameter 490 (over bed) mm Turning length 1500 mm Control Grundig Manual Plus Turning diameter 280 (via face slide) mm Travel - x 260 mm Bed width 350 mm Spindle holder Size 8 Spindle bore 65 mm Morse taper MK 5 Quill diameter 70 mm Quill Stroke 160 mm Drive power 12/16 (100/60% ED) kW Speed range 1 - 3000 rpm Control CNC Control Name Heidenhain Manual Plus Auction-ID: A7-45768-20

Technical data Manufacturer: EMCO Model: EMCOMAT 20D Year of Make: 2008 Voltage: 400V/3~ Frequency: 50 / 60 Hz Rated current: 10.3 A Speed ranges: 40 – 3000 rpm Configuration Machine Type: Conventional lathe 3-jaw chuck: RÖHM Ø 200 mm Digital position display: X and Z axis Thread Table: Available Coolant device: available Auction-ID: A1-45711-304

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible.

Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Code: 0363 Brand: DM Model: T/1000 Wood lathe with single-phase copying device for shaping and turning any wooden workpiece Technical specifications: Single-phase motor 220 V – Power 1000 W Center distance 1000 mm Max turning diameter 340 mm n° 4 adjustable speeds (850 - 1250 - 1750 - 2510 rpm) Belt-driven speed change Spindle connection 1" 8 TPI 4-jaw self-centering chuck Base Overall dimensions mm 1500 x 600 x 1200 h Weight kg 52

Turned grinding machine OMA COSBO 120 Working length 1200mm Two grinding units Oscillating Polishing Brushes Work after the copier

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-256

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45833-327

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-327

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45834-309

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45833-251

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45834-251

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45833-256

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45833-309

A conventional lathe Zimmermann with some modification measures is available. Turning diameter over bed: 1000mm, turning length: 430mm, distance between centers: 1000mm, 3-support travel: 500mm/300mm/200mm, chuck diameter: 250mm. Documentation available. An on-site inspection is possible.

Vöest, E50/2000, Lining, Multifix, 15KW, Mas. No. 07351501

Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication

Type: OptiTurn TM3310D metal lathe with digital readout (3-axis) Connection voltage: 400 V Motor power: approx. 1.5 kW Center height: 165 mm Center distance: 1000 mm Max. swivel diameter above bed: approx. 330 mm Max. turning diameter above cross slide: approx. 216 mm Spindle bore: 38 mm Spindle holder: Camlock DIN ISO 702-2 No. 4 Spindle Taper: MK5 Speed range: approx. 65 – 2000 rpm (9 levels) Longitudinal feed: approx. 0.02 – 0.4 mm/rev Cross feed: approx. 0.01 – 0.2 mm/rev Thread cutting: metric and inch Cross carriage travel: approx. 168 mm Travel of the upper slide: approx. 90 mm Tailstock mount: MK3 Pile stroke: approx. 100 mm Guides: hardened and ground prism bed Accuracy (spindle run): < 0.015 mm Dimensions (lxwxh): approx. 1760 × 745 × 1320 mm Weight: approx. 470 kg Features: 1 x Kit 5-piece quick-change holder 1 x Turning Tool Set WP 16 mm 7pcs ...

Description WEILER E110 conventional lathe with automatic cycle Machine unused in the guides, as only plastic parts were manufactured. Details Type E110 Year of construction 1998 Center width 3,000 mm Center height 550 mm Circumferential diameter over bed 1,100 mm Circumferential diameter over face slide 730 mm Bed width 600 mm Spindle head according to DIN 55027/55026 Gr. 15 Spindle diameter in the front bearing 235 mm Spindle bore 165 mm Machine dimensions 5,400 x 2,600 x 2,120 mm incl. documentation

Unchecked Auction-ID: A1-45973-56

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible.

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11, Interchangeable Wheels , Other EMCO Parts: Clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

Support, travel carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

CNC LATHE Inv. No. 13.113C1 Make PBR Model T30 SNC x 1500 Control SIEMENS 805T Year 1996 Centre Distance 1.500 mm Max. Swing over Bed Ø 600 mm Max. Swing over Cross Slide Ø 410 mm Max. Swing in Gap Ø 960 mm Spindle Bore Ø 105 mm R.P.M. 47 – 2.000 (in 2 ranges) kW 15/22 Volts 400 Cycles 50 Including: Automatic Turret, 8 positions Enclosed guarding Coolant Auction-ID: A1-45737-172

CONVENTIONAL LATHE Inv. No. 12.959C1 Make MONDIALE Model NEW CELTIC12 Serial number NJC12740731X90 Center distance 500 mm Max. swing over bed Ø 305 mm Max. swing over cross slide Ø 170 mm Spindle bore Ø 28 mm R.P.M. 35 – 1,500 (16x) HP 1.46 Volts 380 Cycles 50 Including: 3-jaw chuck Ø 160 mm Brake Coolant Auction-ID: A1-45737-124

CONVENTIONAL LATHE Inv. No. 13.188C1 Make PINACHO Model S-90/180 Mach.no. 22417 Centre Distance 750 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross Slide Ø 205 mm Spindle Bore Ø 42 mm R.P.M. 30 – 2000 kW 2.2/3.4 Volts 400 Cycles 50 Including: 3-Jaw Chuck Ø 200 1 x Steady Rest Toopost Rapid Original type A Coolant attachment Auction-ID: A1-45737-179

Make COLCHESTER Model BANTAM 2000 Serial number 3/0015/00964 Center distance 750 mm Max. swing over bed Ø 330 mm Max. swing over cross slide Ø 220 mm Spindle bore Ø 32 mm R.P.M. 40 – 2.000 HP 3/2.5 Volts 400 Cycles 50 Including: 3-jaw chuck Rapid tool post Emergency stop. Threading Coolant system Safety protection screen Auction-ID: A1-45737-16

Centre Distance 1.000 mm Max. Swing over Bed Ø 400 mm Max. Swing over Cross slide Ø 200 mm Spindle bore Ø 54 mm R.P.M. 22.4 – 2,000 (24x) kW 5.5 Volt 380 Cycles 50 Auction-ID: A1-45737-150

TEACH IN LATHE Inv. No.: 12.689C1 Make CHEVALIER Model FCL40160 Mach. No. X7895C01 Control SIEMENS 810D Centre Distance 4.000 mm Max. Swing over Bed Ø 1.015 mm Max. Swing over Cross Slide Ø 670 mm Spindle Bore Ø 134 mm R.P.M. 0 – 1.200 kW 22/33 Volts 400 Cycles 50 Including: 1 x Steady Rest Ø 300 mm Chip Conveyor 4 Way Automatic Toolpost Fixed toolpost multifix Hydraulic chuck 380mm Auction-ID: A1-45737-4

TEACH IN LATHE Inv. No. 11.581C1 Make CAZENEUVE Model HBCN S575 Year 1995 Mach.no. 9810 Control SOMAB PL+S3 Centre Distance 1.500 mm Max. Swing over Bed Ø 575 mm Max. Swing over Cross Slide Ø 300 mm Centre Height Ø 250 mm Spindle Bore Ø 51 mm R.P.M. 2 ranges 0 – 3000 kW 18,5 Volts 400 Cycles 50 Auction-ID: A1-45737-102

TEACH-IN LATHE Inv. No. 13.224C1 Make TOS TRENS Model SUI500 COMBI Serial number 69005015010003 Control heidenhain Center distance 1500 mm Max. swing over bed Ø 500 mm Max. swing over cross slide Ø 290 mm Spindle bore Ø 71 mm R.P.M. 8 – 2.800 KW 11 Volts 380 Cycles 50 Including: 3-jaw chuck Emergency stop. Threading Coolant system Safety protection screen problem in cabling Auction-ID: A1-45737-196

Make PBR Model TM200P Centre distance 1.250 mm Max. Swing over Bed Ø 400 mm Max. Swing over Cross-slide Ø 210 mm Max. Swing in Gap Ø 600 mm Spindle bore Ø 55 mm R.P.M. 33 – 1,500 (12x) KW 4 Volts 380 Cycles 50 Accessories: Taper turning attachment Quick change toolpost Coolant Auction-ID: A1-45737-13

Centre distance 1.100 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross-slide Ø 180 mm Max. Swing in Gap Ø 480 mm Spindle bore Ø 40 mm R.P.M. 33 – 1,500 (12x) KW 4 Volts 380 Cycles 50 Accessories: Quick change toolpost Coolant Auction-ID: A1-45737-18

TEACH IN LATHE Inv. No.: 13.110C1C Make CHEVALIER Model FCL1840 Mach. No. X186A005 Control FAGOR 800TGI Centre Distance 1.000 mm Max. Swing over Bed Ø 460 mm Max. Swing over Cross Slide Ø 230 mm Spindle Bore Ø 58 mm R.P.M. 40 – 2,000 HP 7.5 Volts 400 Cycles 50 Including: 1 x Steady Rest Fixed toolpost multifix 3-jaw chuck Auction-ID: A1-45737-170

CONVENTIONAL LATHE Inv. No. 13.223C1 Make OPTIMUM Model D660x3000DPA Serial number 2-130 Center distance 3000 mm Max. swing over bed Ø 660 mm Max. swing over cross slide Ø 440 mm Spindle bore Ø 105 mm R.P.M. 25 – 1.600 HP 7.5 Volts 400 Cycles 50 Including: 3-jaw chuck Emergency stop. Threading Coolant system Safety protection screen D.R.O. 2 axes Auction-ID: A1-45737-195

CNC SINGLE COLUMN VERTICAL BORING MILL Inv. No.: 12.769D1 Make PITTLER Model PV1600 Control SIEMENS 880 Year of Manufacture 1995 Max Swing Ø 1600 mm Table diameter 1500 mm Z-Travel 800 mm X-Travel 1600 mm B-axis 360,000 Table speeds 2.8 – 450 rpm Driven tooling speed 0 – 5000 rpm Driven tooling type SK50 Rapids 12 m/min Motor 90 KW Electrics 440V – 3Ph – 50 Cycles Dimensions 9200 x 6900 x 4740 mm Weight of Machine 31500 KG Including: A.T.C., 20 Positions Flood Coolant Through spindle coolant Interlock guards Twin swarf conveyor Auction-ID: A1-45737-5

CONVENTIONAL LATHE Inv. No. 13.038C1 Make TOS Model SUI 50 Serialnumber 150200900558 Centre Distance 2000 mm Max. Swing over Bed Ø 500 mm Max. Swing over Cross Slide Ø 320 mm Max. Swing in gap Ø 560 mm R.P.M. 14 – 2240 kW 7 ,5 Volts 400 Cycles 50 Including : DRO Coolant Emergency stop Safety protection over chuck Auction-ID: A1-45737-133

CONVENTIONAL LATHE Inv. No. 13.114C1 Make STANKO Model 1M635 Center distance 3.000 mm Max. swing over bed Ø 700 mm Max. swing over cross slide Ø 380 mm Spindle bore Ø 76 mm R.P.M. 10-1250 (16x) kW 15 Volts 380 Cycles 50 Including: 3-jaw chuck Auction-ID: A1-45737-174

TEACH-IN LATHE Inv. No. 13.051C1 Make CMT URSUS Model URSUS PLUS 250 Year 1996 Serial number 12628 Centre Distance 1.000 mm Max. Swing over Bed Ø 480 mm Max. Swing over Cross slide Ø 400 mm Spindle bore Ø 105 mm 2 ranges stepless 0 – 2.000 kW 8/11 Volt 380 Cycles 50 Including Toolholder Multifix 3-jaw chuck Ø 315 Auction-ID: A1-45737-161

Spindle support for SUI 80 longitudinal direction

(3x) Lathe chucks (3- and 4-jaw) with loose jaws and accessories. Auction-ID: A1-45979-46

Speed: from 35 to 3000 rpm Spindle passage: approx. 45 mm Center length: approx. 600 mm Center height above bed: approx. 180 mm Turning diameter over bed: approx. 360 mm Center height above support: 130 mm Turning diameter over support: approx. 260 mm The machine is equipped with a tailstock, a lathe steel holder and a three-jaw chuck from the manufacturer RÖHM, diameter: 160 mm and a two-axis digital display from the manufacturer FAGOR Auction-ID: A7-46287-75

Works perfectly The frame is supplied with the hardware Set of gouges supplied with the lathe Auction-ID: A3-43519-36014