130,396 used machines on RESALE, but how to find them? Machine Search
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
Automatic ingredient dosing and weighing with recipe computer Suitable for dusty, crushed, crystalline, granular products such as salt, sugar, baking aids, spices Dimensions: Length: 3760 mm Width: 750 mm Height: 1880 mm 14 containers with a volume of up to 60 litres Stainless steel Discharge type:Vibro-discharge apparatus 0.085 kW Discharge via: Weighing conveyor belt Dosing accuracy: 10 to 15 grams Dosage quantity/component: up to 10 litres Total dosage: up to 20 litres Discharge capacity: 2 - 10 kg/min (depending on the material)
Beckhoff C6220 Industrial Control Cabinet PC for Heinen( Diana Control) Control Jagenberg Diana Pro. Used, tested.
Key data: 2500 kN, 618 g/PS, 60 mm
Krauss Maffei 250-1400CX Injection Molding Machine with Robot and Gas Boost (225) Item number: 225 Availability: In stock Year of Make: 2016 Brand: KRAUSS MAFFEI Specifications Injection weight: 618 g Injection flow: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Spray pressure: 2005 bar Tiebar spacing: 630x630 mm Clamping plate size: 1135x1180 mm Tool installation height min.: 330 mm Plate spacing max: 1150 mm Control: MC6 Language: German Power: 70 kW Hours: 23170 h Weight: 15000 kg Dimensions: 6.5x2.3x2.3 m Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes Heating Ducts: Yes Gas storage: Yes
SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.
General description Industrial tumblast shot blasting machine manufactured by OMSG (Officine Meccaniche San Giorgio), designed for batch processing of small to medium metal parts. Suitable for cleaning, deburring, descaling, and surface preparation in foundry and metalworking environments. Technical details Manufacturer: OMSG (Italy) Year: 1993 Type: Tumblast / tumble belt shot blasting machine Operation: Electric with automated blasting cycle Configuration: Rotating perforated drum/belt system for bulk processing Blasting system: Internal chamber designed for steel shot blasting (turbine-based typical configuration) Loading: Pneumatic front door with actuator Control: Electrical control cabinet with contactors, relays, and frequency inverter (ELDI/DF) Dust extraction: Integrated filtration/separation unit with vertical filter and ducting Application: Batch treatment of sm ...
Test bench for power up to 2.2 KW Speed control Speed Switching Handheld remote control with cable for speed and rotation direction switching Data for converters see nameplate Connection cable CEE 32A Output CEE 16A Space requirement W - 600 x D - 650 x H - 1,750 mm rollable Weight approx. 85 kg
Pneumatic Injection Unit Kremlin A25 P air: 6 bar P prod. 6 bar Dimensions:45 x 160 x 45 mm
PERO – Industrial Parts Washer (Conveyor Type) General data: Manufacturer: Pero (KG Masch.- u. Apparate-Bau Ing. P. Erbel / Pero GmbH, Germany) Year of manufacture: 1992 Machine type: Industrial parts washer (continuous conveyor system) Condition: Used Weight: approx. 2500 kg Dimensions (L x W x H): approx. 4000 x 1800 x 2000 mm Technical details: Power: approx. 12 – 18 kW Voltage: 380 V Frequency: 50 Hz Nominal current: approx. 18.9 A Heating capacity: approx. 12 – 18 kW Working conveyor width: approx. 300 – 400 mm Process: Multi-stage cleaning system: - Washing (chemical cleaning) - Rinsing - Drying (with pneumatic system) Equipment: Roller conveyor feed system Filtration tank Pump unit Enclosed cleaning chamber PLC-based control panel (older generation) Description: Industrial conveyor-type parts washer designed for continuous cleaning and ...
Electrical coil connecto General description Mixed industrial spare parts lot including electrical, hydraulic, mechanical components, and consumables. Suitable for maintenance, repair operations (MRO), or parts recovery. Technical details Type: Industrial spare parts (mixed lot) Configuration: Assorted components stored in bins Electrical components: - Circuit breakers and protection modules (ETI) - Control relays and timers - Terminal blocks and connectors Cables and sensors: - Industrial wiring harnesses - Metal-sheathed cables (likely temperature probes / sensors) Hydraulic / pneumatic components: - Valve blocks and fittings (KBP / similar) - Brass valves and connectors - Actuator housings Mechanical parts: - Gears, bushings, couplings - Bearings and sleeves Consumables: - Bulbs (Philips) - Lubricants and chemical tubes Application: Maintenance and spare parts ...
Equipped with 2 HBM weighing sensors Auction-ID: A1-45845-33
Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm
Twist drill bits with internal cooling RWR SBV 11,000 65x70x12x118 ( SBV11,65x70x12x118 ) with internal cooling IA52187 Ø 11.65 mm shank Ø 12 mm spiral length 70 mm total length 118 mm New !' Dimensions: 125 x 17 x 17 mm
Equipped with 4 weighing sensors Auction-ID: A1-45845-32
General description Industrial storage rack system with multiple bins containing assorted fasteners, fittings, and workshop components. Suitable for maintenance departments, workshops, or resale as a bulk hardware lot. Technical details Type: Industrial storage system with contents Configuration: Multi-level steel rack with integrated storage bins Contents include: - Bolts, screws, and threaded fasteners (various sizes, including labeled M24, M16, etc.) - Nuts, washers, and spacers - Industrial connectors (CEE plugs and sockets visible) - Small machined parts and metal components - Mixed workshop hardware and accessories Organization: Partially labeled bins (alphanumeric system visible) Quantity: Large volume across multiple compartments Application: Maintenance, repair, and industrial assembly environments Equipment - Steel shelving system - Metal storage bins (mult ...
Industrial plug, wall socket MARECHAL DN6 63-90S ( DN66390S ) 90 A 500 V matching plug EL1013 ! New ! Dimensions: 180 x 125 x 210 mm
Industrial plug, plug MARECHAL DN6 63-90S ( DN66390S ) 90 A 500 V suitable socket EL1012 ! New ! Dimensions: 260 x 125 x 115 mm
Hydraulic injection moulding machine manufactured in 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mold height of 1530 mm. It has a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG 420/810 - 2300 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2008. This HAITIAN MARS 5300/4500 features a clamping force of 530 tons and a minimum mold height of 240 mm. It includes a screw diameter of 80 mm and a shot volume of 2212 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MARS 5300/4500 machine we have for sale. Contact us for further details regarding this machine.
Digital Input Board ROTEC DIG 32-I ( DIG32-I ) 100-023 396 used ! Dimensions: 180 x 130 x 40 mm
Clocked power supply, electronic module KNIEL CPM 100/VME ( CPM100/VME ) 330-049-04 input: 110 / 220 V AC 45 - 440 Hz output: 5 V DC 12 A 2 x 12 V DC 2.0 A used, tested ! Dimensions: 190 x 70 x 130 mm
Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine.
OHAUS ISHD23CDG refrigerated incubator with orbital agitation OHAUS Stirrer Incubator Reference: ISHD23CDG Year of manufacture: 2012 Movement: Orbital, 25 mm Capacity: 22.7 kg at 125 rpm and 4.53 kg at 500 rpm Temperature range: -15 °C to 65 °C Uniformity: ± 0.5°C to 37°C Speed range: 15 rpm to 500 rpm Tray dimensions: 457 mm x 457 mm Dimensions: 596 mm x 815 mm x 675 mm Drive System: Triple Eccentric Brushless DC Motor Internal dimensions (H x W x W): 432 mm x 523 mm x 629 mm Net weight: 131.7 kg Power supply: 220 V Power consumption: 800 W Safety certification: TÜV Speed Accuracy: Above 100 RPM ± 1%, Below 100 RPM ± 1 RPM Speed range: 15 to 500 rpm Timer: 1 second to 160 hours Housing: Aluminum Operating Conditions: 15°C to 32°C, 80% RH, non-condensing
Infrared switch, infrared sensor with contamination signal WENGLOR UF55PBV 10 - 30 VDC diameter sensor: Ø 30 mm approx. 2 m Connection cable New ! Dimensions(packaging): 135 x 125 x 45 mm
Inrush current limiter BAUMÜLLER 3WMSV-3-16/50-001 91301227 spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 240 x 180 x 100 mm
maximum number of results exceeded
please refine your search
100 € 
